A systemic health risk assessment for the chromium cycle in Taiwan

Health risk assessment (HRA) has been recognized as a useful tool for identifying health risks of human activities. In particular, this method has been well applied to spatially defined units, such as a production plant, a treatment facility, and a contaminated site. However, the management strategies based on the risk information will be more efficient if the comprehensive picture of total risks from all kinds of sources is depicted. In principle, the total risks can be obtained when all risk sources are assessed individually. Apparently, this approach demands huge amount of efforts. This study develops a methodology that combines substance flow and risk estimation to facilitate examination of risk in a systemic way and provide comprehensive understanding of risk generation and distribution corresponding to flows of substances in the anthroposphere and the environment. Substance flow analysis (SFA) and HRA method is integrated to produce a systemic risk assessment method, from which substance management schemes can be derived. In this study, the chromium cycle in Taiwan is used as an example to demonstrate the method, by which the associated substance flow in the economy and the risk caused by the substance in the environmental system is determined. The concentrations of pollutants in the environmental media, the resultant risks and hazard quotients are calculated with the widely-used CalTOX multimedia model.     

含油污泥无害化处置优化研究及生命周期评价

提出含油污泥的优化处置方案,并通过生命周期评价方法(LCA)对优化方案进行环境影响评价。结果表明,与原处置工艺相比优化后环境负荷降低了99.62%。     

Effect of platinum on the photocatalytic degradation of chlorinated organic compound

TiO2 nanoparticles, doped with di erent Pt contents, were prepared by a modified photodeposition method using Degussa P-25 TiO2, H2PtCl6 6H2O and methanol as the solvents. The physicochemical properties of Pt/TiO2 were investigated by the nitrogen adsorption and desorption isotherm measurement technique, X-ray di raction analysis and photoluminescence spectra, respectively. Reaction rates from photocatalytic removal of dichloromethane over Degussa P-25 TiO2 and Pt/TiO2 were evaluated. The average diameter and BET surface area of the TiO2 catalyst particles were 300 nm and 50 m2/g, respectively. The degradation e ciency was 99.0%, 82.7%, 55.2%, and 57.9% with TiO2 at inlet concentrations of 50, 100, 200, and 300 ppm, respectively. And the degradation e ciency was 99.3%, 79.7%, 76.5%, and 73.4% with a 0.005 wt.% Pt/TiO2 at inlet concentrations of 50, 100, 200, and 300 ppm, respectively. In addition, we found that the photoluminescence emission peak intensities decreased with increases in the doping amount of Pt, which indicates that the irradiative recombination was weakened. Furthermore, the results showed that the UV/0.005 wt.% Pt/TiO2 process was capable of e ciently decomposing gaseous DCM in air.     

Removal of heavy metal ions from aqueous solution using red loess as an adsorbent

The adsorption behaviors of heavy metals onto novel low-cost adsorbent, red loess, were investigated. Red loess was characterized by X-ray diffraction, scanning electron microscopy and Fourier transform infrared spectra. The results indicated that red loess mainly consisted of silicate, ferric and aluminum oxides. Solution pH, adsorbent dosage, initial metal concentration, contact time and temperature significantly influenced the efficiency of heavy metals removal. The adsorption reached equilibrium at 4 hr, and the experimental equilibrium data were fitted to Langmuir monolayer adsorption model. The adsorption of Cu(II) and Zn(II) onto red loess was endothermic, while the adsorption of Pb(II) was exothermic. The maximum adsorption capacities of red loess for Pb(II), Cu(II) and Zn(II) were estimated to be 113.6, 34.2 and 17.5 mg/g, respectively at 25°C and pH 6. The maximum removal efficiencies were 100% for Pb(II) at pH 7, 100% for Cu(II) at pH 8, and 80% for Zn(II) at pH 8. The used adsorbents were readily regenerated using dilute HC1 solution, indicating that red loess has a high reusability. All the above results demonstrated that red loess could be used as a possible alternative low-cost adsorbent for the removal of heavy metals from aqueous solution.     

污水处理厂数据采集系统的设计与应用

以贵州某污水处理厂数据采集系统为例．介绍vXPLC和C≠≠为核心的数据采集系统的构成,通信网络的选型和总体设计思路,以及PLC和C#在该污水处理厂中的成功应用。     

石羊河流域1959年至2008年风速变化特征分析

利用线性拟合、Mann—Kendall方法、小波分析对石羊河流域五个测站空间平均的近50年来的逐日风速资料进行了倾向、周期、突变等特性分析。研究结果表明：1959年至2008年间,整个石羊河流域风速呈减小趋势,变化率约为-0．004m／（s．a）．而上游风速呈现明显的上升趋势。四个季节中冬季风速降低速度最大,而夏季风速呈现上升趋势。风速的长期变化还具有一定的突变性,年平均风速在1988年出现了由高到低的突变,表明风速开始下降。复值Morlet小波分析的结果显示,风速变化存在6a、13a、19a、25a四个峰值。其中19a的时间尺度为第一主周期。     

型煤产业发展与提高

本文论述发展工业型煤产业的重要意义和技术质量保证,洁净煤技术是控制污染和节约能源,提高煤炭资源利用率的重要技术项目,将粉煤生产成型煤,为工业、民用提供洁净的燃料,既充分利用煤炭资源同时改善能源结构,又有显著的环保效益,国家把煤炭产业列入中国洁净煤技术有限发展项目,目前制约型煤产业的发展要造气型和燃烧型煤并举,同时有利于用户的节能效益。     

高温下好氧污泥接种启动UASB的试验研究

采用高温UASB处理柠檬酸废水,研究利用好氧脱水污泥接种启动高温UASB的可行性。试验结果表明,在温度55℃,HRT为6天的条件下,UASB反应器能降解的柠檬酸废水浓度为10000mg/L,容积负荷为1.67gCOD/(L.d),柠檬酸废水的去除率达到90%以上。     

伊宁市城市水系现状调查及问题与对策

以泉水来源的伊宁市城市水系,具有特有城市标志的同时对伊宁市起着重要的生态、景观、润泽作用。近年来,城市建设的快速发展给伊宁市水系带来了新的问题。文章以如何保护好伊宁市城市水系为出发点,以现场调查及相关数据为基础,对现状问题进行分析,提出了城市水系保护方面的一些建议对策。     

污水处理厂产泥量与进水水质关系的研究

为研究阜阳污水处理厂近几年来污泥产量与进水水质之间的关系,对自2007年1月份以来的产泥量与进水水质的基础数据进行了整理．并通过建立各个数据之间的相互关系图表来分析产泥量与进水水质之间的关系。