Environmental impact evaluation of feeds prepared from food residues using life cycle assessment

There is increasing concern about feeds prepared from food residues (FFR) from an environmental viewpoint; however, various forms of energy are consumed in the production of FFR. Environmental impacts of three scenarios were therefore investigated and compared using life cycle assessment (LCA): production of liquid FFR by sterilization with heat (LQ), production of dehydrated FFR by dehydration (DH), and disposal of food residues by incineration (IC). The functional unit was defined as 1 kg dry matter of produced feed standardized to a fixed energy content. The system boundaries included collection of food residues and production of feed from food residues. In IC, food residues are incinerated as waste, and thus the impacts of production and transportation of commercial concentrate feeds equivalent to the FFR in the other scenarios are included in the analysis. Our results suggested that the average amounts of greenhouse gas (GHG) emissions from LQ, DH, and IC were 268, 1073, and 1066 g of CO(2) equivalent, respectively. The amount of GHG emissions from LQ was remarkably small, indicating that LQ was effective for reducing the environmental impact of animal production. Although the average amount of GHG emissions from DH was nearly equal to that from IC, a large variation of GHG emissions was observed among the DH units. The energy consumption of the three scenarios followed a pattern similar to that of GHG emissions. The water consumption of the FFR-producing units was remarkably smaller than that of IC due to the large volumes of water consumed in forage crop production.     

Microbial Poly(L-Lactide)-Degrading Enzyme Induced by Amino Acids, Peptides, and Poly(L-Amino Acids)

Poly(L-lactide)(PLA)-degrading activities of a fungus, Tritirachium album, and two strains of actinomycetes,Lentzea waywayandensis and Amycolatopsis orientalis, were inducible by some proteins (poly-L-amino acid), peptides and amino acids. Extracellular PLA-degrading activity of the culture filtrates was detected when these strains grew in liquid basal medium containing 0.1% (w/v) of (poly-L-amino acids), peptides or amino acids as the enzyme inducer. In addition to PLA-degrading activity, succinyl-(L-alanyl-L-alanyl-L-alanine)-p-nitroanilide (Suc-(Ala)₃-pNA)-degrading activity was observed, implying that the enzymes produced were protease-type. The enzyme activities produced varied between different strains and different inducers. Silk fibroin was the best inducer for A. orientalis and that elastin was the best inducer for L. waywayandensis and T. album.     

Distribution behavior of pyrene to adsorbed humic acids on kaolin

The distribution behavior of pyrene on humic acid (HA)-kaolin complexes, prepared by adsorbing HA on kaolin, was investigated by batch experiments. The distribution coefficient (Kd) of pyrene on the HA-kaolin complex increased with the fraction (f(oc)) of organic carbon adsorbed to the surface of the kaolin. This can be attributed to hydrophobic interactions between pyrene and the adsorbed HAs. The effects of adsorbed HAs were quantitatively evaluated by calculating the distribution coefficient (K(oc)) and affinity constant (K(oc)ads) for pyrene to the adsorbed HAs. A fluorescence quenching method was employed to determine the affinity constant (K(oc)aq) of pyrene to HAs dissolved in an aqueous solution. When the K(oc) values were compared with the K(oc)aq values, the K(oc) values were found to be 4 to 11 times larger than the K(oc)aq values. On the other hand, the K(oc)ads values were 4 to 9 times larger than the K(oc)aq values. These indicate that the affinity for pyrene is enhanced by the adsorption of HAs to kaolin. In addition, the K(oc) values increased with increasing average molecular weights of the HAs. These results demonstrate that HAs, when they are adsorbed to clay minerals, play an important role in the deposition of polycyclic aromatic hydrocarbons (PAHs) in a soil environment.     

Preparation and characteristics of high performance paper containing titanium dioxide photocatalyst supported on inorganic fiber matrix

A novel paper-based material containing titanium dioxide (TiO₂) photocatalyst was successfully prepared by a papermaking technique with the internal addition of inorganic fibers on which TiO₂ particles were supported. Photodegradation performance of acetaldehyde gas, an indoor pollutant, and the durability of the TiO₂-containing papers were investigated under UV irradiation. Ceramic fiber suspension and polydiallyldimethylammonium chloride as a cationic flocculant were mixed, followed by the addition of TiO₂ suspension and anionic polyacrylamide. Subsequently, the inorganic mixture was poured into a pulp suspension, and TiO₂ handsheets then prepared by a papermaking method. The tensile strength of TiO₂-containing paper without a ceramic carrier decreased by more than 30% after 240-h UV irradiation (2 mW/cm²), although the strength of the TiO₂ sheet with ceramic fibers remained reasonably stable. The efficiency of acetaldehyde decomposition by the TiO₂ paper containing an inorganic carrier was nearly equal to that of the carrier-free TiO₂ paper. Scanning electron microscopic observation suggested that most TiO₂ particles were predominantly supported on the inorganic fiber matrix, and were mostly out of contact with organic pulp fibers. The TiO₂ paper with an inorganic carrier demonstrated both excellent photocatalytic performance and durability, which before had been mutually incompatible for organic materials containing TiO₂ photocatalyst. The two-stage mixing procedure for TiO₂ sheet-making is promising for the simple manufacture of high performance paper with photocatalytic ability.     

Long Range Transport of Asian Dust from Dust Storms and its Impact on Japan

We simulated the long range transport of dust emitted from dust storms that occurred in China by using a global three-dimensional chemical transport model. A modified dust emission flux scheme and a nonlocal diffusion scheme for determining the atmospheric eddy diffusivity in the atmospheric boundary layer were implemented to improve the chemical transport model. We examined the dust transport by comparing the model results with TOMS satellite images. The model calculated monthly total deposition of dust masses were used for comparison with the measurements collected at sampling stations in Japan, and good agreement was found. The model generally reproduced the temporal and spatial variations of dust reasonably well.     

长良川水质中溶解氧和化学耗氧量预测模型的建立

文章介绍了GMDH(group method of data handling)方法的基本运算法则，运用改进后的GMDH方法，建立长良川溶解氧和化学耗氧量两个水质项目的长期预到模型，模型相关度可达0．96，基本满足要求，并根据模型对水质变化机理进行分析。     

Assessing the economic value of urban green spaces in Kuala Lumpur

Environmental Science and Pollution Research - This study assessed the economic value of public urban green spaces (UGSs) in Kuala Lumpur (KL) city by using the hedonic price method (HPM). It...     

How seasonality affects the flow of estrogens and their conjugates in one of Japan's most populous catchments

A detailed study of the free and conjugated estrogen load discharged by the eight major sewage treatment plants into the Yodo River basin, Japan was carried out. Sampling campaigns were focused on the winter and autumn seasons from 2005 to 2008 and the free estrogens estrone(E1), 17β-estradiol(E2), estriol(E3), 17α-ethynylestradiol(EE2) as well as their conjugated (sulfate and glucuronide) forms. For both sewage effluent and river water E2 and E1 concentrations were greatest during the winter period (December-March). This coincides with the period of lowest rainfall and lowest temperatures in Japan. E1 was the dominant estrogenic component in effluent (means of 10-50 ng/L) followed by E2 (means of 0.5-3 ng/L). The estrogen sulfate conjugates were found intermittently in the 0.5-1.7 ng/L concentration range in the sewage effluents. The greatest estrogen exposure was found to be in the Katsura River tributary which exceeded 1 ng/L E2-equivalents during the winter period.     

Woody biomass and RPF gasification using reforming catalyst and calcium oxide

This study focused on steam gasification and reforming of waste biomass using a reforming catalyst. The purpose of the study was to evaluate the durability of a commercial Ni reforming catalyst and the effect of CaO on the reforming behavior, and to clarify detailed factors of catalytic performance, as well as the effect of operating parameters on the characteristics of produced gas composition. Moreover, catalyst regeneration was carried out and the behavior of catalytic activity based on gas composition was investigated. Using a fluidized bed gasifier and a fixed bed reformer, gasification and reforming of waste biomass were carried out. Commercial Ni-based catalyst and calcined limestone (CaO) were applied to the reforming reaction. Temperature of the gasifier and reformer was almost 1023 K. Ratio of steam to carbon in the feedstock [mol mol⁻¹] and equivalence ratio (i.e., ratio of actual to theoretical amount of oxygen) [-] were set at about 2 and 0.3, respectively. The feed rate of the feedstock into the bench-scale gasifier was almost 15 kg h⁻¹. The results of waste biomass gasification confirmed the improvement in H₂ composition by the CO₂ absorption reaction using the reforming catalyst and CaO. In addition, CaO proved to be especially effective in decreasing the tar concentration in the case of woody biomass gasification. Catalytic activity was maintained by means of catalyst regeneration processing by hydrogen reduction after air oxidation when woody biomass was used as feedstock.     

Coagulation characteristics of humic acid modified with glucosamine or taurine

To suppress the coagulation of humic acid (HA) in aqueous solutions, HA was modified with hydrophilic amines, such as glucosamine or taurine. These amines were attached to carboxyl groups in HA via amide bond formation. The degree of modification (R(m)) was estimated to be 21-38%. Infrared spectra of the modified HAs were also consistent with the presence of amide bonds. Acid-base titration showed that the average acid-dissociation constant (pK(app)) of the HA samples was increased by the modification. The Ca(2+) binding capacity of HA decreased with an increase in R(m) value. Critical pH or Ca(2+) concentration, at which HA coagulation occurs, was increased as the result of the modification. These critical points for taurine-HA were higher than those for glucosamine-HA. This is mainly due to electrostatic repulsion by sulfonate groups in taurine. These results indicate that the coagulation of HA is suppressed by modifying the molecules with glucosamine or taurine.