A survey-based evaluation of community-based co-management of forest resources: a case study of Baishuijiang National Natural Reserve in China

Community-based co-management (CBCM) mechanisms for forest management have matured through the development of new economic analysis and common property theory. However, while many local CBCM mechanisms have been initiated in Chinese Natural Reserves, there are few objective, data-based evaluations of whether these mechanisms improve forest conservation and local livelihoods. This research uses Baishuijiang National Natural Reserve (BNNR) as a study case to evaluate China’s current CBCM mechanisms. The evaluation is based mainly on three criteria: efficiency, equality and sustainability of project operation. Survey data indicate that local CBCM mechanisms provide a wide-participation platform for local villagers, associated administration managers, research institutions and NGOs to join in forest resource protection work while improving local livelihood. CBCM projects have also facilitated a reduction in forest resource dependency, the improvement of household income and encouragement of local people to participate in forest resource protection. Our analysis suggests that most CBCM organizations have made progress in efficiency, equity and sustainability. However, further study should focus on how to deal with the lingering problems of inequity in responsibility and rights among CBCM committee members, poor distribution of benefits, insufficient program-design and management expertise, faulty information dissemination, and insufficient capital investment.     

地震救援行动的影响因素分析

从探讨救援行动的概念和响应过程出发,在分析国内外相关资料的基础上,结合我国的实际情况,分析了影响地震救援行动的方面和因素,以及它们对救援行动可能产生的影响,以期为地震救援的理论和实践提供有益的补充。     

基于汶川8.0级强震记录的近场地震动特征分析

在汶川8.0级大地震中,国家数字强震动台网布设在龙门山断裂带及其周围地区的50多个台站获得了大于100 Gal的加速度记录。选取其中断层附近11个台站的加速度记录,分别进行了地震反应谱分析和基于正交化HHT法的能量分布特征分析,通过对竖向与水平向加速度峰值比、竖向与水平向加速度反应谱比值,以及能量分布和峰值系数的分析与比较,探讨了汶川地震的近场地震动特征。     

自然灾害社会脆弱性评估研究——以上海市为例

基于投影寻踪聚类模型(PPC),结合基于实数编码的加速遗传算法(RAGA),对上海市进行了自然灾害社会脆弱性评估的尝试。结果表明:①灾害社会脆弱性最高的为崇明县,其次为宝山区和金山区;②灾害社会脆弱性最低的是黄埔区,其次是徐汇区和静安区;③总体而言,灾害脆弱性较低的地区集中于上海城市中心区,而城市边缘区的社会脆弱性一般较高。     

台风灾害债券设计——基于广东省数据的实证研究

台风作为全球发生频率最高,影响最严重的一种自然灾害,对我国的影响也非常严重。在巨灾风险证券化、巨灾债券已成为巨灾保险业大趋势的背景下,发展我国台风灾害债券具有重要的现实意义。以我国受台风灾害影响最严重的省份——广东省为研究对象,收集了其近30年相关台风损失数据,利用非寿险精算技术分析其台风的损失分布和次数分布,在此基础上利用CAMP模型和现金流分析对广东省的台风灾害债券做了初步设计。     

火灾下约束钢柱临界温度的简化计算方法

在火灾条件下,约束钢柱轴力由于升温而增加,会导致在较低的温度下发生屈曲;但屈曲后,钢柱的轴向温度膨胀得到释放,轴力下降,因此屈曲后钢柱仍能继续承栽。本文通过计算长度系数将转动约束钢柱转换为铰支钢柱,给出了一种轴向约束钢柱在火灾升温条件下的临界温度的简化计算方法——轴力放大系数设计方法。此法通过轴力放大系数将轴向约束钢柱转化为无约束钢柱,再按无约束钢柱计算得到钢柱的临界温度。用验证过的有限元模型对简化计算方法进行了验证,计算结果表明简化方法吻合较好。     

循环荷载对饱和黄土动剪模量的影响研究

利用装有压电陶瓷弯曲元的双向振动三轴仪对饱和黄土进行了循环荷载试验,并根据静力固结条件下黄土的动剪模量发展规律建立了基于哈定方程的拟合曲线;将循环荷载作用下的动剪模量与静力固结下的动剪模量进行了对比研究,并根据轴向应变的发展规律,确定了以上2种条件下动剪模量产生差异的原因:试样结构性破坏,土颗粒重排列,土体具有很高的敏感性。对于振动过程中的暂停对试验的影响进行了研究,认为由于暂停时间很短,可以忽略这种影响。在振动结束后,对试样在原压力下重新进行固结,结果表明,固结完成后,试样的动剪模量增大,且增大幅度随着密度的增加而变小。     

750kV罐式断路器内部接地故障保护动作行为分析

针对一起750kV罐式断路器内部接地故障,通过对保护动作数据和波形图进行综合分析,快速、准确地找出故障点并排除了故障。分析结果表明:故障原因为拉杆绝缘材料存在质量问题,在稳态电压下内部放电,致使其绝缘击穿。     

NOx Removal with Combined Selective Catalytic Reduction and Selective Noncatalytic Reduction: Pilot-Scale Test Results

Pilot-scale tests were conducted to develop a combined nitrogen oxide (NO_x) reduction technology using both selective catalytic reduction (SCR) and selective noncatalytic reduction (SNCR). A commercially available vanadium- and titanium-based composite honeycomb catalyst and enhanced urea (NH₂CONH₂) were used with a natural-gas-fired furnace at a NO_x concentration of 110 ppm. Changes in SNCR chemical injection temperature and stoichiometry led to varying levels of post-furnace ammonia (NH₃), which acts as the reductant feed to the downstream SCR catalyst. The urea-based chemical could routinely achieve SNCR plus SCR total NO_x reductions of 85 percent with less than 3 ppm NH₃ slip at reductant/NO_x stoichiometries ranging from about 1.5 to 2.5 and SCR space velocities of 18,000 to 32,000 h^?1. This pilot-scale research has shown that SNCR and SCR can be integrated to achieve high NO_x removal. SNCR provides high temperature reduction of NO_x followed by further removal of NO_x and minimization of NH₃ slip by a significantly downsized (high-space velocity) SCR.     

The Relationship between the Quantity of Heavy Metal and PAHs in Fly Ash

ABSTRACT

Heavy metal and polycyclic aromatic hydrocarbons (PAHs) in flue gas have received considerable attention in recent years due to their mutagenic or carcinogenic properties. The present study is carried out to investigate the influence of the quantity of heavy metals on PAHs formation in fly ash.

A fluidized bed incinerator was used in this experiment to obtain fly ash of chemical similarity by incinerating various compositions of waste. The obtained fly ash, both with and without heavy metal, were used to adsorb the PAHs in the flue gas and to investigate the formation of PAHs in fly ash. The results indicate that carbon and heavy metals most greatly influence the formation of PAHs in the fly ash. Carbon is absorptive; heavy metals encourage not only absorption of PAHs but also catalyze PAHs formation.