用苎麻生物脱胶废水生产热带假丝酵母单细胞蛋白

采用热带假丝酵母处理苎麻生物脱胶废水。将COD为23 060 mg/L的苎麻生物脱胶废水稀释1倍后进行发酵处理,COD去除率最高,为60.85%。发酵条件的正交实验结果表明:在发酵温度为35℃、初始发酵pH为7.0、接种量为10%、发酵时间为48 h的条件下,苎麻生物脱胶废水COD去除率最高;发酵温度为30℃、初始发酵pH为7.0、接种量为10%、发酵时间为48 h的条件下,单细胞蛋白生成量最高。发酵时间为48 h时,灭菌的发酵培养基的COD去除率为75.75%,单细胞蛋白生成量为5.375 g/L;未灭菌的发酵培养基的COD去除率为72.25%,单细胞蛋白生成量为2.875 g/L。     

Vocal competition in male Xenopus laevis frogs

Male Xenopus laevis frogs produce underwater advertisement calls that attract gravid females and suppress calling by male competitors. Here we explore whether groups of males establish vocal ranks and whether auditory cues alone suffice for vocal suppression. Tests of male–male pairs within assigned groups reveal linear vocal dominance relations, in which each male has a defined rank. Both the duration over which males interact, as well as the number of competitive opportunities, affect linearity. Linear dominance across the group is stable for about 2 weeks; rank is dynamic. Males engage in physical interactions (clasping) while paired but clasping and vocal rank are not correlated. Playbacks of advertisement calls suppress calling and calls from high- and low-ranking males are equally effective. Thus, auditory cues alone suffice to suppress vocal behavior. Playback intensities equivalent to a nearby male advertising effectively suppress calling while low-intensity playbacks are either ineffective or stimulate vocal behavior. X. laevis advertisement calls are biphasic, composed of alternating fast and slow click trills. Approximately half the males tested are more vocally suppressed by all slow than by all fast trills; thus, these males can distinguish between the two phases. The fully aquatic family Pipidae diverged from terrestrial ancestors approximately 170 mya. Vocal suppression in the X. laevis mating system may represent the translation of an ancient anuran social strategy to underwater life.     

基于LEAP模型的工业园区碳达峰路径：以南京某国家级开发区为例

工业园区是能源消费和碳排放的密集区域,推动工业园区碳达峰对国家早日实现碳达峰目标具有重要意义.以南京某国家级开发区为例,基于LEAP模型,设置基准情景（BAU）、非工业减排（S1）、全行业一般减排（S2）、全行业强化减排（S3）和深度减排（S4）共5类情景,分析各情景下的能源消费需求和CO2排放变化情况,评估各项措施的碳减排贡献,提出园区实现碳达峰目标的政策建议.结果表明,S2、S3和S4情景下能源消费需求和CO2排放量将分别于2035、2030和2028年达到峰值,能源消费需求峰值（以标煤计）分别为26.28、21.66和19.10万t,CO2排放峰值分别为75.35、59.34和53.24万t.工业是研究区域能源消费和碳排放的主要贡献行业,S2、S3和S4情景下工业能源消费和碳排放占比分别于2035年、2030年和2028年达到峰值57.1%、56.0%、53.6%和64.2%、66.2%和62.9%.工业能效提升的碳减排贡献最大,其次为经济增速放缓,交通新能源汽车推广和公共建筑节能的碳减排贡献不显著.综合考虑碳达峰时间和园区碳排放强度考核目标,建议将S3情景作为该园区碳达峰的实施...     

环境自动监测站固定式辐射监测仪性能测试与评价

参考计量技术规范《固定式环境γ辐射空气比释动能(率)仪现场校准规范》(JJF 1733—2018),对辐射环境空气自动监测站78台高气压电离室开展辐射特性测试。现场校准方面,仅88%的电离室满足1±0.2的响应范围要求;78台电离室的重复性均不超过1%,响应的非线性均不超过6.5%,符合规范要求。针对电离室开展辐射性能测试,发现电离室在9.0×10^-2~1.0×10⁹ μGy/h范围内的响应均不超过1±0.2;电离室对164 keV以上的光子的能量响应趋于1.0,对60 keV以下的光子无响应能力,而当光子能量在60~164 keV范围内时,响应曲线会因γ光子与电离室内部惰性气体的光电效应出现"鼓包";电离室不具备对核临界事故脉冲辐射的监测与警示能力;电离室能够在2 s内给出测量范围内的准确示值,但在分段电压的交界处,响应时间会延长至180~360 s;电离室的响应受环境温度、湿度变化的影响大小不足±0.01,表明电离室的环境适应性优良。     

Prediction of high-density polyethylene pyrolysis using kinetic parameters based on thermogravimetric and artificial neural networks

● Reducting the sampling frequency can enhance the modelling process. ● The pyrolysis of HDPE was investigated at three different heating rates. ● The average E_a and k₀ were calculated by Friedman, KAS, FWO, and CR methods. ● ANN was employed to predict the HDPE weight loss with the optimal MSE and R². Pyrolysis is considered an attractive option and a promising way to dispose waste plastics. The thermogravimetric experiments of high-density polyethylene (HDPE) were conducted from 105 °C to 900 °C at different heating rates (10 °C/min, 20 °C/min, and 30 °C/min) to investigate their thermal pyrolysis behavior. We investigated four methods including three model-free methods and one model-fitting method to estimate dynamic parameters. Additionally, an artificial neural network model was developed by providing the heating rates and temperatures to predict the weight loss (wt.%) of HDPE, and optimized via assessing mean squared error and determination coefficient on the test set. The optimal MSE (2.6297 × 10⁻²) and R² value (R² > 0.999) were obtained. Activation energy and pre-exponential factor obtained from four different models achieves the acceptable value between experimental and predicted results. The relative error of the model increased from 2.4 % to 6.8 % when the sampling frequency changed from 50 s to 60 s, but showed no significant difference when the sampling frequency was below 50 s. This result provides a promising approach to simplify the further modelling work and to reduce the required data storage space. This study revealed the possibility of simulating the HDPE pyrolysis process via machine learning with no significant accuracy loss of the kinetic parameters. It is hoped that this work could potentially benefit to the development of pyrolysis process modelling of HDPE and the other plastics.     

基于膨胀特性的厌氧流化床反应器的设计和运行控制

生物流化床的床层膨胀行为直接与生化反应区的水动力学和效率相关 ,床层膨胀特性是进行合理设计和运行的重要依据。目前流化床设计一般没有考虑生物膜的影响 ,但生物颗粒的流化行为有别于光滑载体 ,因此需要对曳力系数Cd 和膨胀特性方程中的ui 进行必要的修正。在综合分析基础上 ,探讨了优化两相流化床设计和运行的程序和方法     

谷氨酸棒杆菌合成新型生物絮凝剂分批发酵过程的溶氧控制模式

在3L发酵罐上系统研究溶氧水平对谷氨酸棒杆菌菌体生长及新型生物絮凝剂REA 11合成的影响,提出生物絮凝剂REA 11合成的分阶段供氧控制策略:发酵过程0～16h维持体积传氧系数kLa为100h-1,16h后降低kLa为40h-1至发酵结束,整个发酵过程通气量保持在1L·L-1·min-1.采用该分阶段供氧控制策略,生物絮凝剂最终产量达到900mg·L-1,发酵周期缩短到30h,比恒定kLa为40h-1条件下的REA 11产量(549mg·L-1)提高了64%,产率提高了45%,生产强度也比kLa恒定为40h-1,100h-1和200h-1的分批发酵过程分别提高了81 2%,120%和420%,实现了高细胞生长速率和高产物产率的统一.     

活性白土对餐饮业废油脂脱色工艺的探索

选用活性白土对餐饮业废油脂进行脱色研究,对脱色率的影响因素进行了讨论。摸索出活性白土的最佳脱色条件：活性白土用量5％;初始脱色温度60C;终止脱色温度120C;脱色时间25min。     

《大气污染防治法(修订草案)》第四十五条正当性审视

第十二届全国人大常委会第十二次会议初次审议了国务院提请审议的《大气污染防治法(修订草案)》,修订草案第四十五条拟授权省、自治区和直辖市人民政府可以采取机动车限行措施,其正当性引起社会的激烈讨论。机动车限行涉及公民所有权的限制,授权的合法性与正当性应受到公法上法律保留原则和比例原则的审查。草案第四十五条未区分高排放与低排放机动车、常态限制与临时限制,模糊地授权地方立法,不符合法律创设的目的性及必要性要求,第四十五条必须进一步明确授权范围。     

大港油田区域在线监测系统建设与管理

污染源在线监测系统的应用是环境执法、科学管理的重要手段。概述了大港油田区域在线监测系统建设现状及管理现状。分析管理中发现的典型问题,提出应对措施。针对实时数据与COD实测数据偏差较大,提出通过计算显示值与数采仪数据之差,手动调节在线监测仪的输出电流,从而有效降低数据传输偏差;针对COD在线监测仪受氯离子干扰而导致数据异常现象,从三方面提出解决办法:强化对前段来液的处理水平,适当增加掩蔽剂的投入量,选择更加适合的在线监测方法。