A large-scale outdoor atmospheric simulation smog chamber for studying atmospheric photochemical processes: Characterization and preliminary application

Understanding the formation mechanisms of secondary air pollution is very important for the formulation of air pollution control countermeasures in China. Thus, a large-scale outdoor atmospheric simulation smog chamber was constructed at Chinese Research Academy of Environmental Sciences (the CRAES Chamber), which was designed for simulating the atmospheric photochemical processes under the conditions close to the real atmospheric environment. The chamber consisted of a 56-m³ fluorinated ethylene propylene (FEP) Teflon film reactor, an electrically-driven stainless steel alloy shield, an auxiliary system, and multiple detection instrumentations. By performing a series of characterization experiments, we obtained basic parameters of the CRAES chamber, such as the mixing ability, the background reactivity, and the wall loss rates of gaseous compounds (propene, NO, NO₂, ozone) and aerosols (ammonium sulfate). Oxidation experiments were also performed to study the formation of ozone and secondary organic aerosol (SOA), including α-pinene ozonolysis, propene and 1,3,5-trimethylbenzene photooxidation. Temperature and seed effects on the vapor wall loss and SOA yields were obtained in this work: higher temperature and the presence of seed could reduce the vapor wall loss; SOA yield was found to depend inversely on temperature, and the presence of seed could increase SOA yield. The seed was suggested to be used in the chamber to reduce the interaction between the gas phase and chamber walls. The results above showed that the CRAES chamber was reliable and could meet the demands for investigating tropospheric chemistry.     

Influence of particle size on the aggregation behavior of nanoparticles: Role of structural hydration layer

More and more attention has been paid to the aggregation behavior of nanoparticles, but little research has been done on the effect of particle size. Therefore, this study systematically evaluated the aggregation behavior of nano-silica particles with diameter 130–480 nm at different initial particle concentration, pH, ionic strength, and ionic valence of electrolytes. The modified Smoluchowski theory failed to describe the aggregation kinetics for nano-silica particles with diameters less than 190 nm. Besides, ionic strength, cation species and pH all affected fast aggregation rate coefficients of 130 nm nanoparticles. Through incorporating structural hydration force into the modified Smoluchowski theory, it is found that the reason for all the anomalous aggregation behavior was the different structural hydration layer thickness of nanoparticles with various sizes. The thickness decreased with increasing of particle size, and remained basically unchanged for particles larger than 190 nm. Only when the distance at primary minimum was twice the thickness of structural hydration layer, the structural hydration force dominated, leading to the higher stability of nanoparticles. This study clearly clarified the unique aggregation mechanism of nanoparticles with smaller size, which provided reference for predicting transport and fate of nanoparticles and could help facilitate the evaluation of their environment risks.     

舰船环境适应性设计方法探索与实践

探索舰船环境适应性的设计方法,以提高舰船在各种复杂环境下的适应能力。分析了舰船环境适应性设计中面临的若干问题和改进提高方向,参考借鉴国内外航空航天、电子等行业成功经验,提出了指导舰船环境适应性设计的主要设计原则和工作内容。围绕改善环境条件、加强耐环境能力设计这2个方面,提出了3种环境适应性设计方法,包括基于规范的设计方法、基于环境仿真的设计方法、基于预使用验证的设计方法。根据舰船风浪环境适应性设计的特点和要求,选择采用环境仿真和模型试验技术开展了应用研究。基于分析结果,提出了增加水线面系数、调整浮心、优化线型等多项改进措施建议。采用环境仿真和模型试验相结合的方式,可有效支撑舰船风浪环境适应性设计和评估,这一方法具有较高的工程推广应用价值。另外,未来应加大环境仿真技术的研究和应用力度,尝试开展多因素综合环境仿真,以进一步提高舰船的环境适应性。     

基于热带海洋大气环境下机载PCB板的环境适应性对比研究

目的 通过机载PCB板(Printed Circuit Board,PCB)在热带海洋大气环境下的腐蚀老化特征和电气性能退化规律分析,研究其在热带海洋大气环境下的环境适应性。方法 根据热带海洋大气环境中PCB板的实际使用环境大多为舱室内部封闭或半封闭的情况,分别设计并开展海南万宁海洋平台棚下暴露场和某海域环境户外简易遮蔽玻璃框下3 a的自然环境试验。结果 PCB板的焊点、焊盘、印制导线以及引线头等部位在2种试验环境中均出现了不同程度的腐蚀破坏,试验后期,所有部位的腐蚀程度全部达到了4级,导通电阻从几十毫欧增大至几十兆欧,绝缘电阻从10 GΩ以上降低至几兆欧。结论 在万宁站试验2 a和某海域试验3 a后,PCB板均不满足耐电压的技术要求(500 V交流电压60 s),万宁海洋平台棚下暴露场对PCB板的环境适应性更为严酷。     

汽车零部件金属卤素灯阳光模拟试验与户外自然曝晒的相关性研究

目的 探究汽车零部件金属卤素灯阳光模拟加速试验与户外自然曝晒的关系。方法 使用3种典型高分子透明材料分别进行阳光模拟加速试验、AIMBOX/Arizona户外曝晒和Florida户外曝晒,基于试验后样品的黄变值,比较阳光模拟试验与户外曝晒的相关性,并对阳光模拟试验与户外曝晒的加速性进行探讨。结果 阳光模拟（IP/DP箱）加速试验与AIM BOX/Arizona户外曝晒高度相关,综合加速倍率约是AIM BOX/Arizona户外曝晒的3倍。阳光模拟（IP/DP箱外）加速试验与Florida户外曝晒高度相关,综合加速倍率是Florida户外曝晒的7倍。结论 基于3种典型材料研究可知,汽车零部件阳光模拟加速试验与典型户外自然曝晒具有一定相关性。     

氯化处理船舶压载水对外来生物存活的影响

初步研究了氯化处理船舶压载水对外业生物存活的影响。结果表明，氯化自理对杀灭中的细菌最为有效；对单细胞灌类则依种类需要不同浓度的有效氯，有的种类在４０ｍｇ／Ｌ有效氯作用下依然能存活。     

垃圾焚烧飞灰物理化学性质的实验研究

应用激光粒度粒形分析仪、灰熔融性测定仪、原子吸收光谱仪和XRD等仪器手段对国内2种垃圾焚烧飞灰的密度、颗粒特性、熔点、成分和晶相结构等物理化学性质进行了详细的研究。研究发现，2种灰样颗粒直径的数量积分分布非常接近，其中基本没有超过40 μm的颗粒。由于垃圾焚烧飞灰在化学成分上存在的差异导致了其熔点有很大的不同。此外，XRD结果显示不同来源的飞灰其晶相结构存在较大的差别，这可能与垃圾的来源和焚烧工艺以及烟气处理方法有关。实验结果为飞灰无害化低温烧结工艺的选择和运行参数的制定提供了依据。     

SBR工艺处理高盐度生活污水试验

针对海水冲厕产生的高含盐生活污水,试验采用SBR工艺分别研究了不同海水盐度的污水中有机物的降解及氨氮的去除情况。结果表明,在高盐度污水的生物处理系统中,污泥的驯化是关键的一步。有机物和氨氮的去除率总体上随着盐度的增大而降低,但在海水冲厕范围内(海水比例在30%内,盐度为10500mg/L,Cl-为5700mg/L),海水盐度对有机物及氨氮的去除影响不大。     

膜生物反应器工艺处理高浓度前处理印染废水研究

膜生物反应器技术是一种新型的膜分离技术与生物处理技术相结合的污水处理技术。试验采用一体式膜生物反应器处理印染废水前处理废水(印染工艺中的退浆、煮炼、漂白、丝光废水)。试验选择外压式聚偏氟乙烯(PVDF)中空纤维微滤膜,膜孔径为0.4μm,壁厚为100μm,稳定状态产水量为10L/(h·m2)。试验研究了沉淀池、膜生物反应器(MBR)、膜组件对废水COD、SS、色度、氨氮等的去除效果;试验探讨了污泥负荷、温度、溶解氧等因素对去除效果的影响。由于盐度高,原水直接进水,好氧生物反应器处理效果不佳,试验采用1:1稀释进水。在系统稳定运行期间废水COD去除率≥70%,出水SS为0,出水无异味。文章还得出了试验的最佳操作参数为T=25℃;HRT=18h;DO=3mg/L;pH:7.5～8.5;MLSS=8g/L。     

亚超临界水技术在废旧尼龙6解聚中的应用

研究了尼龙6在亚超临界水中的解聚反应,以期为废旧尼龙6的回收利用提供技术参数.实验分别利用气质联用仪和紫外分光光度计对解聚后的液相产物进行定性和定量分析,并考察了不同的反应温度、反应压力和反应时间对液相产物收率的影响.结果表明,液相产物绝大部分为己内酰胺;解聚的最佳条件为370 ℃、25 MPa、60 min;己内酰胺最大收率为96%.通过动力学分析和Arrhenius关系计算,得出尼龙6亚超临界水解聚的活化能为64.4 kJ/mol.