Toxic by-products from the combustion of Kraft lignin

Lignin samples, sub-product in the Kraft process of cellulose from eucalyptus wood, were burnt in a laboratory scale furnace at different residence temperatures and with distinct fuel-rich atmospheres. The yields of CO, CO(2), eight light hydrocarbons (methane, ethylene, ethane, propylene, acetylene, butane, etc.) and 60 semi-volatile+volatile compounds (benzene, toluene, ethylbenzene, styrene, indene, naphthalene, dibenzofuran, phenanthrene, chrysene, etc.) were determined, with nominal reactor temperatures between 800 and 1100 degrees C and residence times of the volatiles evolved and formed between 4 and 7 s. The collection of the gases and volatiles evolved was carried out with a Tedlar bag and by XAD-4 resin respectively, comparing the data obtained in both cases. The emission factor (mg/kg) of the CO was between 2500 and 90000, and under the poor-oxygen atmosphere, the emission factors of many by-toxic products were greater than 100 mg/kg. A pyrolysis run was also performed, obtaining emission factors between 30 and 3000 mg/kg, facilitating its identification. The behaviour of different compounds in the combustion runs was discussed considering three groups in accordance with their stability vs. oxygen, and two groups vs. temperature.     

Atmospheric particulate matter and air quality in the Mediterranean: a review

This article synthesises the results obtained in several projects on atmospheric aerosol (particulate matter – PM) pollution developed during the last years in the Western Mediterranean. It focuses on particulate matter sources and the strategies for suitable monitoring in ambient air. The article has been structured in several sections that give response to the main questions that prompted these studies. After analysing the main PM features in the Mediterranean, a brief review of the main factors differentiating the particulate matter composition with respect to Central Europe is presented. Finally, the suitability of the different metrics or parameters for monitoring ambient air PM levels in different types of environments is discussed. Selected article from the 6th European Meeting on Environmental Chemistry, University of Belgrade, Serbia and Montenegro organized by Prof. Dr. Branimir Jovancicevic (www.research.plymouth.ac.uk/ace).     

Year-round reproduction in a seasonal sea: biological cycle of the introduced ascidian Styela plicata in the Western Mediterranean

The widely introduced ascidian Styela plicata is very common in the Western Mediterranean, an area that can act as a source for secondary introductions due to its high shipping activity. In order to understand the potential of this species to colonize new habitats, its reproductive features were assessed in the Western Mediterranean by means of monthly monitoring of two populations (Vilanova i la Geltrú 41°12′53″N, 1°44′11″E; Blanes 41°40′29″N, 2°47′56″E) from January 2009 to December 2010. The reproductive activity of this species was assessed through gonad histology and a gonad index. Population size-structure was measured monthly in order to study recruitment dynamics. No clear seasonal pattern was observed, and mature gametes and recruits were present all year long. Spawning was potentially continuous, although it seemed punctuated with pulses of gamete release, particularly in spring. A prolonged reproductive period is likely to confer a competitive advantage on S. plicata in temperate seas, where most species reproduce seasonally, and may promote recurrent introductions as larvae are available for settlement on transport vectors over much of the year.     

Fungal biofilters for toluene biofiltration: evaluation of the performance with four packing materials under different operating conditions

Packing materials play a key role in the performance of bioreactors for waste gas treatment and particularly in biofilter applications. In this work, the performance of four differently packed biofilters operated in parallel for the treatment of relatively high inlet concentration of toluene was studied. The reactors were compared for determining the suitability of coconut fiber, digested sludge compost from a waste water treatment plant, peat and pine leaves as packing materials for biofiltration of toluene. A deep characterisation of materials was carried out. Biological activity and packing capabilities related to toluene removal were determined throughout 240 days of operation under different conditions of nutrients addition and watering regime. Also, biofilters recovering after a short shutdown was investigated. Nutrient addition resulted in improved removal efficiencies (RE) and elimination capacities (EC) of biofilters reaching maximum ECs between 75 and 95 g m(-3)h(-1) of toluene. In the first 80 days, the pH decreased progressively within the reactors, causing a population change from bacteria to fungi, which were the predominant decontaminant microorganisms thereafter. All reactors were found to recover the RE rapidly after a 5 days shutdown and, in a maximum of 7 days, all reactors had been completely recuperated. These results point out that fungal biofilters are a suitable choice to treat high loads of toluene. In general, coconut fiber and compost biofilters exhibited a better performance in terms of elimination capacity and long-term stability.     

Resilience and collapse of artisanal fisheries: a system dynamics analysis of a shellfish fishery in the Gulf of California, Mexico

Analyzing different pathways by which social–ecological systems can loose resilience and enter trajectories of collapse constitutes an important aspect of our quest towards understanding resource sustainability. This paper’s goal was to better understand the effect of a particular class of disturbance—the accumulative effects of routine stressors—in the context of marine social–ecological systems. To that effect, we built a system dynamics model using empirically collected institutional and biological field data of an artisanal fishery in the Gulf of California, Mexico. Among our findings, we identified different scenarios under which even very small endogenous changes in the relationship between ecological and institutional variables can send a seemingly resilient system into a trajectory of collapse. We discuss why these types of disturbances are so difficult to prevent and be identified by the users of the resource, as well as potential strategies to address these challenges.     

不同年龄夜鹭卵中有机氯农药污染的生物指示

通过对太湖鼋头渚 2 0 0 0年采集的二龄、三龄和四龄夜鹭卵以及相应年龄组夜鹭的捕食物中有机氯残留的检测 ,发现捕食物中HCH和DDT的平均残留量随年龄增加而增加 .除γ HCH外 ,其它 15种有机氯农药在卵样中均有检出 ,残留水平最高的为p ,p′ DDE ,占有机氯农药残留总量的 85 %以上 .β HCH是六六六类中持留性最强的组分 ,其残留量仅次于p ,p′ DDE .研究发现 ,p ,p DDT和 β HCH检出率为 10 0 % ,而其它类型农药只有很低的检出率 ,这与我国有机氯农药使用的历史情况相吻合 .随着亲鸟年龄增加 ,卵中 β HCH残留量有所提高 ,p ,p′ DDE残留量似有先升后稍降的趋势 .统计结果表明 :各年龄组有机氯残留量差异不明显 ,因此在用夜鹭卵作有机氯污染的生物指示时可以不考虑年龄差异所带来的影响 .     

鼋头渚不同年龄夜鹭卵中多氯联苯污染状况及分布特征

通过对太湖鼋头渚2000年采集的2龄、3龄和4龄夜鹭所产卵中15种多氯联苯同系物残留状况的研究,发现所有样品中均检出多氯联苯,残留量最高的为PCB₁₁₈,PCB₈₇,PCB₁₀₁和PCB₁₅₃,占PCBs残留量的75%～85%.含5～6个氯原子的同系物在夜鹭卵中的PCBs残留量明显高于其它类型的同系物.同时,多氯联苯残留量随亲鸟年龄增加而明显增加.4龄卵样分别比3龄、2龄卵样中PCBs残留量高出47.5%和60.9%.统计处理结果表明:多氯联苯残留总量与亲鸟年龄呈正相关(p=0.05).PCBs总量与亲鸟年龄呈正相关(p=0.05).与欧美日等国家同类研究结果中PCB₁₅₃残留量最高的情况略有不同,本研究在夜鹭卵中发现残留量最高的是PCB₁₁₈,占PCBs残留总量的30%左右,PCB₁₅₃含量仅为PCBs残留总量的17%左右.     

A novel bioscrubber for the treatment of high loads of ammonia from polluted gas

Environmental Science and Pollution Research - This work presents a novel bioscrubber configuration for the treatment of high ammonia loads at short contact times. The biological reactor was...     

Ammonia emissions from the composting of different organic wastes. Dependency on process temperature

Ammonia emissions were quantified for the laboratory-scale composting of three typical organic wastes with medium nitrogen content: organic fraction of municipal solid wastes, raw sludge and anaerobically digested sludge; and the composting of two wastes with high nitrogen content: animal by-products from slaughterhouses and partially hydrolysed hair from the leather industry. All the wastes were mixed with the proper amount of bulking agent. Ammonia emitted in the composting of the five wastes investigated revealed a strong dependence on temperature, with a distinct pattern found in ammonia emissions for each waste in the thermophilic first stage of composting (exponential increase of ammonia emitted when increasing temperature) than that of the mesophilic final stage (linear increase of ammonia emissions when increasing temperature). As composting needs high temperatures to ensure the sanitisation of compost and ammonia emissions are one of the main environmental impacts associated to composting and responsible for obtaining compost with a low agronomical quality, it is proposed that sanitisation is conducted after the first stage in large-scale composting facilities by a proper temperature control. CAPSULE: Ammonia emission pattern and correlation with process temperature are presented for the composting process of different organic wastes.