Effect of tributyltin on veliger larvae of the Manila clam, Ruditapes philippinarum

We investigated the effects of waterborne and maternal exposure to tributyltin (TBT) on veliger larvae of the Manila clam, Ruditapes philippinarum. In a waterborne exposure test, veliger larvae (D-larvae stage: 24h after fertilization) were exposed to TBT at measured concentrations of <0.01 (control), 0.055, 0.130, 0.340, and 0.600microg/l for 13d. The percentage of normal veliger larvae (the ratio of normal veliger larvae to all larvae) decreased significantly in all TBT treatment groups compared with that in the control group. In a maternal exposure test, 100 clams were exposed to TBT at measured concentrations of <0.01 (control), 0.061, and 0.310microg/l at 20-22 degrees C for 3 weeks, and the percentage of normal veliger larvae assessed for 13d. No maternal effects on veliger larvae from TBT were observed in TBT treatment groups as compared with the control group. These results demonstrate that waterborne TBT affects Manila clam veliger larvae, and indicates that TBT may have reduced Manila clam populations by preventing the development and survival of veliger larvae.     

A sex pheromone component novel to Ostrinia identified from Ostrinia latipennis (Lepidoptera: Crambidae)

Summary. Extracts from the sex pheromone gland of Ostrinia latipennis (Lepidoptera: Crambidae) were analyzed by gas chromatography-electroantennographic detection (GC-EAD) and GC-mass spectrometry. Only an EAD-active compound was detected in the extract, and it was identified as (E)-11-tetradecenol (E11-14:OH). In a wind-tunnel bioassay, E11-14:OH elicited a series of mate finding behaviors from males, although it was far less active than virgin females and crude extract of the pheromone gland. The attractiveness of E11-14:OH to O. latipennis males was confirmed by field trapping experiments. Based on these findings, we concluded that E11-14:OH, which is novel to the genus Ostrinia, is a major component of the sex pheromone in O. latipennis. The significance of the use of alcohol in place of the usual acetates in Ostrinia is discussed in relation to the pheromone biosynthesis system. Received 9 December 1999; accepted 14 March 2000     

Future year ozone source attribution modeling studies for the eastern and western United States

Three modeling approaches, the U.S. Environmental Protection Agency’s (EPA) Community Multiscale Air Quality (CMAQ) zero-out, the Comprehensive Air quality Model with extensions (CAMx) zero-out, and the CAMx probing tools ozone source apportionment tool (OSAT), were used to project the contributions of various source categories to future year design values for summer 8-hr average ozone concentrations at selected U.S. monitors. The CMAQ and CAMx zero-out or brute-force approaches predicted generally similar contributions for most of the source categories, with some small differences. One of the important findings from this study was that both the CMAQ and CAMx zero-out approaches tended to apportion a larger contribution to the “other” category than the OSAT approach. For the OSAT approach, this category is the difference between the total emissions and the sum of the tracked emissions and consists of non-U.S. emissions. For the zero-out approach, it also includes the effects of nonlinearities in the system because the sum of the sensitivities of all sources is not necessarily equal to the sum of their contributions in a nonperturbed environment. The study illustrates the strengths and weaknesses of source apportionment approaches, such as OSAT, and source sensitivity approaches, such as zero-out. The OSAT approach is suitable for studying source contributions, whereas the zero-out approach is suitable for studying response to emission changes. Future year design values of summer 8-hr average ozone concentrations were projected to decrease at all the selected monitors for all the simulations in each city, except at the downtown Los Angeles monitor. Both the CMAQ and CAMx results showed all modeled locations project attainment in 2018 and 2030 to the current National Ambient Air Quality Standards (NAAQS) level of 75 ppb, except the selected Los Angeles monitor in 2018 and the selected San Bernardino monitor in 2018 and 2030.

Implications:This study illustrates the strengths and weaknesses of three modeling approaches, CMAQ zero-out, CAMx zero-out, and OSAT to project contributions of various source categories to future year design values for summer 8-hr average ozone concentrations at selected U.S. monitors. The OSAT approach is suitable for studying source contributions, whereas the zero-out approach is suitable for studying response to emission changes. Future year design values of summer 8-hr average ozone concentrations were projected to decrease, except at the downtown Los Angeles monitor. Comparing projections with the current NAAQS (75 ppb) show attainment everywhere, except two locations in 2018 and one location in 2030.     

The Validation of a Passive Sampler for Indoor and Outdoor Concentrations of Volatile Organic Compounds

Abstract

Volatile organlcs compounds (VOCs) are ubiquitous in the air we breathe. The use of passive samplers to measure these concentrations can be an effective technique. When exposed for long durations, a passive sampler may be a good tool for investigating chronic exposures to chemicals in the environment. A passive sampler that was designed for occupational exposures can be used as such a tool. Laboratory validation under as many conditions as possible needs to be accomplished so as to characterize the sampler with known parameters. This paper describes the methods and results of an investigation into the validity of using a passive monitor to sample VOCs for a three-week period. Two concentration levels, two relative humidities, and five VOCs were studied. Results indicate that the samplers work best under conditions of high concentration with low relative humidity and low concentration with high relative humidity. For the passive sampler, excluding chloroform, percent deviations from the predicted values varied between ?41 and +22 percent; while the values between the passive and the active samplers varied between ?27 and +24 percent. Benzene, heptane, and perchloroethylene were sampled with equal precision and accuracy.     

Estimation and field measurement of methane emission from waste landfills in Hanoi, Vietnam

A methodology for estimating the methane emissions from waste landfills in Hanoi, Vietnam, as part of a case study on Asian cities, was derived based on a survey of documents and statistics related to waste management, interviews with persons in charge, and field investigations at landfill sites. The waste management system in Hanoi was analyzed to evaluate the methane emissions from waste landfill sites. The quantity of waste deposited into the landfill was evaluated from an investigation of the waste stream. The composition of municipal waste was surveyed in several districts in the Hanoi city area, and the quantities of degradable organic waste that had been deposited into landfill for the past 15 years were estimated. Field surveys on methane emissions from landfills of different ages (0.5, 2, and 8 years) were conducted and their methane emissions were estimated to be 120, 22.5, and 4.38 ml/min/m², respectively. The first-order reaction rate of methane generation was obtained as 0.51/year. Methane emissions from waste landfills were calculated by a first-order decay model using this emission factor and the amount of landfilled degradable waste. The estimates of methane emissions using the model accorded well with the estimates of the field survey. These results revealed that methane emissions from waste landfills estimated by regional-specific and precise information on the waste stream are essential for accurately determining the behavior of methane emissions from waste landfills in the past, present, and future.     

Development of a testing method for asbestos fibers in treated materials of asbestos containing wastes by transmission electron microscopy

Appropriate treatment of asbestos-containing wastes is a significant problem. In Japan, the inertization of asbestos-containing wastes based on new treatment processes approved by the Minister of the Environment is promoted. A highly sensitive method for testing asbestos fibers in inertized materials is required so that these processes can be approved. We developed a method in which fibers from milled treated materials are extracted in water by shaking, and are counted and identified by transmission electron microscopy. Evaluation of this method by using asbestos standards and simulated slag samples confirmed that the quantitation limits are a few million fibers per gram and a few μg/g in a sample of 50 mg per filter. We used this method to assay asbestos fibers in slag samples produced by high-temperature melting of asbestos-containing wastes. Fiber concentrations were below the quantitation limit in all samples, and total fiber concentrations were determined as 47–170 × 10^?6 f/g. Because the evaluation of treated materials by TEM is difficult owing to the limited amount of sample observable, this testing method should be used in conjunction with bulk analytical methods for sure evaluation of treated materials.     

Female sex pheromone and male behavioral responses of the bombycid moth <Emphasis Type="Italic">Trilocha varians</Emphasis>: comparison with those of the domesticated silkmoth <Emphasis Type="Italic">Bombyx mori</Emphasis>

Analysis of female sex pheromone components and subsequent field trap experiments demonstrated that the bombycid moth Trilocha varians uses a mixture of (E,Z)-10,12-hexadecadienal (bombykal) and (E,Z)-10,12-hexadecadienyl acetate (bombykyl acetate) as a sex pheromone. Both of these components are derivatives of (E,Z)-10,12-hexadecadienol (bombykol), the sex pheromone of the domesticated silkmoth Bombyx mori. This finding prompted us to compare the antennal and behavioral responses of T. varians and B. mori to bombykol, bombykal, and bombykyl acetate in detail. The antennae of T. varians males responded to bombykal and bombykyl acetate but not to bombykol, and males were attracted only when lures contained both bombykal and bombykyl acetate. In contrast, the antennae of B. mori males responded to all the three components. Behavioral analysis showed that B. mori males responded to neither bombykal nor bombykyl acetate. Meanwhile, the wing fluttering response of B. mori males to bombykol was strongly inhibited by bombykal and bombykyl acetate, thereby indicating that bombykal and bombykyl acetate act as behavioral antagonists for B. mori males. T. varians would serve as a reference species for B. mori in future investigations into the molecular mechanisms underlying the evolution of sex pheromone communication systems in bombycid moths.     

Feasibility investigation on a dual waste-plastics recycling system concept

Fiber-reinforced plastics (FRP) were first used as a material for boats and bath tubs about 40 years ago. Because of their great durability, wastes including FRP products are increasing. In addition, since the FRP resin is synthesized from expensive reactants, material recycling is highly desirable. Recycling using supercritical water is one solution; however, the cost of producing the high pressure and temperature needed to produce supercritical water prevents the concept from being realized. Therefore, we proposed a system concept based on dual waste-plastics recycling. A numerical survey of the results confirmed that our concept was feasible and would contribute to resource recycling as we expected. Received: January 6, 1998 / Accepted: July 23, 1999     

An Analytical Method to Determine Henry’s Law Constant For Selected Volatile Organic Compounds At Concentrations And Temperatures Corresponding To Tap Water Use

Henry’s law constants (H) are needed to model human exposure to Volatile Organic Compounds (VOCs) in Indoor air resulting from the use of tap water. This paper presents an experimental method to determine Hs for several common tap water pollutants at concentrations and temperatures used in household water. For 5 VOCs Henry’s law constants were obtained simultaneously over the 25° C to 45° C temperature range, providing data on H beyond the currently available data (up to 35° C). Henry’s law constants were obtained as the ratio of equilibrium concentrations of VOCs in air and water, using simultaneous sampling from sealed bottles kept at constant temperatures. Air and water samples were concentrated by a purge-and-trap method, thermally desorbed from a Tenax trap, and analyzed with a gas chromatograph with an electron capture detector (GC-ECD). Experimental results agreed well with available literature data.