Microplastic pollution in freshwater systems in Southeast Asia: contamination levels,sources, and ecological impacts

Environmental Science and Pollution Research - Plastics are synthetic polymers known for their outstanding durability and versatility, and have replaced traditional materials in many applications....     

Uptake and distributions of polycyclic aromatic hydrocarbons in cultivated plants around an E-waste disposal site in Southern China

Environmental Science and Pollution Research - Polycyclic aromatic hydrocarbons (PAHs) in air, soil, and cultivated plants at e-waste disposal sites in Taizhou, Zhejiang Province, were determined...     

Analysis of China’s carbon emission driving factors based on the perspective of eight major economic regions

Environmental Science and Pollution Research - Low-carbon transition has gradually become the focus of research on environmental issues. This paper takes China’s eight major economic regions...     

Light absorption enhancement of particulate matters and their source apportionment over the Asian continental outflow site and South Yellow Sea

Environmental Science and Pollution Research - Light absorption enhancement of black carbon due to the aerosol mixing states is an important parameterization for climate modeling, while emission...     

河流CO2与CH4排放研究进展

河流作为连接海-陆两大碳库的主要通道,其水-气界面二氧化碳(CO_2)与甲烷(CH_4)排放构成全球碳循环的重要环节,对全球气候变暖的贡献不容小觑.明确河流水体CO_2与CH_4产排过程、时空特征以及控制因素是认识河流生态学功能以及其对变化环境响应的重要内容.基于当前河流CO_2与CH_4排放研究进展,构建河流碳排放动力学概念框架(内源代谢、陆源输入),并从全球尺度、区域尺度、流域尺度综述了河流碳排放时空变异性特征以及存在的研究不足.在理解碳排放动力学概念框架和时空变异特征的基础上,构建了河流CO_2与CH_4动力学控制因子分层框架(内部因子:有机质、温度、营养盐;外部因子:水文、地貌、人类活动),深入探讨了河流碳排放的关键影响因素.最后,根据当前研究中存在的不足,提出河流碳排放应将纳入区域陆地碳平衡过程,今后研究重点应包括流域尺度上河流CO_2与CH_4内源产生与陆源输入相对贡献的量化研究、不同界面CO_2与CH_4产生与排放过程研究、高时空分辨率的监测数据的补充以及变化环境与人类活动干扰下河流碳排放的响应过程等,为理解河流生态学过程及生态系统功能提供基础,同时为我国进一步深入开展相关研究提供借鉴.     

基于大气被动式采样的人体头发中类二(口恶)英多氯联苯暴露的途径

本研究通过分析采集自云南省开远市的13个树皮混合样品和13个相应的头发混合样品中DL-PCBs的水平、同族体分布及相关性,研究了当地人群对DL-PCBs的主要暴露途径.结果表明,云南开远树皮和头发样品中DL-PCBs的含量分别为4.0~88.9 pg·g^-1和4.1~19.3 pg·g^-1,其在当地环境和人体中的污染程度均较轻.树皮和头发样品中主要的DL-PCB同族体均是PCB-118,分别占总含量的48%和61%.树皮样品中DL-PCBs的各同族体具有相同的源,其主要的来源可能是大气的长距离输移.云南开远市居民头发中的PCBs可能来源于内部暴露和外部暴露的综合作用,其中外部暴露对低氯代PCBs的贡献要高于高氯代PCBs.     

Performance and microbial community of a membrane bioreactor system——Treating wastewater from ethanol fermentation of food waste

In this study, a lab-scale biological anaerobic/anaerobic/anoxic/membrane bioreactor(A_-~3MBR) was designed to treat wastewater from the ethanol fermentation of food waste,a promising way for the disposal of food waste and reclamation of resources. The 454 pyrosequencing technique was used to investigate the composition of the microbial community in the treatment system. The system yielded a stable effluent concentration of chemical oxygen demand(202 ± 23 mg/L), total nitrogen(62.1 ± 7.1 mg/L), ammonia(0.3 ±0.13 mg/L) and total phosphorus(8.3 ± 0.9 mg/L), and the reactors played different roles in specific pollutant removal. The exploration of the microbial community in the system revealed that:(1) the microbial diversity of anaerobic reactors A_1 and A_2, in which organic pollutants were massively degraded, was much higher than that in anoxic A_3 and aerobic MBR;(2) although the community composition in each reactor was quite different, bacteria assigned to the classes Clostridia, Bacteroidia, and Synergistia were important and common microorganisms for organic pollutant degradation in the anaerobic units, and bacteria from Alphaproteobacteria and Betaproteobacteria were the dominant microbial population in A_3 and MBR;(3) the taxon identification indicated that Arcobacter in the anaerobic reactors and Thauera in the anoxic reactor were two representative genera in the biological process. Our results proved that the biological A_-~3MBR process is an alternative technique for treating wastewater from food waste.     

Simultaneous removal of Cu(II) and Cr(VI) by Mg–Al–Cl layered double hydroxide and mechanism insight

Mg–Al–Cl layered double hydroxide (Cl-LDH) was prepared to simultaneously remove Cu(II) and Cr(VI) from aqueous solution. The coexisting Cu(II) (20 mg/L) and Cr(VI) (40 mg/L) were completely removed within 30 min by Cl-LDH in a dosage of 2.0 g/L; the removal rate of Cu(II) was accelerated in the presence of Cr(VI). Moreover, compared with the adsorption of single Cu(II) or Cr(VI), the adsorption capacities of Cl-LDH for Cu(II) and Cr(VI) can be improved by 81.05% and 49.56%, respectively, in the case of coexisting Cu(II) (200 mg/L) and Cr(VI) (400 mg/L). The affecting factors (such as solution initial pH, adsorbent dosage, and contact time) have been systematically investigated. Besides, the changes of pH values and the concentrations of Mg²⁺ and Al³⁺ in relevant solutions were monitored. To get the underlying mechanism, the Cl-LDH samples before and after adsorption were thoroughly characterized by X-ray powder diffraction, transmission electron microscopy, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy. On the basis of these analyses, a possible mechanism was proposed. The coadsorption process involves anion exchange of Cr(VI) with Cl⁻ in Cl-LDH interlayer, isomorphic substitution of Mg²⁺ with Cu²⁺, formation of Cu₂Cl(OH)₃ precipitation, and the adsorption of Cr(VI) by Cu₂Cl(OH)₃. This work provides a new insight into simultaneous removal of heavy metal cations and anions from wastewater by Cl-LDH.     

Simulated reaction of formaldehyde and ambient atmospheric particulate matter using a chamber

The reaction of HCHO with Beijing winter's real ambient particulate matter(PM) inside a 3.3 m~3 Teflon Chamber was conducted in this study. NO_2, O_3 and H_2O gases were removed from the ambient aerosol before entering into the chamber. The decays of HCHO were monitored(acetylacetone spectrophotometry method) during the reactions at different PM number concentrations(N_a) and relative humidities(RHs), and the formed particulate formate was detected by IC and XPS techniques. The results showed that when RH was10%–15%, the decay rate of HCHO in the chamber was higher with the existence of PM from relatively clean days(with number concentration(N_a) 200,000 particle/L, 0.35–22.5 μm)compared to dirty days(N_a 200,000 particle/L, 0.35–22.5 μm). When RH increased to 30%–45%, PM can hardly have significant influences on the decay of HCHO. The formations of formate on the reacted PM were consistent with the HCHO decay rates at different ambient PM N_aand RH conditions. This is a first study related to the "real" ambient PM reacted with HCHO and suggested that in the clean and low RH days, PM could be an effective medium for the conversion of HCHO to formate.     

沈阳一次严重污染天气过程持续和增强气象条件分析

2015年11月7-9日沈阳出现罕见的持续严重污染天气,采用环流形势、地面常规气象观测、污染物浓度观测、风廓线雷达及雨滴谱资料等,对此次污染成因进行了研究.结果表明:在此次严重污染天气过程中,连续22 h AQI≥500,首要污染物均为PM_2.5,其异常峰值最高达到1308μg/m3;ρ（PM_2.5）与ρ（PM₁₀）、ρ（NO₂）和ρ（CO）的相关系数分别达到0.996、0.602、0.891,并且ρ（PM_2.5）与ρ（PM₁₀）、ρ（CO）的正相关性更为显著;在污染的同时出现了降水,11月7和8日的日降水量分别为9.9和2.3 mm,但降水对污染物的稀释和清除作用并不明显.稳定的大尺度环流和对流层内中低层大气层结持续稳定、连续4个时次的探空曲线显示925~850 hPa之间存在多个逆温层（逆温强度最大可达5℃）、相对湿度较大（日均相对湿度在75%以上）,是此次严重污染天气持续的有利气象条件.风廓线雷达探测的整层大气垂直速度很小,多介于-1~1 m/s之间,并且近地面2 m/s以下弱下沉的垂直速度为严重污染天气过程提供了较好的动力条件.此外,近地面风力可达3~4级,有利于上游污染物的水平输送.研究显示,此次严重污染天气过程还与外围秸秆集中燃烧所导致的大量污染物长距离输送有密切关联.