Partitioning and removal of dioxin-like congeners in flue gases treated with activated carbon adsorption

Activated carbon adsorption is commonly used to control dioxin-like congener (PCDD/Fs and PCBs) emissions. Partitioning of PCDD/Fs and PCBs between vapor and solid phases and their removal efficiencies achieved with existing air pollution control devices (APCDs) at a large-scale municipal waste incinerator (MWI) and an industrial waste incinerator (IWI) are evaluated via intensive stack sampling and analysis. Those two facilities investigated are equipped with activated carbon injection (ACI) with bag filter (BF) and fixed activated carbon bed (FACB) as major PCDD/F control devices, respectively. Average PCDD/F and PCB concentrations of stack gas with ACI+BF as APCDs are 0.031 and 0.006ng-TEQ/Nm(3), and that achieved with FACB are 1.74 and 0.19ng-TEQ/Nm(3) in MWI and IWI, respectively. The results show that FACB could reduce vapor-phase PCDD/Fs and PCBs concentrations in flue gas, while the ACI+BF can effectively adsorb the vapor-phase dioxin-like congener and collect the solid-phase PCDD/Fs and PCBs in the meantime. Additionally, the results of the pilot-scale adsorption system (PAS) experimentation indicate that each gram activated carbon adsorbs 105-115ng-PCDD/Fs and each surface area (m(2)) of activated carbon adsorbs 10-25ng-PCDD/Fs. Based on the results of PAS experimentation, this study confirms that the surface area of mesopore+macropore (20-200A) of the activated carbon is a critical factor affecting PCDD/F adsorption capacity.     

Removal of cyanobacterial blooms in Taihu Lake using local soils. I. Equilibrium and kinetic screening on the flocculation of Microcystis aeruginosa using commercially available clays and minerals

Algal removal abilities of 26 clays/minerals were classified into three categories according to the 8-h equilibrium removal efficiency (Q8h) and removal rate at a clay loading of 0.7 g/L. Type I clays (sepiolite, talc, ferric oxide, and kaolinite) had a Q8h > 90%, a t50 (time needed to remove 50% of the algae) < 15 min, and a t80 < 2.5 h. Type II clays (6 clays) had a Q8h 50-90%, a t50 < 2.5 h, and a t80 > 2.5 h. Type III clays (14 clays) with Q8h < 50%, t50 > 8 h and t80 > 14 h had no practical value in removal of algal blooms. When the clay loading was reduced to 0.2 g/L, Q8h for all the 25 materials decreased to below 60%, except for sepiolite whose Q8h remained about 97%. The high efficiency for sepiolite to flocculate M. aeruginosa cells in freshwaters was due to the mechanism of netting and bridging effect.     

英国联合利华公司的兼并策略研究

当前,国内外市场正掀起公司整合、兼并的浪潮,针对英国联合利华公司的战略动机和兼并对公司的潜在影响。运用竞争态势分析（SWOT）方法．从六个方面分析了联合利华公司两个成功案例。结合管理模式和国家文化的差异。关注社会文化与“战略性文化适应”。对联合利华最近5年来的成长战略和Best Foods公司战略核心要素进行了分析。评价了联合利华的战略发展和将来的战略发展方向。指出联合利华品牌减少战略体现出核心竞争,加强个人护理产品的生产．保持持续发展和竞争优势．以期达到相当的经济规模．是值得借鉴的成功经验。     

面向大坝混凝土浇筑的缆机安全防撞系统设计及应用

在大坝混凝土浇筑过程中,防止缆机碰撞事故的发生对确保施工安全性和连续性具有重要意义.针对大坝混凝土浇筑过程的缆机防撞监测的需求,基于GNSS与GIS集成模式,采用C/S结构体系设计了一个四层逻辑架构的缆机安全防撞系统.重点讨论了系统的数据库结构设计和功能模块设计,阐述了利用GIS组件开发方法在Visual Studio 2008平台上开发出相应原型系统的过程,并在国电大渡河大岗山水电站大坝混凝土浇筑过程进行应用.结果表明,该系统能够对缆机与其他设备之间的碰撞事故进行及时预警.     

水分散封闭异氰酸酯研究进展

封闭异氰酸酯由于亲水性较差难以分散于水中,通过亲水改性可以使其具有优异的水分散性,但是较高的解封温度及成本使其难以投入实际应用.对水分散封闭异氰酸酯的研究进展进行综述,并对其应用进行了说明,从实际出发对水分散封闭异氰酸酯的发展趋势做出展望.     

建筑企业员工职业病危害认知影响因素的调查分析

随着建筑行业的持续快速发展,建筑企业作业场所中的职业病危害呈现出高发性、复杂性和持续性等特点.通过针对建筑企业员工的实际状况设计调查问卷获取第一手资料,并运用SPSS17.0统计软件建立相关分析、回归分析等模型进行数据分析,可以得知建筑企业作业场所员工遭受职业病危害的可能性与对安全知识的了解程度、从业时间、性别及文化背景这四个因素的线性相关性.通过对建筑企业作业人员职业病危害的调查与分析,辨识出影响职业病危害的人为因素,提出相关的建议措施以改善建筑企业作业场所职业病危害严重的局面,提高建筑企业员工自我保护意识,增加其职业病危害防护知识,减少职业病危害事故的发生.     

Glyphosate application increased catabolic activity of gram-negative bacteria but impaired soil fungal community

Environmental Science and Pollution Research - Glyphosate is a non-selective organophosphate herbicide that is widely used in agriculture, but its effects on soil microbial communities are highly...     

未按规定导向车道行驶行为干预方法研究

为保障信号交叉口的正常交通秩序,充分遏制机动车未按规定导向车道行驶行为,亟需探究该行为的影响因素及干预方法。以北京市内4个信号交叉口处共35 h的1 666条监控视频数据为基础,对未按规定导向车道行驶行为进行定义并将其分为9类,分别对频率较高的5类未按规定导向车道行驶行为构建二元Logit模型,以确定其关键影响因素,并据此提出干预方法。结果表明,排队车辆数、大车比例、时段、车流量、照明条件等因素会不同程度地影响5类未按规定导向车道行驶行为的发生概率,其中排队车辆数及时间因素影响最为显著。在此基础上,从交通工程设施及驾驶人安全意识角度,提出优化交叉口渠化设计及信号配时、采用智能标线、强化监管力度及完善交通管控设施、加强驾驶人安全教育4种未按规定导向车道行驶行为干预方法。