Review of efficiencies of cogeneration units using internal combustion engines

The most frequently used technology in cogeneration units up to 10 MWe are internal combustion engines and the majority of the models are up to 500 kWe. There are dozens of reciprocating internal combustion engine–based cogeneration unit manufacturers and more than hundred suppliers in the market. In the article, data from supplier technical specifications of 583 units (34 manufacturers) is collected and analyzed. The authors proposed mathematical relations that show dependence of efficiencies on electric power that can be used for initial feasibility studies. Authors also have showed that value of 0.75 for power-to-heat ratio (proposed by EU Directive 2004/8/EC) does not always correspond to current market situation.     

A wind tunnel test of newly developed personal bioaerosol samplers

In this study the performance of two newly developed personal bioaerosol samplers was evaluated. The two test samplers are cyclone-based personal samplers that incorporate a recirculating liquid film. The performance evaluations focused on the physical efficiencies that a personal bioaerosol sampler could provide, including aspiration, collection, and capture efficiencies. The evaluation tests were carried out in a wind tunnel, and the test personal samplers were mounted on the chest of a full-size manikin placed in the test chamber of the wind tunnel. Monodisperse fluorescent aerosols ranging from 0.5 to 20 microm were used to challenge the samplers. Two wind speeds of 0.5 and 2.0 m/sec were employed as the test wind speeds in this study. The test results indicated that the aspiration efficiency of the two test samplers closely agreed with the ACGIH inhalable convention within the size range of the test aerosols. The aspiration efficiency was found to be independent of the sampling orientation. The collection efficiency acquired from these two samplers showed that the 50% cutoff diameters were both around 0.6 microm. However the wall loss of these two test samplers increased as the aerosol size increased, and the wall loss of PAS-4 was considerably higher than that of PAS-5, especially in the aerosol size larger than 5 microm, which resulted in PAS-4 having a relatively lower capture efficiency than PAS-5. Overall, the PAS-5 is considered a better personal bioaerosol sampler than the PAS-4.     

Measurement, Collaborative Learning and Research for Sustainable Use of Ecosystem Services: Landscape Concepts and Europe as Laboratory

Policies at multiple levels pronounce the need to encompass both social and ecological systems in governance and management of natural capital in terms of resources and ecosystems. One approach to knowledge production and learning about landscapes as social–ecological systems is to compare multiple case studies consisting of large spaces and places. We first review the landscape concepts’ biophysical, anthropogenic, and intangible dimensions. Second, we exemplify how the different landscape concepts can be used to derive measurable variables for different sustainability indicators. Third, we review gradients in the three dimensions of the term landscape on the European continent, and propose to use them for the stratification of multiple case studies of social–ecological systems. We stress the benefits of the landscape concepts to measure sustainability, and how this can improve collaborative learning about development toward sustainability in social–ecological systems. Finally, analyses of multiple landscapes improve the understanding of context for governance and management.     

INTEGRATING DIFFUSEINONPOINT POLLUTION CONTROL AND WATER BODY RESTORATION INTO WATERSHED MANAGEMENT1

ABSTRACT: The objective of water quality/watershed management is attainment of water quality goals specified by the Clean Water Act. The Total Maximal Daily Load (TMDL) planning process is a tool to set up watershed management. However, TMDL methodologies and concepts have several problems, including determination of Loading Capacity for only low flow critical periods that preclude consideration of wet weather sources in water quality management. Research is needed to develop watershed pollutant loading and receiving waters Loading Capacity models that will link wet and dry weather pollution loads to the probability of the exceedence of water quality standards. The long term impact of traditional Best Management Practices as well as ponds and wetlands, must be reassessed to consider long term accumulation of conservative toxic compounds. Socioeconomic research should focus on providing information on economic and social feasibility of implementation of additional controls in water quality limited watersheds.     

Long term and short term coastal line changes of the Eastern Gulf of Finland. Problems of coastal erosion

Traditionally the coastal zone of the easternmost (Russian) part of the Gulf of Finland has not been considered as an area of active litho- and morphodynamics, but a recent study has shown that the easternmost part of the coastal zone suffers from erosion. Within some coastal segments the shoreline recession rate reaches 2 ?C 2.5?m/year. As well as determining the hydrodynamic reasons for recent erosion acceleration, important geological and geomorphic features of coastal zone which influenced the lithodynamics were established. The Kurortny District of St.Petersburg is located along the northern coast of the Gulf of Finland to the west of the St. Petersburg Flood Protection Facility. It has special importance as a unique recreation zone of the North-West of Russia. Coastal erosion is one of the most serious problems of the area. The analysis of historical materials, archive aerial photographs and modern high-resolution satellite images have shown that advancing parts of coast are almost non-existant with most sections of the coast being eroded and further retreating. Field monitoring between 2004 and 2007 showed intense damage to sandy beaches during autumn and winter storms and progressive erosion of the dunes system. Among the most important natural reasons for the erosion processes are that the coastline is open to storm waves induced by westerly and south-westerly winds, the geological structure of coastal area (easily eroded Quaternary deposits) and a sediment deficit. In some areas sediment loss was the result of the submarine coastal slope morphology (a steep slope of a narrow submarine terrace within the area of sediment drift discharge), with erosion of an alongshore submarine sandy terrace and erosion runnels at the depth 8?C12?m. The situation becomes worse due to anthropogenic impact. The southern coastal zone dynamics are also very active. According to an aerial and satellite photos analysis from 1975?C1976 to 1989?C1990, sandy beaches to the west of Lebyazhye village were eroded up to 30?m, and near Bolshaya Izora village up to 70?m. The comparison of coastine GPSsurvey with old nautical and topographic charts published in the 1980s shows the considerable change.     

Rare earth elements upon assessment of reasons of the geophagy in Sikhote-Alin region (Russian Federation), Africa and other world regions

Rocks eaten by wild animals on the Bolshoy Shanduyskiy kudur in the Sikhote-Alin region (Russian Federation) are zeolite–clay mineral complexes—products of weathering of zeolitized vitric tuffs of rhyolite composition, deposited in aqueous medium within the volcanic caldera of about 55 million years ago. By composition of rock-forming oxides, the tuffs refer to high-potassium calc-alkaline series. In trace elements of most favorite kudurites of the Bolshoy Shanduyskiy kudur, there are significantly increased contents of most of rare earth elements (2–5 times in comparison with surrounding rocks). The results of our analysis of geological and geochemical data on kudurs and kudurites in another part of the Sikhote-Alin, as well as on other regions of the world (particularly, in Africa and Indonesia), taking into account new data on the prevalence of rare earth elements in living matter and their medical and biological properties, enable us to consider the version of causal connection of the geophagy with rare earth elements.     

Natural attenuation of petroleum hydrocarbons—a study of biodegradation effects in groundwater (Vitanovac,Serbia)

The role of natural attenuation processes in groundwater contamination by petroleum hydrocarbons is of intense scientific and practical interest. This study provides insight into the biodegradation effects in groundwater at a site contaminated by kerosene (jet fuel) in 1993 (Vitanovac, Serbia). Total petroleum hydrocarbons (TPH), hydrochemical indicators (O₂, NO₃^?, Mn, Fe, SO₄^2?, HCO₃^?), δ¹³C of dissolved inorganic carbon (DIC), and other parameters were measured to demonstrate biodegradation effects in groundwater at the contaminated site. Due to different biodegradation mechanisms, the zone of the lowest concentrations of electron acceptors and the zone of the highest concentrations of metabolic products of biodegradation overlap. Based on the analysis of redox-sensitive compounds in groundwater samples, redox processes ranged from strictly anoxic (methanogenesis) to oxic (oxygen reduction) within a short distance. The dependence of groundwater redox conditions on the distance from the source of contamination was observed. δ¹³C values of DIC ranged from ??15.83 to ??2.75‰, and the most positive values correspond to the zone under anaerobic and methanogenic conditions. Overall, results obtained provide clear evidence on the effects of natural attenuation processes—the activity of biodegradation mechanisms in field conditions.     

Seasonal trends of atmospheric nitrogen dioxide and sulfur dioxide over North Santa Clara, Cuba

Atmospheric nitrogen dioxide (NO₂) and sulfur dioxide (SO₂) levels were monitored simultaneously by means of Radiello passive samplers at six sites of Santa Clara city, Cuba, in the cold and the warm seasons in 2010. The dissolved ionic forms of NO₂ and SO₂ as nitrate and sulfite plus sulfate, respectively, were determined by means of ion chromatography. Analysis of NO₂ as nitrite was also performed by UV–Vis spectrophotometry. For NO₂, significant t tests show good agreement between the results of IC and UV–Vis methods. The NO₂ and SO₂ concentrations peaked in the cold season, while their minimum levels were experienced in the warm season. The pollutant levels do not exceed the maximum allowable limit of the Cuban Standard 39:1999, i.e., 40 μg/m³ and 50 μg/m³ for NO₂ and SO₂, respectively. The lowest pollutant concentrations obtained in the warm season can be attributed to an increase in their removal via precipitation (scavenging) while to the decreased traffic density and industrial emission during the summer holidays (e.g., July and August).     

Evaluation of physical sampling efficiency for cyclone-based personal bioaerosol samplers in moving air environments

The need to determine occupational exposure to bioaerosols has notably increased in the past decade, especially for microbiology-related workplaces and laboratories. Recently, two new cyclone-based personal bioaerosol samplers were developed by the National Institute for Occupational Safety and Health (NIOSH) in the USA and the Research Center for Toxicology and Hygienic Regulation of Biopreparations (RCT & HRB) in Russia to monitor bioaerosol exposure in the workplace. Here, a series of wind tunnel experiments were carried out to evaluate the physical sampling performance of these two samplers in moving air conditions, which could provide information for personal biological monitoring in a moving air environment. The experiments were conducted in a small wind tunnel facility using three wind speeds (0.5, 1.0 and 2.0 m s(-1)) and three sampling orientations (0°, 90°, and 180°) with respect to the wind direction. Monodispersed particles ranging from 0.5 to 10 μm were employed as the test aerosols. The evaluation of the physical sampling performance was focused on the aspiration efficiency and capture efficiency of the two samplers. The test results showed that the orientation-averaged aspiration efficiencies of the two samplers closely agreed with the American Conference of Governmental Industrial Hygienists (ACGIH) inhalable convention within the particle sizes used in the evaluation tests, and the effect of the wind speed on the aspiration efficiency was found negligible. The capture efficiencies of these two samplers ranged from 70% to 80%. These data offer important information on the insight into the physical sampling characteristics of the two test samplers.