Differences in nitrous oxide fluxes from red soil under different land uses in mid-subtropical China

Red soil may play an important role in nitrous oxide (N₂O) emissions due to its recent land use change pattern. To predict the land use change effect on N₂O emissions, we examined the relationship between soil N₂O flux and environmental determinants in four different types of land uses in subtropical red soil. During two years of study (January 2005-January 2007), biweekly N₂O fluxes were measured from 09:00 to 11:00 a.m. using static closed chamber method. Objectives were to estimate the seasonal and annual N₂O flux differences from land use change and, reveal the controlling factors of soil N₂O emission by studying the relationship of dissolved organic carbon (DOC), microbial biomass carbon (MBC), water filled pore space (WFPS) and soil temperature with soil N₂O flux. Nitrous oxide fluxes were significantly higher in hot-humid season than in the cool-dry season. Significant differences in soil N₂O fluxes were observed among four land uses; 2.9, 1.9 and 1.7 times increased N₂O emissions were observed after conventional land use conversion from woodland to paddy, orchard and upland, respectively. The mean annual budgets of N₂O emission were 0.71-2.21 kg N₂O-N ha⁻¹ year⁻¹ from four land use types. The differences were partly attributed to increased fertilizer use in agriculture land uses. In all land uses, N₂O fluxes were positively related to soil temperature and DOC accounting for 22-48% and 30-46% of the seasonal N₂O flux variability, respectively. Nitrous oxide fluxes did significantly correlate with WFPS in orchard and upland only. Nitrous oxide fluxes responded positively to MBC in all land use types except orchard which had the lowest WFPS. We conclude that (1) land use conversion from woodland to agriculture land uses leads to increased soil N₂O fluxes, partly due increased fertilizer use, and (2) irrespective of land use, soil N₂O fluxes are under environmental controls, the main variables being soil temperature and DOC, both of which control the supply of nitrification and denitrification substrates.     

内配燃料垃圾焚烧飞灰烧结无害化处理实验研究

研究了一种垃圾焚烧飞灰烧结无害化处理的工艺,该工艺是将飞灰与不同比例煤粉混合并添加助熔剂进行造粒烧结。通过对试样进行热流和热重测量,分析了飞灰试样在加热过程中热重变化的规律,并利用XRD、扫描电镜、氮吸附分析仪等仪器分析手段对烧结试样的物相、微观形态和孔隙特性等物理化学性质进行了研究。最后采用电感耦合等离子体发射光谱仪对烧结试样重金属浸出性进行了分析。实验结果为飞灰烧结炉的设计和内配燃料烧结工艺运行参数的制定提供了依据。     

原子荧光冷汞法测定地表水中的汞

建立原子荧光冷汞法测定地表水中的汞,通过实验及查阅相关资料对部分实验条件,如仪器的负高压和灯电流、屏蔽气和载气的流量、硼氢化钾和氢氧化钠的浓度、酸及其浓度等进行了优化。在最佳实验条件下汞的检出限为0.019μg/L,相关系数r>0.999,加标回收率为93.7%～106.4%,相对标准偏差0.79%～3.59%。实验结果表明:原子荧光冷汞法测定地表水中的汞具有简便、快速、清洁、高效、安全等优点,灵敏度高、精确度和准确度好、检出限低,是测定地表水中汞含量的有效方法。     

水体中总氮检测的方法研究

使用碱性过硫酸钾氧化紫外分光光度法(GB 11894—1989)测定水中的总氮时,在严格按该方法分析步骤操作的情况下,依然会出现空白值偏高、检测结果不准确等问题。本文对水中总氮检测过程中的影响因素进行了总结、分析,对需要重点注意的环节进行了探讨,找出了问题的原因并提出了解决方法。     

液液萃取-高效液相色谱法测定水中阿特拉津质量控制指标体系研究

文章采用液液萃取-高效液相色谱法,通过统计全国多家实验室的测定数据,对水中阿特拉津测试的精密度和准确度两大类共5个质控指标及其评价标准进行了研究,提出在概率P和γ均为0.90时,平行样、空白加标回收率平行样和样品加标回收率平行样最大相对偏差应分别控制在7.5%、10.5%和9.7%;空白加标浓度为0.1～20μg/L时,回收率应控制在59%～118%;样品测定浓度为未检出、加标浓度在0.2～20μg/L时,实际样品加标回收率应控制在73%～106%。     

贵州镇远提钒尾渣固体废弃物二次资源利用研究

为了开发无尾矿、少尾矿提钒工艺,对贵州镇远江古钒矿实验室扩大试验流程产生的尾矿进行资源化利用研究,尾渣物质组成研究表明:提钒尾渣的主要化学成分为二氧化硅,主要矿物为石英,尾渣放射性检测结果高于建筑物主体墙材中放射性指标的要求,不能直接应用于建筑主体材料.经用尾渣烧成水泥试验结果表明:尾渣烧成的水泥熟料基本化学成分、物理性能测试结果符合GB/T 21372-2008硅酸盐水泥熟料要求.     

新型TCAS吸附树脂对水中Cd2+的吸附去除研究

通过静态吸附试验,研究一种由超分子受体化合物磺化硫杂杯芳烃（TCAS）与树脂结合的产物——新型TCAS吸附树脂对重金属Cd²⁺的吸附去除性能,并初步探讨了吸附机理。试验研究结果表明,TCAS吸附树脂对Cd²⁺的饱和吸附量为14.45 mg/g。当温度为20℃,0.5 g TCAS吸附树脂对10 mL浓度为5 mg/L的Cd²⁺溶液吸附60 min时, Cd²⁺的去除率可达到99%以上。pH值是影响TCAS吸附树脂吸附效果的重要因素,在pH=5～9时,Cd²⁺的去除率随着pH值的升高而增大。在试验范围内,TCAS吸附树脂对Cd²⁺吸附符合Freundlich方程。吸附在TCAS吸附树脂上的Cd²⁺可洗脱回收,TCAS吸附树脂也可再生利用。 TCAS吸附树脂对重金属Cd²⁺的吸附机理主要归因于TCAS对Cd²⁺的络合作用。     

碱激发胶凝材料及其固化Pb~(2+)的试验研究

对碱激胶凝材料(碱-偏高岭土、碱-矿渣和碱-粉煤灰)与水-水泥体系固化Pb2+进行了试验研究,其中水-水泥体系为对比样.结果表明:对于相同稠度的碱激发胶凝材料,即使Pb2+含量达到2.4%,除了碱-粉煤灰的抗压强度略低外,其他都达到30 MPa以上,满足填埋或做建筑基材的使用要求;与水泥相比,碱激发胶凝材料能显著降低重金属离子(Pb2+)浸出浓度,其规律性与其NH4+交换容量大小的规律性一致,与其固化体的抗压强度的大小没有相关性.     

Incorporating layer- and local-scale heterogeneities in numerical simulation of unsaturated flow and tracer transport

This study characterizes layer- and local-scale heterogeneities in hydraulic parameters (i.e., matrix permeability and porosity) and investigates the relative effect of layer- and local-scale heterogeneities on the uncertainty assessment of unsaturated flow and tracer transport in the unsaturated zone of Yucca Mountain, USA. The layer-scale heterogeneity is specific to hydrogeologic layers with layerwise properties, while the local-scale heterogeneity refers to the spatial variation of hydraulic properties within a layer. A Monte Carlo method is used to estimate mean, variance, and 5th, and 95th percentiles for the quantities of interest (e.g., matrix saturation and normalized cumulative mass arrival). Model simulations of unsaturated flow are evaluated by comparing the simulated and observed matrix saturations. Local-scale heterogeneity is examined by comparing the results of this study with those of the previous study that only considers layer-scale heterogeneity. We find that local-scale heterogeneity significantly increases predictive uncertainty in the percolation fluxes and tracer plumes, whereas the mean predictions are only slightly affected by the local-scale heterogeneity. The mean travel time of the conservative and reactive tracers to the water table in the early stage increases significantly due to the local-scale heterogeneity, while the influence of local-scale heterogeneity on travel time gradually decreases over time. Layer-scale heterogeneity is more important than local-scale heterogeneity for simulating overall tracer travel time, suggesting that it would be more cost-effective to reduce the layer-scale parameter uncertainty in order to reduce predictive uncertainty in tracer transport.     

Endosulfan in China 1—gridded usage inventories

Background, aim, and scope  Endosulfan, an organochlorine pesticide (OCP), is genotoxic in mammalian cells and generally considered to be toxic and classified by the World Health Organization and the US Environmental Protection Agency as priority pollutants and a nominator for inclusion in a future iteration of the persistent organic pollutants treaty. Endosulfan is a currently used pesticide and still being used worldwide. The general trend of total global endosulfan use has increased continuously since the first year when this pesticide was applied. It is critical to create national endosulfan usage/emission inventories for China to carry out source–receptor relation analysis, risk assessment, and other research related to endosulfan in this country. Chinese inventories have been published for some OCPs, such as technical HCH and lindane, DDT, and chlordane; for endosulfan, however, there has not been any usage inventory available on any scales (national or provincial), although endosulfan has been widely used since 1994 in this country. This is the first part of the work. The goal of this paper is to quantify the historical production and usage of endosulfan in China and to compile gridded historical usage inventories of endosulfan for this country. Based on these usage inventories, emission and residue inventories will be created, which is the goal of the second part of the work. Materials and methods  Due to the lack of national production and usage information of endosulfan in China, a method to estimate the use of endosulfan was developed. First, information of crops on which endosulfan is applied and average endosulfan use and annual application frequencies of endosulfan on these crops were collected. Secondly, usage of endosulfan on each crop was estimated using the national cropland area for each province from Chinese government reports. Finally, with the help of GIS (geographic information system), the usage data of this insecticide was allocated to a grid system, with a 1/4° longitude by 1/6° latitude resolution, with a size for each grid cell of approximately 25 km by 25 km. Results and discussion  The use of endosulfan in agriculture in China started on cotton in 1994, and on wheat, tea, tobacco, apples, and other fruits in 1998. Endosulfan usage on cotton, wheat, tea, tobacco, and apples in China has been estimated to be approximately 25,700 t between 1994 and 2004. The province with the highest usage of endosulfan is Henan Province, with a total usage reaching 4,000 t, followed by the uses in Xinjiang Autonomous Region (3,200 t), Shandong Province (3,000 t), Hebei Province (2,100 t), and Anhui Province (1,900 t). Gridded usage inventories of endosulfan at a 1/4° longitude by 1/6° latitude resolution have been created, which indicate that the intensive endosulfan use was in the south of Hebei Province, west of Shandong Province, east of Henan Province, north of Anhui Province, east of Jiangsu Province, and some areas in Yunnan Province and Xinjiang Autonomous Region. General agreement has been found between the usage data from our estimation and the small amount of usage data published in China. Conclusions  This is the first national gridded endosulfan usage inventory produced for China. The annual applications of endosulfan from 1994 to 2004 in China were estimated based on the total areas of major crops, on which endosulfan was applied, and spatial distribution of the application was generated at provincial and prefecture levels. With the help of GIS, endosulfan usage based on prefecture was transferred to a 1/4° longitude by 1/6° latitude gridding system. The satisfaction of the inventories was supported by the consistence between the estimation of the annual usage and the reported annual production of endosulfan. Recommendations and perspectives  This gridded endosulfan usage inventory created in this study will be improved upon availability of new information of endosulfan. The usage inventories can be used to create gridded emission and residue inventories for this insecticide. It is believed that this work will pave the way for further endosulfan studies in China and beyond.