Enhanced struvite recovery from wastewater using a novel cone-inserted fluidized bed reactor

The feasibility of struvite recovery at low （12.5 mg/L） and high （120 mg[L） phosphorus concentrations was studied by constructing a novel fluidized bed reactor with cones （FBRwc） and without cones （FBRwoc）. The crystallization process was continuously operated for 133 days under different hydraulic retention times （HRT = 1-10 hr）, pH （7.5-10）, and molar ratios of Mg/P （0.75-1.75）, N/P （1-10） and Ca/Mg （0-2）. The optimum operating conditions of HRT, pH, Mg/P and N/P molar ratios were found to be 2 hr, 9, 1.25, and 7.5, respectively. Under these optimum conditions, the phosphorus precipitation efficiencies of FBRwc were 93% for low and 98% for high phosphorus influent; however, the efficiencies were 78% and 81% for FBRwoc, respectively. Due to crystal losses at each junction （17%-31%）, the crystal recovery efficiency of FBRwoc was relatively low （47%-65%） for both influent concentrations. However, the losses were minimal in FBRwc, which showed 75% and 92% crystal recovery for low and high phosphorus concentrations, respectively. At low calcium concentration, crystal chemical analysis showed the product to be pure struvite （〉 99%）. The scanning electron microscope and X-ray diffraction results further confirmed that the crystal recovered from FBRwc contained pure struvite, which could be considered a high quality fertilizer. Except HRT, all parameters （pH, Mg/P, N/P and Ca/Mg） were found to be influencing factors for FBRwc performance. Overall, inserting cones in each part of the reactor played a significant role in enhancing struvite recovery from a wide range of phosphorus-containing wastewater.     

树脂基纳米零价铁复合材料的制备及其去除重金属铅Pb(Ⅱ)的性能研究

凭借着优越的还原活性,纳米零价铁在环境污染治理和修复领域应用广泛。通过将纳米零价铁(n ZVI)颗粒负载到大孔阴离子和阳离子交换树脂上,成功制备出2种树脂基纳米零价铁复合材料。研究了2种复合材料及其载体对水溶液中Pb(Ⅱ)的去除性能,考察了不同载体功能基团对复合材料去除Pb(Ⅱ)性能的影响。结果表明:以大孔阴离子交换树脂为载体的D001-Fe0复合材料因具有离子交换和化学还原双重作用,对Pb(Ⅱ)的去除效率高、速率快。     

多哈气候会议结果分析

本文总结和分析了多哈气候会议的谈判热点和成果,特别介绍涵盖2013至2020年的《京都议定书》第二承诺期的要点;展望了计划于2015年达成新的有法律效力的全面的国际气候协议。     

利川市生活垃圾卫生填埋场场址的比选

选址是卫生填埋场建设和运行的关键。以利川市实际情况为前提和依据，筐选出7个预选场址，经实地踏勘和从填坦容量、运输距离、搬迁户数量等方面分析，遴选出其中3个；分别从工程学、环境学、经济学、社会与法律等方面中如交通状况、服务年限、占地面积、基岩类型、渗透系数、地下水位、覆盖土来源等13项具体条件上对3个备选场址进行了详细的分析比较，确定杨柳村大天井为最终选定场址。利川垃圾填埋场的选址工作也可以为同类型的城市或地区提供参考和借鉴。     

The effects of autophagy on vascular endothelial cells induced by airborne PM2.5

The purpose of this study was to examine the direct toxicity of PM2.5 collected from Beijing on human umbilical vein endothelial cells(HUVEC). A Cell Counting Kit 8(CCK8) assay demonstrated that PM2.5 exposure decreased the proliferation of HUVECs in a dosedependent manner. We also found that PM2.5 exposure induced autophagy in HUVECs, as evidenced by:(1) an increased number of double-membrane vesicles;(2) enhanced conversion and punctuation of the microtubule-associated protein light chain 3(LC3); and(3) decreased levels of the selective autophagy substrate p62 in a time-dependent manner.Furthermore, promoting autophagy in PM2.5-exposed HUVECs with rapamycin increased the cell survival rate, whereas inhibiting autophagy via 3-methyladenine significantly decreased cell survival. These results demonstrate that PM2.5 exposure can induce cytotoxicity and autophagy in HUVECs and that autophagy play a protective role against PM2.5-induced cytotoxicity. The findings of the present study imply a direct toxic effect of PM2.5 on HUVECs and provide novel insight into the mechanism of cardiovascular diseases caused by PM2.5 exposure.     

山仔水库富营养化与水华爆发的水文因素分析

文章通过水质主要指标的时空变化及其与水库流量、水位、水滞留时间等关系,研究水动力条件对山仔水库富营养化的影响。研究表明,由于山仔水库蓄水时清库不彻底,总氮、总磷浓度较高,从1997年开始呈现下降趋势,2001年后又有所回升;水库水滞留时间大于2周的年份,相对年均水位低,水库水华爆发的几率大;水库的进口、支流入口的总磷、COD、藻类数量和叶绿素a相对较高;山仔水库与下游塘坂水库因其水库形态、库容、水力交换能力的差异,藻类数量和叶绿素a含量也存在明显的差异,说明了山仔水库水华的发生与水文因素关系密切。     

包头市环境保护能力建设存在问题及对策

对照环境保护五大能力标准化建设要求,分析包头市环境保护自身能力建设现状,目前主要存在的问题是机构不健全、编制不足、缺乏人才、设备短缺且落后、资金匮乏、信息化滞后,县级环保局尤为突出。文章从机构建设与人才培养、监测能力、信息公告制度,宣教能力、信息网络建设等方面提出了包头市环境保护能力建设的对策建议,为环保事业的发展提供决策参考和技术支持。     

表面活性剂溶液中多氯联苯溶解的特性

对表面活性剂溶液中多氯联苯的溶解特性进行了研究.发现非离子型表面活性剂对多氯联苯增溶效果优于阴离子型表面活性剂;在浓度大于临界胶束浓度(CMC)范畴,不但表面活性剂的增溶效果远较其浓度低于CMC时为佳,而且表面活性剂浓度与多氯联苯的溶解度成正比地线性相关,此结果说明,表面活性剂主要通过形成胶束来增加多氯联苯的溶解度.多氯联苯在非离子型表面活性剂胶束溶液中与在正己烷中的紫外-可见光谱相似,进一步说明胶束内的多氯联苯分子主要分布于类似正己烷的疏水胶核区域.在十二烷基醇聚氧乙烯(10)醚溶液中,所试多氯联苯的辛醇-水分配系数(K_ow)与其胶束-水分配系数(K_m)存在很好的线性相关关系.     

流化床污泥干燥器床料的颗粒度对流化情况的影响

以上海白龙港污水处理厂流化床污泥干燥系统为研究对象,针对流化床污泥干燥器流化情况的好坏分析,在确定其它变量（流化风量、给料分配器转速、料层压差、运行负荷等）不变的情况下,对床料颗粒度的工艺参数进行研究实验,总结颗粒度的工艺参数对流化情况的运行变化规律,从而提高了流化床污泥干燥系统的稳定性、连续性和高效性。     

花卉废物和牛粪联合堆肥中的氮迁移

以花卉废物和牛粪为原料,进行了温度反馈的通气量控制联合堆肥中的氮迁移中试研究.采用自制的静态好氧床进行一次发酵,过程控制采用温度反馈通气量控制方法,发酵周期20d;采用周期性翻堆进行物料二次腐熟,腐熟周期40d.研究了堆肥过程中总氮、有机氮、无机氮、氨氮、硝氮等氮素形态转化随时间的变化特征及温度反馈的通气量控制对氮迁移的影响.结果表明:堆肥初期的氨化作用和反硝化作用显著,氮素总量损失累计达41.98%,其中主要是有机氮的损失,99.95%的氮损失发生在一次发酵阶段;氮素损失主要是在pH和温度较高条件下的氨气大量挥发造成的.对通风进行有效控制、提高物料C/N及添加酸性物质有望减少N损失.对于C/N较低,硝态氮含量较高的物料堆肥,NH₄⁺-N≤0.04%、NH₄/NO₃≤0.16不能作为腐熟度指标.