TiO2 photocatalytic degradation of PCBs in soil-water systems containing fluoro surfactant

Titanium dioxide-mediated photodegradation of Polychlorinated biphenyls (PCBs) in soil/aqueous systems with added fluorinated surfactant was investigated. PCBs can bind tightly to organic matter in the soil, especially in aged, contaminated soil. Experiments showed an effective PCB photocatalytic degradation in mixed systems of soil/clay with anionic fluorinated surfactant FC-143 and TiO2. The FC-143 surfactant is stable in this photochemical process. PCB degradation rates in samples followed the order: spiked clay > spiked soil > Hudson River bank soil. The results suggest that anionic fluorinated surfactant may form semimicelles and/or admicelles on the surface of positively charged TiO2. The hydrophobic surface of TiO2 can provide a nonpolar phase that acts as a partioning medium for hydrophobic PCBs. Therefore, PCBs in soil can be released to the semimicelle and/or admicelle on the TiO2 surface and are effectively photodegraded in a dispersion containing anionic fluorinated surfactant. The combination of surfactant extraction and photooxidation forms the basis for a novel two-stage process for the removal and destruction of PCBs from soil.     

Risk assessment of particulate matter by considering time-activity-pattern and major microenvironments for preschool children living in Seoul,South Korea

Environmental Science and Pollution Research - Preschool children aged 3–6 years are vulnerable to exposed to particulate matter (“PM10” and “PM2.5”). It is required...     

Polychlorinated dibenzo-p-dioxins and dibenzofurans from food salt samples processed by heat treatment in Korea

Eight samples of processed food salt collected from five plants in Korea were analyzed for 2,3,7,8-substituted polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) using liquid-liquid extraction, clean-up procedures, and high resolution gas chromatography-high resolution mass spectrometry. The study included the analyses of two kinds of salt product sample: bamboo-salt and parched salt. The levels of toxic PCDD/Fs found in the salt product samples were extremely low: the results revealed TEQ levels ranging between the sub pg TEQ/g and sub fg TEQ/g. The differences in the TEQ values of toxic PCDD/F were observed between the salt product samples, which were treated with different frequency of baking using four different fuels (firewood, pine wood, pine resin, and indirect heating by gas) at temperatures from 300 to 2000 degrees C. In bamboo-salt samples, the concentrations and TEQ values of toxic PCDD/Fs ranged between 0.57-66 pg/g and 5.7x10(-5)-0.64 pg TEQ/g, respectively. PCDD/Fs levels in bamboo-salts baked by firewood were found to be higher than those baked by pinewood or pine resin. In parched salt samples, the concentrations and TEQ values of toxic PCDD/Fs ranged between 0.97-3.7 pg/g and 0.0097-0.017 pg TEQ/g, respectively. The data was discussed regarding the concentration and the distribution pattern of congeners.     

Sorption of polar and nonpolar organic contaminants by oil-contaminated soil

Sorption of nonpolar (phenanthrene and butylate) and polar (atrazine and diuron) organic chemicals to oil-contaminated soil was examined to investigate oil effects on sorption of organic chemicals and to derive oil–water distribution coefficients (K_oil). The resulting oil-contaminated soil–water distribution coefficients (K_d) for phenanthrene demonstrated sorption-enhancing effects at both lower and higher oil concentrations (C_oil) but sorption-reducing (competitive) effects at intermediate C_oil (approximately 1 g kg⁻¹). Rationalization of the different dominant effects was attempted in terms of the relative aliphatic carbon content which determines the accessibility of the aromatic cores to phenanthrene. Little or no competitive effect occurred for butylate because its sorption was dominated by partitioning. For atrazine and diuron, the changes in K_d at C_oil above approximately 1 g kg⁻¹ were negligible, indicating that the presently investigated oil has little or no effect on the two tested compounds even though the polarity of the oil is much less than soil organic matter (SOM). Therefore, specific interactions with the active groups (aromatic and polar domains) are dominantly responsible for the sorption of polar sorbates, and thus their sorption is controlled by available sorption sites. This study showed that the oil has the potential to be a dominant sorptive phase for nonpolar pollutants when compared to SOM, but hardly so for polar compounds. The results may aid in a better understanding of the role of the aliphatic and aromatic domains in sorption of nonpolar and polar organic pollutants.     

适用于我国农村地区的低温空气源热泵采暖技术

基于我国农村特点提出采用清洁能源利用技术——低温空气源热泵采暖方式替代农村传统的散煤燃烧取暖方式。低温空气源热泵采用较为成熟可靠的补气增焓技术。研究表明:在蒸发温度为-30 ℃、冷凝温度为45 ℃、补气比为0.6的模拟工况下运行,低温空气源热泵理论制热性能系数(COP)大于2.25,系统能效比(EER)高于1.90。在实际应用过程中,低温空气源热泵机组可解决不同场合下需依靠不同介质(热风或热水)采暖的问题,预计全面推广后,我国农村地区每年可减少二氧化碳、二氧化硫、氮氧化物和粉尘排放分别约3.86亿、0.115亿、0.057亿和1.05亿t,其可作为淘汰农村传统采暖方式的优先选择。     

炼油厂恶臭污染物的防治

论述了炼厂恶臭气体的防治方法，主要从密闭的生产装置、酸性水储罐及污水处理系统几个方面进行了分析并提出了目前为解决恶臭污染采取的方法。     

浅议保险对企业安全监督管理之作用

通过开展适合于保险和安全监管工作的风险评估体系的研究,充分发挥保险于安全监管的作用,从而为降低职工、企业乃至全社会的风险水平,为经济的可持续发展和社会稳定提供必要的保证。     

废弃铬盐厂土壤中铬的赋存特征及异位淋洗修复可行性研究

土壤理化性质、污染物的分布及赋存特征是土壤异位淋洗技术是否可行的关键依据。以西北某废弃铬盐厂铬污染场地土壤作为研究对象,测定了土壤基本理化参数及各粒径污染物的浓度,探究总铬和六价铬在不同粒径土壤中的分布特征,并通过铬的赋存形态分析确定清水作为淋洗剂,开展异位清水淋洗实验。结果表明：供试土壤粗颗粒物料（粒径分别为：>9.50 mm、2.00~9.50 mm、0.841~2.00 mm及0.25~0.841 mm）占土壤总质量的比例达到93.36%,总铬和六价铬污染物富集于土壤细颗粒（粒径-1,达到修复标准要求。     

2013年北京市臭氧时空分布及预报

根据2013年1-12月北京市O3小时浓度监测数据,探讨了北京市O3的时空分布特征,并建立了O3回归统计模型。结果显示:2013年北京市O3 8 h全年平均为84.75 μg/m3,O3超标日主要集中在5-9月份;O3日变化呈现单峰型分布,一般在15:00、16:00左右达到峰值,且存在明显的周末效应,空间分布上,中心城区O3浓度相对较低,生态植被优良的北部、西部山区站点浓度较高;建立的O3回归统计模型对北京市2013年O3 8 h临近预报的级别准确率在75%以上,能较好地反映O3浓度变化趋势。