火灾探测的原理和方法(下)

简述了火灾现象的物理特征、火灾探测的基本原理并对火灾探测算法的建立及发展作了介绍。对产生火灾误报警的原因进行了分析，指出要改善火灾探测的准确性，缺少的不是思路和技术，而是火灾科学基础研究的积累。     

我国水中余氯测定标准的对比分析

分析了国内水中余氯测定标准的现状,从标准适用范围、标准对象、方法原理、样品预处理、干扰物和方法的精密度等方面对现行标准进行了分析讨论,提出目前国内水中余氯测定标准存在现状复杂、技术内容重复、术语名称和定义不统一、样品预处理、保藏和运输规定与检测方法之间不协调、方法的质量指标不同等问题,并对今后余氯测定标准化工作提出建议,特别是针对标准对象名称混乱和技术内容重复等现象,对标准制/修订工作提出了及时复审或修订标准、对关键技术内容开展比对试验以探讨差异存在必要性等建议。     

黄河流域区域发展优势与经济带生成可能

基于进化经济学和进化经济地理学的理论,文章重点讨论了黄河流域的区域发展优势和建成黄河流域经济带的可能性。研究从黄河流域发展的历史出发,论证了黄河流域经济发展的区域地理学本性(nature)条件和现实可能性:第一,黄河流域经济发展的区域地理学本性条件是,该区域已经完成了农业经济建设,出现了遍在性的工业化和经济区人口聚集,特别是经过长期聚集,黄河流域已经形成了中国的人口密集带,形成了具有区域发展优势的中原城市群。第二,在分析黄河流域区域发展优势基础上,提出建成“大中原-黄河经济带”的可能性及其发展途径,即在生态保护的前提下,坚持地理环境的鲁棒性建设,坚持城市创新发展,坚持发展新型产业。第三,地区发展政策重点应该关注中原城市群的工业化-城市化发育和一体化产业链的形成,根据新经济地理学理论,提倡城市产业专业化方向,打破省界限制,发挥经济区的地缘结构优势,在空间上与环渤海经济带融合,完成黄河流域经济带高质量发展的战略构想。     

服装热湿舒适性能评价方法综述1

评价服装热湿舒适性能的方法有很多,包括主观和客观评价,物理、生理和心理方面的评价,以及各种具体的评价方法,但是一直没有对这些方法进行全面汇总研究.本文正是基于以上目的,对于服装热湿舒适性能研究中所用到的评价方法及其适用性逐一分析,最后对全面评价服装热湿舒适性能给出建议.     

流动注射在线预富集-火焰原子吸收法测定水样中Cr(Ⅵ)*

用二乙基硫代氨基磺酸钠（NaDDTC)作为螯合剂的流动注射在线配合C18固相萃取预富集联用火焰原子吸收测定体系,在线分离测定水体中的Cr(Ⅵ),分析试样速率为50个／h,对含Cr(Ⅵ)0.02mg／L和0.15mg/L的标准 溶液进行8次平行测定,其相对标准偏差分别为6.90%和2.18%,相对误差为2.11%-4.75%,方法检测限为4.92ug/L。富集时间为40s,与直接进样比较,灵敏度提高8倍。Cr（Ⅲ)的含量即使达到10mg/L也不影响测定。     

MEHP induces pyroptosis and autophagy alternation by cathepsin B activation in INS-1 cells

Environmental Science and Pollution Research - Mono-(2-ethylhexyl) phthalate (MEHP) is a primary metabolite of di-(2-ethyl hexyl) phthalate (DEHP) in the organism, which is a major component of...     

Volatile organic compounds concentration profiles and control strategy in container manufacturing industry: Case studies in China

Volatile organic compounds (VOCs), important precursors of ozone (O₃) and fine particulate matter (PM_2.5), are the key to curb the momentum of O₃ growth and further reducing PM_2.5 in China. Container manufacturing industry is one of the major VOC emitters, and more than 96% containers of the world are produced in China, with the annual usage of coatings of over 200,000 tons in recent years. This is the first research on the emission characteristics of VOCs in Chinese container manufacturing industry, including concentration and ozone formation potential (OFP) of each species. The result shows that the largest amounts of VOCs are emitted during the pretreatment process, followed by the paint mixing process and primer painting process, and finally other sprays process. The average VOC concentrations in the workshops, the exhausts before treatment and the exhausts after treatment are ranging from 82.67–797.46 , 170–1,812.65 , 66.20–349.63 mg/m³, respectively. Benzenes, alcohols and ethers are main species, which contribute more than 90% OFP together. Based on the emission characteristics of VOCs and the technical feasibility, it is recommended to set the emission limit in standard of benzene to 1.0 mg/m³, toluene to 10 mg/m³, xylene to 20 mg/m³, benzenes to 40 mg/m³, alcohols and ethers to 50 mg/m³, and VOCs to 100 mg/m³. The study reports the industry emission characteristics and discusses the standard limits, which is a powerful support to promote VOCs emission reduction, and to promote the coordinated control of PM_2.5 and O₃ pollution.     

Selective elimination of chromophoric and fluorescent dissolved organic matter in a full-scale municipal wastewater treatment plant

Effluent organic matter (EfOM) from municipal wastewater treatment plants potentially has a detrimental effect on both aquatic organisms and humans. This study evaluated the removal and transformation of chromophoric dissolved organic matter (CDOM) and fluorescent dissolved organic matter (FDOM) in a full-scale wastewater treatment plant under different seasons. The results showed that bio-treatment was found to be more efficient in removing bulk DOM (in terms of dissolved organic carbon, DOC) than CDOM and FDOM, which was contrary to the disinfection process. CDOM and FDOM were selectively removed at various stages during the treatment. Typically, the low molecular weight (MW) fractions of CDOM and protein-like FDOM were more efficiently removed during bio-treatment process, whereas the humic-like FDOM exhibited comparable decreases in both bio-treatment and disinfection processes. Overall, the performance of the WWTP was weak in terms of CDOM and FDOM removal, resulting in enrichment of CDOM and FDOM in effluent. Moreover, the total removal of the bulk DOM (P < 0.05) and the protein-like FDOM (P < 0.05) displayed a significant seasonal variation, with higher removal efficiencies in summer, whereas removal of CDOM and the humic-like FDOM showed little differences between summer and winter. In all, the results provide useful information for understanding the fate and transformation of DOM, illustrating that sub-fractions of DOM could be selectively removed depending on treatment processes and seasonality.     

Inhibitor resistance and in situ capability of nanoparticle based gene quantification

We have demonstrated the preliminary results of the in situ monitoring capability of an inhibitor resistant gene quantification assay using magnetic bead (MB) and quantum dot (QD) nanoparticles (hereafter "MB-QD assay") for the detection of E. coli O157:H7 in environmental samples. The selectivity of the MB-QD assay was demonstrated via the discrimination of the target bacteria in the presence of nonspecific microbial populations. The effect of temperature on the assay was examined to evaluate the necessity of elevated temperature incubation. The reagents (i.e., particle complex and particle-DNA conjugate) were also shown to have a stability of at least 10 days without refrigeration, therefore enabling prior preparation and the subsequent storage of these reagents. In addition, it was found that the MB-QD assay was resistant to the presence of naturally occurring inhibitors (i.e., humic acids, Ca(2+)) and residual reagents from DNA extraction (i.e., surfactant, ethanol). Overall the results indicated that the MB-QD assay is potentially suitable for further development as an in situ bacteria monitoring method for working with inhibitor laden samples without requiring additional purification steps and elevated temperature processes.     

基于主成分分析法研究内蒙古环境质量的统计分析

生态环境问题一直以来制约着西部地区的经济发展,内蒙古作为以资源型开发为主要工业结构的自治区在这方面表现尤为突出。为了使内蒙古自治区借助实施西部大开发战略和开展生态环境建设的机会推进环境保护工作的进程,从环境污染和生态破坏角度运用主成分分析法评价内蒙古自治区2005年到2009年间环境质量。通过综合得分分析得出内蒙古环境质量逐年好转,而且环境质量整体优化速率逐年加快,通过主成分分析得到大气污染和工业污染是在不同领域影响自治区环境质量的主导因素,主要归因于内蒙古自治区工业结构以资源能源型为主、沙尘天气频繁出现以及追求经济快速增长所致的环境问题。