Modelling the Balance of Metals in the Amended Soil for the Case of ‘Atmosphere–Plant–Soil’ System

Changing the concepts of economic development and introducing new amendments can hardly decrease the accumulation in the soil of such pollutants as metals, remaining there for a long time. The predictive models for describing the balance of metals in the soil, which are based on the ‘atmosphere–plant–soil’ system and reflect the complicated physical–chemical nature of the metals’ migration, expressed by coefficients obtained in long-term observations in natural conditions, allow for evaluating long-term concentration of metals in the soil. The model BALANS evaluates self-purification of soil, taking into account the uptake of metals of aerogenic origin by the soil together with amendments, their physical–chemical migration and the type of microrelief determining its intensity as well as the absorbed biomass of plants and the removal of metals with crops. In this model, the half-period of metals’ washing out from the soil, found for the microrelief characteristic of low places, exceeds 200 years for Ni, Cr and Pb and makes 90 and 150 years for Zn and Cu, respectively.     

On the Environmental Efficiency of Water Storage: the Case of a Conjunctive use of Ground and Rainwater

Rainwater harvesting, consisting in collecting runoff from precipitation, has been widely developed to stop groundwater declines and even raise water tables. However, this expected environmental effect is not self-evident. We show in a simple setting that the success of this conjunctive use depends on whether the runoff rate is above a threshold value. Moreover, the bigger the storage capacity, the higher the runoff rate must be to obtain an environmentally efficient system. We also extend the model to include other hydrological parameters and ecological damages, which respectively increase and decrease the environmental efficiency of rainwater harvesting.     

The Role of Wind in Modeling of Oil Pollution Transport and Diffusion in the Persian Gulf

The Persian Gulf ecosystem is facing a variety of stresses as a result of being located within the richest oil province in the world, which hosts more than 67 % of the world oil reserve. In this paper, the distribution of oil pollution on the surface layer of the Persian Gulf is predicted for the different months after the release, based on the Coupled Hydrodynamical Ecological model for Regional Shelf seas (COHERENS). An Eulerian model for the Persian Gulf is set up using the Cartesian coordinate in the horizontal direction, and the sigma coordinate in the vertical direction. Based on this model, our analysis and simulation results indicate that the winds lead to diffusion of the contaminant concentration in the direction of the Arabian coast from the initial position of the spill. The results of this study can be used to provide appropriate solutions for preventing oil from spreading further in the region.     

宝钢焦化废水处理脱氮研究与实践

针对上海提高新排放标准中总氮(TN)≤35 mg/L的要求,对焦化废水进行了脱氮研究。选取现场缺氧-好氧-好氧(A-O-O)工艺中前两段的A-O生化沉淀池1出水,在SBR内进行反硝化脱氮实验,考察葡萄糖、葡萄糖+乙酸钠、甲醇和甲醇+乙酸钠单一或复合碳源及投加反硝化菌种对脱氮的影响,确定最佳碳源为甲醇+乙酸钠,最佳反硝化水力停留时间为16 h。当反硝化菌液投加浓度为1 mg/L时,SBR出水TN满足达标排放要求。结合实验结果对宝钢焦化废水原有AO-O工艺改造升级为A-O-A-O二段脱氮工艺,并对生化出水实施进一步的物化混凝处理。改造后,工艺长期运行稳定,最终出水完全达到上海市污水综合排放标准(DB 31/199-2009)TN≤35 mg/L的要求,并满足氰化物、氟化物以及COD的排放要求。     

废旧冰箱拆解聚氨酯泡沫塑料制备PU/PP复合材料

利用废旧冰箱拆解的聚氨酯泡沫塑料(PU)和聚丙烯(PP)、聚丙烯接枝马来酸酐(PP-g-MAH)为原料,采用物理化学回收技术制备PU/PP复合材料。用正交实验法分析PU填充量、PU粒径和PP-g-MAH 3个因素对PU/PP复合材料力学性能影响的显著性。结果表明,PU填充量对PU/PP复合材料拉伸性能有显著影响,对冲击性能和弯曲性能没有显著影响;在本文的实验范围内,PU粒径对PU/PP复合材料的力学性能影响不大;而PP-g-MAH投加量对PU/PP复合材料具有一定的影响。确定的优化工艺配方为:PU 40%;PU粒径选择2.00 mm;PP-g-MAH投加量10%。采用优化工艺制备的PU/PP复合材料的密度为1 042.88 kg/m3;冲击强度为2.9 kJ/m2;拉伸强度为10.30 MPa;拉伸模量为1 100 MPa;弯曲强度为18.5 MPa;弯曲模量为733 MPa。     

蚯蚓生态滤池中蚯蚓与植物对污水净化的作用评估

构建具有不同蚯蚓和植物配置的4个单级蚯蚓生态滤池,依次编号为A(无蚯蚓无植物)、B(有蚯蚓无植物)、C(有蚯蚓栽种芦苇)和D(有蚯蚓栽种水生鸢尾)。通过比较4个滤池在6个月实验期间对化学需氧量(COD)和总氮(TN)的去除效率,系统分析蚯蚓和植物对滤池去除污染物的影响。实验分2个阶段进行:5月上旬至9月上旬,滤池进水碳氮比恒定为6;9月中旬至11月中旬,滤池每周进水碳氮比交替为3、6、9。研究结果表明,蚯蚓对滤池去除COD有一定的促进作用,且作用强度显著受到进水碳氮比的影响。植物的存在与种类对滤池去除COD效率没有显著影响。蚯蚓和植物对滤池的TN去除效率都没有显著影响。滤池进水的碳氮比是显著影响滤池去除TN效率的主要因素。     

Concentrations,atmospheric partitioning,and air–water/soil surface exchange of polychlorinated dibenzo-p-dioxin and dibenzofuran along the upper reaches of the Haihe River basin,North China

Polychlorinated dibenzo-p-dioxin and dibenzofuran (PCDD/PCDF) were overall measured and compared in ambient air, water, soils, and sediments along the upper reaches of the Haihe River of North China, so as to evaluate their concentrations, profiles, and to understand the processes of gas–particle partitioning and air–water/soil exchange. The following results were obtained: (1) The average concentrations (toxic equivalents, TEQs) of 2,3,7,8-PCDD/PCDF in air, water, sediment, and soil samples were 4,855 fg/m³, 9.5 pg/L, 99.2 pg/g dry weight (dw), and 56.4 pg/g (203 fg TEQ/m³, 0.46 pg TEQ/L, 2.2 pg TEQ/g dw, and 1.3 pg TEQ/g, respectively), respectively. (2) Although OCDF, 1,2,3,4,6,7,8-HpCDF, OCDD, and 1,2,3,4,6,7,8-HpCDD were the dominant congeners among four environmental sinks, obvious discrepancies of these congener and homologue patterns of PCDD/PCDF were observed still. (3) Significant linear correlations for PCDD/PCDF were observed between the gas–particle partition coefficient (K _p) and the subcooled liquid vapor pressure (P _L ⁰) and octanol–air partition coefficient (K _oa). (4) Fugacity fraction values of air–water exchange indicated that most of PCDD/PCDF homologues were dominated by net volatilization from water into air. The low-chlorinated PCDD/PCDF (tetra- to hexa-) presented a strong net volatilization from the soil into air, while high-chlorinated PCDD/PCDF (hepta- to octa-) were mainly close to equilibrium for air–soil exchange.     

应用自动识别和定量系统评价两种污水再生工艺对微量有机污染物的去除效果

采用气质联用分析,并结合自动识别与定量系统(AIQS-DB)考察2种再生水厂采用的深度处理工艺对微量有机污染物的去除效果。结果表明,以污水为原水的膜生物反应器(MBR)+臭氧氧化+生物活性炭滤池(BAC)工艺用于再生水生产,MBR工艺对有机污染物的去除起主要作用;城市污水厂二级出水为原水的混凝沉降+浸没式超滤(SMF)/连续微滤(CMF)+部分反渗透(RO)+臭氧氧化工艺用于再生水生产,其SMF和CMF工艺段的膜截留作用均可有效消减有机污染物含量,SMF的效果优于CMF;2种工艺中采用的臭氧技术都能进一步加强部分物质的去除效果。气质联用结合AIQS-DB可用于再生水中污染物的筛查和不同污水再生工艺对微污染物消减效果的评价。     

悬挂链生物接触氧化工艺处理河道污水

采用悬挂链曝气式接触氧化工艺在3个时段内处理城市河道污水,通过采用磷脂法、TTC-脱氢酶活性法和MPN法研究载体表面生物膜特性,来验证装置的水质净化效果。结果表明,进水水质变化幅度较大的时段1内,水质对缺氧区和好氧区内生物膜量及活性有很大冲击,对污染物的去除效果影响不大,COD、NH+4-N、TN和TP的平均去除率分别达到75.9%、80.8%、64.6%和78.3%;进水水质稳定的时段2内,缺氧区和好氧区内生物膜量和活性要高于其他时段,COD、NH+4-N、TN和TP的平均去除率分别达到77.0%、80.6%、69.4%和55.3%;低温运行的时段3内,缺氧区和好氧区内生物膜量和活性都低于其他时段,水质净化效果明显下降,COD、NH+4-N、TN和TP的平均去除率分别为71.1%、68.5%、48.9%和46.6%。     

不同酶强化污泥为燃料微生物燃料电池特性对比分析

采用单室无膜悬浮阴极微生物燃料电池(MFC),对比分析了蛋白酶和淀粉酶强化剩余污泥为燃料的MFC(ESMFC)产电特性、酶特性和污泥减量化效果。研究表明,投加蛋白酶的ESMFC最大功率密度比对照组增加106.2%,投加淀粉酶时ESMFC最大功率密度比对照组增加48%。蛋白酶作用主要体现在投加后的前12小时,而淀粉酶作用时间则较长,为投加后的前144小时,但在运行前期,由于高温作用,导致系统内的酶活性较强,投加的淀粉酶作用则不明显。投加蛋白酶的系统内TCOD、TSS和VSS去除率分别为82%、65%和85%,而投加淀粉酶的系统内TCOD、TSS和VSS去除率分别达到86%、67%和88%。此研究对于ESMFC中外加酶的选择具有一定意义。