Smart Characterization—An Integrated Approach for Evaluating a Complex 1,4‐Dioxane Site

Smart characterization approaches apply the latest high‐resolution site characterization methods to find the contaminant mass flux, by integrating relative permeability mapping, classical hydrostratigraphy interpretation, and high‐density groundwater and saturated soil sampling. The key factor that makes Smart characterization different is the application of quantitative saturated soil sampling in less permeable slow advection and storage zones to diagnose plume maturity and understand its implications for remedy selection and performance. Because direct sensing tools like the membrane interface probe are capable of providing screening‐level assessments for hydrocarbons and chlorinated solvents in storage zones, but not 1,4‐dioxane, the recommended Smart approach involves application of specialized high‐capacity mobile laboratories or rapid turn‐around using fixed commercial labs. In addition to the benefit of rapidly characterizing sites, Smart characterization facilitates a flux‐based conceptual site model, which allows stakeholders to focus remedies on the mobile portion of the contaminant mass or, in effect, the mass that matters. Through systematic planning and implementation, predesign characterization can be completed to optimize source and plume remedy strategies, balancing investment in Smart characterization with reductions in total life‐cycle costs to ensure that an appropriate return on investigation is obtained.  © 2016 Wiley Periodicals, Inc.     

Effects of attached data-logging devices on little penguins (Eudyptula minor)

Data-logging devices are commonly used to study the foraging behaviour of individual seabirds. Such studies need to examine the potential effects of using devices on instrumented individuals, not only for ethical reasons but also to ensure the validity of data gathered. We studied the effects of two types of device (time-depth recorder and global positioning system) on little penguins (Eudyptula minor) during the 2010 and 2011 breeding season at Oamaru, New Zealand. Mixed-effect models were used to test for effects of devices by comparing changes in body weight, chick growth and breeding performance between instrumented and control individuals. We found no detectable effects of the attached devices on body weight change, hatching success, fledging success, chick growth parameters or adult survival. We conclude that it is possible to attach data-logging devices to adult little penguins for extended periods during the breeding season with minimal impacts.     

Communal nesting, kinship, and maternal success in a social primate

Communal nesting, where several mothers regularly pool and cooperatively rear offspring, is unusual in mammals. This type of crèching behavior is especially rare among primates, with the notable exceptions of humans, some nocturnal strepsirrhines, and—as we show in this study—black-and-white ruffed lemurs (Varecia variegata). Here, we combine data on nesting behavior, genetic relatedness, and infant survivorship to describe variation in ruffed lemur infant care and to examine the potential benefits of ruffed lemur communal breeding. Reproductive events were rare, and females produced litters (synchronously) only once in 6 years of observation. We show that not all mothers participate in communal crèches, but those that did had greater maternal success; communal breeders spent more time feeding and their offspring were more likely to survive. Although cooperating mothers were often related, females also cooperated with non-kin, and those who shared infant care responsibilities had greater maternal success than mothers who did not participate. If there is indeed a causal link between maternal cooperation and reproductive success, this unusual behavior, like that of human communal rearing, may have evolved via some combination of kin selection and mutualism.     

Microbial fouling of a reverse osmosis municipal water treatment system

Microbial fouling of a municipal water treatment system using reverse osmosis was investigated. From a combination of growth and molecular assays, it was discovered that the prefilter unit concentrated and facilitated microbial growth, and such growth led to microbial fouling of the reverse osmosis unit. Few cells were observed in the prefilter influent, but substantial microbial contamination was observed in the prefilter effluent, and this correlated with increasing headloss across the prefilter. The effluent caused microbial fouling of the leading elements of the reverse osmosis unit, as determined by reduced permeate flow, analysis of the elements, and assays of the membrane foulant. Both the introduction of microorganisms to the reverse osmosis unit from the prefilter unit and headloss across the prefilter could be effectively controlled through cleansing of the prefilter housing unit with sulfuric acid. Such treatments must be performed at appropriate intervals to prevent subsequent microbial growth in the prefilter unit.     

Evaluation of Sample Recovery of Malodorous Livestock Gases from Air Sampling Bags,Solid-Phase Microextraction Fibers,Tenax TA Sorbent Tubes,and Sampling Canisters

Abstract

Odorous gases associated with livestock operations are complex mixtures of hundreds if not thousands of compounds. Research is needed to know how best to sample and analyze these compounds. The main objective of this research was to compare recoveries of a standard gas mixture of 11 odorous compounds from the Carboxen/PDMS 75–μm solid–phase microextraction fibers, polyvinyl fluo–ride (PVF; Tedlar), fluorinated ethylene propylene copolymer (FEP; Teflon), foil, and polyethylene terephthalate (PET; Melinex) air sampling bags, sorbent 2,b–diphenylene–oxide polymer resin (Tenax TA) tubes, and standard 6–L Stabilizer sampling canisters after sample storage for 0.5, 24, and 120 (for sorbent tubes only) hrs at room temperature. The standard gas mixture consisted of 7 volatile fatty acids (VFAs) from acetic to hexanoic, and 4 semivolatile organic compounds including p–cresol, indole, 4–ethylphenol, and 2'–aminoacetophenone with concentrations ranging from 5.1 ppb for indole to 1270 ppb for acetic acid. On average, SPME had the highest mean recovery for all 11 gases of 106.2%, and 98.3% for 0.5– and 24–hr sample storage time, respectively. This was followed by the Tenax TA sorbent tubes (94.8% and 88.3%) for 24 and 120 hr, respectively; PET bags (71.7% and 47.2%), FEP bags (75.4% and 39.4%), commercial Tedlar bags (67.6% and 22.7%), in–house–made Tedlar bags (47.3% and 37.4%), foil bags (16.4% and 4.3%), and canisters (4.2% and 0.5%), for 0.5 and 24 hr, respectively. VFAs had higher recoveries than semivolatile organic compounds for all of the bags and canisters. New FEP bags and new foil bags had the lowest and the highest amounts of chemical impurities, respectively. New commercial Tedlar bags had measurable concentrations of N,N–dimethyl acetamide and phenol. Foil bags had measurable concentrations of acetic, propionic, butyric, valeric, and hexanoic acids.     

Compost impacts on dissolved organic carbon and available nitrogen and phosphorus in turfgrass soil

Compost application to turfgrass soils may increase dissolved organic C (DOC) levels which affects nutrient dynamics in soil. The objectives of this study were to investigate the influence of compost source and application rate on soil organic C (SOC), DOC, NO(3), and available P during 29 months after a one-time application to St. Augustinegrass [Stenotaphrum secundatum (Walt.) Kuntze] turf. Compost sources had variable composition, yet resulted in few differences in SOC, DOC, and NO(3) after applied to soil. Available NO(3) rapidly decreased after compost application and was unaffected by compost source and application rate. Available P increased after compost application and exhibited cyclical seasonal patterns related to DOC. Compost application decreased soil pH relative to unamended soil, but pH increased during the course of the study due to irrigation with sodic water. Increasing the compost application rate increased SOC by 3 months, and levels remained fairly stable to 29 months. In contrast, DOC continued to increase from 3 to 29 months after application, suggesting that compost mineralization and growth of St. Augustinegrass contributed to seasonal dynamics. Dissolved organic C was 75%, 78%, and 101% greater 29 months after application of 0, 80, and 160 Mg compostha(-1), respectively, than before application. Impacts of composts on soil properties indicated that most significant effects occurred within a few months of application. Seasonal variability of SOC, DOC, and available P was likely related to St. Augustinegrass growth stages as well as precipitation, as declines occurred after precipitation events.     

Adapting to climate change: an integrated biophysical and economic assessment for Mozambique

Mozambique, like many African countries, is already highly susceptible to climate variability and extreme weather events. Climate change threatens to heighten this vulnerability. In order to evaluate potential impacts and adaptation options for Mozambique, we develop an integrated modeling framework that translates atmospheric changes from general circulation model projections into biophysical outcomes via detailed hydrologic, crop, hydropower and infrastructure models. These sector models simulate a historical baseline and four extreme climate change scenarios. Sector results are then passed down to a dynamic computable general equilibrium model, which is used to estimate economy-wide impacts on national welfare, as well as the total cost of damages caused by climate change. Potential damages without changes in policy are significant; our discounted estimates range from US$ 2.3 to US $7.4 billion during 2003?C2050. Our analysis identifies improved road design and agricultural sector investments as key ??no-regret?? adaptation measures, alongside intensified efforts to develop a more flexible and resilient society. Our findings also support the need for cooperative river basin management and the regional coordination of adaptation strategies.     

Character in organizational research: past directions and future prospects

Character (ethos) refers to those interpenetrable habitual qualities within individuals, and applicable to organizations that both constrain and lead them to desire and pursue personal and societal good. In our Incubator article, we undertake two objectives. First, we provide our conceptualization of character; briefly specifying what character is and is not. Second, we introduce several promising directions for organizationally based research on character. Copyright © 2008 John Wiley & Sons, Ltd.     

Long-term resource demand : Models for projection

This paper argues that there has been insufficient analysis of long-term forecasting methods for resource demand at national level, compared with the attention devoted to supply factors. It suggests several important issues which need to be understood about the nature of demand projection and its pitfalls. Some significant and widely used resource demand models are summarized, all of which are particularly vulnerable to the uncertainty of macroeconomic modelling.     

METHOD TO IDENTIFY EFFECTWE RIPARIAN BUFFER WIDTHS FOR ATLANTIC SALMON HABITAT PROTECTION1

ABSTRACT: Successful restoration of declining anadromous species is dependent upon effective riparian buffer zone management. Natural resource managers, policy developers and local conservation groups require science‐based information concerning the width at which a given buffer will be effective for its stated purpose. This paper summarizes a method developed in 1999 to determine effective riparian buffer widths for Atlantic salmon habitat protection as part of the Atlantic Salmon Conservation Plan for Seven Maine Rivers. A major assumption of the method is that no two buffers are alike with respect to their effectiveness and that various buffer characteristics dictate the required width for a given level of effectiveness. The method uses a predictive model that generates suggested riparian buffer widths as a function of specific, measurable buffer characteristics (such as slope, soil characteristics, and plant community structure and density) that affect buffer function. The method utilizes a variable‐width, two‐zone approach and specifies land uses that are consistent with desired buffer function within the two zones.