甘肃亚高山云杉人工林土壤特性及水源涵养功能对林分密度的响应特征

定量分析不同密度云杉（Picea asperata）人工林的土壤特性及水源涵养功能,为人工林可持续经营提供理论依据。以28块7种不同密度梯度的云杉人工幼龄林为研究对象,采用样地调查及取样分析方法,测定土壤理化性质、枯落物持水量以及林地贮水性能等。结果表明：1）林分密度对云杉人工林的土壤容重、孔隙度、有机质含量、土壤持水量、枯落物蓄积量和持水量都具有显著影响,随着林分密度的增加,土壤孔隙度、土壤养分、枯落物蓄积量、枯落物持水量、土壤持水量表现为先增加后减小,而土壤容重则表现为先减小后增加。密度为1 550 株/hm²时林分土壤容重最小（1.09 g/cm³）,总孔隙度较大（58.99%）,有机质含量最高（9.12%）,枯落物总蓄积量最多（44.41 t/hm²）,最大持水量较高（166.67 t/hm²）,是密度为3 000 株/hm²林分的4.49倍,土壤持水性能较好（3 898.93 t/hm²）。2）根据林地总贮水量评价的涵养水源功能依次为林分密度1 550 株/hm²（4 068.36 t/hm²）>密度1 750 株/hm²（3 945.32 t/hm²）>密度1 350株/hm²（3 698.39 t/hm²）>密度1 060 株/hm²（3 484.10 t/hm²）>密度2 300 株/hm²（3 157.60 t/hm²）>密度850 株/hm²（2 915.03 t/hm²）>密度3 000 株/hm²（2 820.81 t/hm²）。3）在该研究的林分密度范围内,密度为1 550 株/hm²时林分的土壤特性及水源涵养功能最佳。     

Are current Chinese national ambient air quality standards on 24-hour averages for particulate matter sufficient to protect public health?

With rapid economic development and urbanization in recent decades, China has experienced the worsening of ambient air quality. For better air quality management to protect human health, Chinese government revised national ambient air quality standards(NAAQS) for particulate matter(PM) in 2012(GB3095-2012). To assess the effectiveness of current NAAQS for PM on public health in Chinese population, we conducted a metaanalysis on published studies examining the mortality risk of short-term exposure to PM with aerodynamic diameters less than 10 and 2.5 μm(PM_(10) and PM_(2.5)) in China. The reported24-hour concentrations of PM_(10) and PM_(2.5) in studies ranged from 43.5 to 150.1 μg/m~3 and 37.5 to 176.7 μg/m~3. In the pooled excess, mortality risk estimates of short-term exposure to PM.In specific, per 10 μg/m~3 increase in PM_(10), we observed increases of 0.40%(95%CI: 0.33%,0.47%), 0.57%(95%CI: 0.44%, 0.70%) and 0.49%(95%CI: 0.40%, 0.58%) in total, respiratory and cardiovascular mortality, per 10 μg/m~3 increase in PM_(2.5), we observed increases of 0.51%(95%CI: 0.38%, 0.63%), 0.62%(95%CI: 0.52%, 0.73%) and 0.75%(95%CI: 0.54%, 0.95%) in total,respiratory and cardiovascular mortality. Finally, we derived 125 μg/m~3 for PM_(10) and 62.5 μg/m~3 for PM_(2.5) as 24-hour recommendation values based on the pooled estimates. Our results indicated that current Chinese NAAQS for PM could be sufficient in mitigating the excess mortality risk from short-term exposure to ambient PM. However, future research on longterm exposure cohort studies in Chinese population is also essential in revising annual averages for PM in Chinese NAAQS.     

Behaviors and kinetics of toluene adsorption‐desorption on activated carbons with varying pore structure

This work was undertaken to investigate the behaviors and kinetics of toluene adsorption and desorption on activated carbons with varying pore structure. Five kinds of activated carbon from different raw materials were selected. Adsorption isotherms and breakthrough curves for toluene were measured. Langmuir and Freundlich equations were fitted to the equilibrium data, and the Freundlich equation was more suitable for simulating toluene adsorption. The process consisted of monolayer, multilayer and partial active site adsorption types. The effect of the pore structure of the activated carbons on toluene adsorption capacity was investigated. The quasi-first-order model was more suitable for describing the process than the quasi-second-order model. The adsorption data was also modeled by the internal particle diffusion model and it was found that the adsorption process could be divided into three stages. In the external surface adsorption process, the rate depended on the specific surface area. During the particle diffusion stage, pore structure and volume were the main factors affecting adsorption rate. In the final equilibrium stage, the rate was determined by the ratio of meso-and macro-pores to total pore volume. The rate over the whole adsorption process was dominated by the toluene concentration. The desorption behavior of toluene on activated carbons was investigated,and the process was divided into heat and mass transfer parts corresponding to emission and diffusion mechanisms, respectively. Physical adsorption played the main role during the adsorption process.     

海水中溶解氧碘量法测定结果的有效位数推算

当前海洋监测系统和环保监测系统面临着监测数据公开需求,溶解氧是环境监测的常规测项,其监测结果需要进行科学的规范性表达。有效数字能够体现测量值的可信程度,有效数字位数是测试结果规范表达的重要指标。本文详细分析"GB17378.4-2007海洋监测规范第4部分海水分析中第31章溶解氧"中的测定步骤中影响因素,对溶解氧测定结果的有效位数进行科学推断。分析表明,硫代硫酸钠浓度、硫代硫酸钠消耗体积、水样体积是关键影响因素。结果表明,硫代硫酸钠浓度有效位数3位,硫代硫酸钠使用体积有效位数3位或4位,水样体积有效位数5位;溶解氧碘量法测定结果的有效位数,通常为3位。     

四环素对人粪便好氧堆肥过程及微生物群落演替的影响

以人粪便和锯末为实验材料,研究了四环素(TC)对好氧堆肥过程中理化性质、酶活性以及微生物群落演替的影响.实验共设4个处理:CK(不添加TC)、TC100(100 mg·kg~(-1)TC)、TC250(250 mg·kg~(-1)TC)和TC500(500 mg·kg~(-1)TC).采用高通量16S rRNA基因测序技术对堆肥中微生物群落结构进行分析.结果表明,TC对堆肥理化性质的影响与其浓度有关,堆肥中TC浓度的增加显著抑制了堆肥温度的升高,增加了水溶性碳(WSC)的残留,降低了种子发芽率(GI)并抑制了脱氢酶活性(DHA).堆肥温度、WSC、GI和DHA等堆肥参数都可以用来表征堆肥的腐熟度,以上结果表明堆肥中TC浓度高达500 mg·kg~(-1)时,TC阻碍了人粪便好氧堆肥过程并影响堆肥产物的腐熟.而且,TC浓度的增加显著改变了堆肥中的微生物群落演替,降低了微生物的多样性和丰度.TC对堆肥过程和堆肥产物腐熟的主要不利影响是对微生物群落结构的干扰和对生物活性的抑制.     

长三角地区2015年大气重污染特征及其影响因素

基于2015年长三角地区129个环境空气质量监测站的空气质量指数（AQI）及主要大气污染物浓度数据,结合气象资料和HYSPLIT后向轨迹模式,探究长三角地区大气重污染的时间变化和空间集聚特征,并深入分析气象条件和区域传输对重污染过程发生和维持的影响.结果表明,2015年长三角地区各城市平均出现AQI超过200的重污染天气共8 d,重污染频率为2.01%,PM_2.5作为首要污染物出现频次最多.从时间变化看,重污染主要分布在1月和12月;从空间分布看,北部地区重污染相比南部地区更为严重,徐州和常州市出现频率最高.选取典型重污染过程1月9—11日（纬向扩散型）、1月24—26日（经向扩散型）和12月20—26日（两种模式相结合的重污染天气）进行成因分析,发现长三角地区重污染天气主要受到西北风向、低风速、高湿度和逆温层的影响,导致大气污染物积累且不易扩散.基于HYSPLIT的大气传输轨迹及频率分布表明,来自西北方向的气流对江苏北部地区的污染输送特征有着显著影响.     

改性膨润土和沉水植物联合作用处理沉积物磷

首次将改性膨润土（modified bentonite,MB）作为原位吸附材料与沉水植物苦草（Vallisneria spiralis,V.spiralis）联合处理沉积物磷.研究结果表明,MB可以促进沉水植物V.spiralis的生长, V.spiralis可能通过根系分泌作用促进溶磷或是通过促进根际微生物群落的P代谢活性增加沉积物中的生物可利用性P含量.MB与沉水植物V.spiralis对沉积物P的联合作用效果优于MB和沉水植物V.spiralis单独作用之和.厚度5cm MB和V.spiralis联合作用对沉积物TP,IP,OP,Fe/Al-P和Ca-P的去除率可达59.8%,57.1%,67.8%,66.7%和44.7%.微生物试验结果表明,厚壁菌门Erysipelotrichaceae科的菌属PSB-M-3是联合组相比单一V.spiralis组或单一MB组微生物群落P代谢功能增强的主要贡献者.本研究还首次发现了Erysipelotrichaceae科微生物可作为沉积物中潜在的除磷菌.研究结果表明MB和沉水植物联合控制沉积物磷技术可进一步应用到富营养化湖泊沉积物控制工程.     

道路雨水径流溶解性有机物与重金属结合作用分析

为了解道路雨水径流溶解性有机物(DOM)与重金属的相互作用,采用荧光激发-发射矩阵光谱、超滤、离子选择电极法及红外光谱等技术对道路雨水径流溶解性有机物及其组分同Cu~(2+)、Pb~(2+)和Cd~(2+)的络合作用进行了研究.结果表明,道路雨水径流DOM与3种重金属离子的络合作用由强到弱依次是:Cu~(2+)Pb~(2+)Cd~(2+),4种分子量DOM组分与重金属之间均发生了络合反应,且DOM组分分子量越小,与重金属之间的络合作用越强.4个不同分子量区间的DOM组分与Cu~(2+)、Pb~(2+)和Cd~(2+)之间的络合作用由强到弱的顺序为:1 kDa组分、1~10 kDa组分、10~30kDa组分、30 kDa~0.45μm组分.     

旧工业厂房结构安全鉴定方法探讨——以西安某旧工业厂房为例

在对全国典型旧工业厂房改造项目充分调研的基础上,针对不同的建筑结构形式,分别研究超声回弹综合法、平测法、半电池法、扁顶法等方法,对适用于旧工业厂房结构安全的鉴定方法进行探讨,分析鉴定方法针对旧工业厂房的适用性、科学性,对我国旧工业厂房安全改造有重要意义。     

水下穿越油气管道水流冲击作用下强度安全研究

油气管道穿越水流活动区域时,在水流冲击浮力作用下,油气管道面临漂管、大变形甚至断裂等强度失效风险。研究水流冲击作用下油气管道的强度安全性意义重大。描述分析了流水作用下管道的载荷特性,构建了水下管道有限元模型,分析了水流冲击、动静水浮力下管道的应力应变特性,构建了强度评价准则,对油气管道进行了安全评价,基于复壁管稳管技术,对水下管道进行了强度加强设计,为工程优化设计提供参考。