The pollution and ecological risk of endosulfan in soil of Huai’an city, China

Endosulfan, a persistent organic pollutant newly listed under the Stockholm Convention, is currently widely produced and used as a pesticide in China. Concentrations of endosulfans (including α-, β-isomers, and their metabolite endosulfan sulfate) were determined in surface soil collected from Huai’an city, where the largest endosulfan producer is located. The concentrations of Σendosulfan (sum of α-endosulfan, β-endosulfan, and endosulfan sulfate) at all sites ranged from 0.28 to 44.81?ng/g dry weight (dw), following a lognormal distribution. The geometric mean was 1.09?ng/g dw, and the geometric standard deviation was 3.02. The β-endosulfan levels were consistently greater than those of α-isomer. The concentration ratios of α-endosulfan to β-endosulfan ranged from 0.03 to 0.70, which were much lower than the commercial endosulfan mixture. This is because that α-endosulfan is more volatile and degrades faster than β-endosulfan in soil. The contour map of Σendosulfan levels in soil indicates that the factory was the point pollution source with the highest endosulfan level in its surrounding area, especially the southern area. However, the non-point agricultural sources are more important. Based on Monte Carlo simulation, the Σendosulfan inventory in soil in Huai’an is estimated to be 0.8–3.0 tons. In order to understand the potential ecological risk of endosulfan, the Monte Carlo-based hazard quotient distribution was estimated and showed that Σendosulfan posed a potentially high risk to soil organisms. To our knowledge, this study is the first that reports soil pollution and risk of endosulfan around the manufacturer in China. This study will help China’s implementation of Stockholm Convention for the reduction and elimination of endosulfan in future.     

Development of a dynamic transfer model of (14)C from the atmosphere to rice plants

A dynamic compartment model was investigated to describe ¹⁴C accumulation in rice plants exposed to atmospheric ¹⁴C with temporally changing concentrations. In the model, rice plants were regarded to consist of three compartments: the ear and the mobile and immobile carbon pools of the shoot. Photosynthetically fixed carbon moves into the ear and the mobile carbon pool, and these two compartments release a part of this carbon into the atmosphere by respiration. Carbon accumulated in the mobile carbon pool is redistributed to the ear, while carbon transferred into the immobile carbon pool from the mobile one is accumulated there until harvest. The model was examined by cultivation experiments using the stable isotope, ¹³C, in which the ratios of carbon photosynthetically fixed at nine times during plant growth to the total carbon at the time of harvest were determined. The model estimates of the ratios were in relatively good agreement with the experimental observations, which implies that the newly developed compartment model is applicable to estimate properly the radiation dose to the neighboring population due to an accidental release of ¹⁴C from nuclear facilities.     

Timing of metamorphosis and larval segregation of the Atlantic eels Anguilla rostrata and A. anguilla, as revealed by otolith microstructure and microchemistry

Otolith microstructure and microchemistry were examined in juveniles of American (Anguilla rostrata) and European (A. anguilla) eels. Otolith increment width markedly increased from age 132 to 191 d (156 ± 18.9 d; mean ± SD) in A. rostrata and 163 to 235 d (198 ± 27.4 d; mean ± SD) in A. anguilla, both of which were coincident with drastic decreases in otolith Sr:Ca ratios, suggesting that metamorphosis from leptocephalus to glass eel began at those ages in each species. The duration of metamorphosis was estimated to be 18 to 52 d from otolith microstructure, for both species studied. Ages at recruitment were 171 to 252 d (206 ± 22.3 d; mean ± SD) in A. rostrata and 220 to 281 d (249 ± 22.6 d; mean ± SD) in A. anguilla. In these two species, positive linear relationships were found in ages between the beginning of metamorphosis and recruitment, suggesting that early metamorphosing larvae recruited at younger ages. Duration of the leptocephalus stage to recruitment in A. anguilla was about 40 d longer than that in A. rostrata. The geographical segregation between the two species in the Atlantic Ocean seems to be involved in the differences in the duration of the leptocephalus stage (age at metamorphosis). Received: 8 November 1999 / Accepted: 8 May 2000     

One-pot wet ball-milling for waste wire-harness recycling

Journal of Material Cycles and Waste Management - In this study, we developed a one-pot wet ball-milling method for the recovery of highly pure copper wire, poly(vinyl chloride) (PVC) coating, and...     

Sanitation of seawater effluent from seaweed processing plants using a photo-catalytic TiO2 oxidation

A fine porcelain open-cell photo-catalytic filter with titanium dioxide (TiO(2)) was evaluated for sterilization and sanitation of bio-polluted industrial water. In simulated seawater industrial effluent samples, the populations of Escherichia coli and Vibrio parahaemolyticus quickly decreased and reached non-detectable level within 10min. In seawater effluents from a seaweed processing plant, the bacterial populations in two samples quickly decreased by more than 10(3). In another two samples the decreases were slow and lowered by less than 10(2). Using fluorescence microscopy, it was indicated that the bacterial cells treated with photo-catalytic TiO(2) were damaged. In addition, the protein concentration in simulated seawater effluent slowly decreased using the photo-catalytic TiO(2) reaction; and reached similar concentrations as seawater near cultured seaweed beds. These results indicate that using a reactor with a TiO(2) photo-catalyst filter was effective for the sanitation of seawater effluents.     

Reconstructed 3D models of digestive organs of developing Atlantic cod (<Emphasis Type="Italic">Gadus morhua</Emphasis>) larvae

Six 3D models of the digestive system during ontogeny were reconstructed from histological sections of Atlantic cod larvae. The 3D models clearly visualize the following features: folding of the gut rotation; subdivision of digestive tract into foregut, midgut, and hindgut by sphincters; development of stomach and pyloric caeca from 39 dph; location of entrances of bile and pancreatic ducts in the medial plane of the anterior midgut; ontogeny of pancreas from a compact organ to an elongated and branched (but not diffuse) organ along the posterior midgut; one dominant islet of Langerhans until 39 dph and several smaller satellite islets also visible from 53 dph; the relatively large volume of the anterior midgut that probably increases residence time of ingested food mixing with secretions from pancreas and bile. Calculated volumes of each digestive organ demonstrate allometric changes during ontogeny. Interactive 3D models are available as QuickTime format downloadable files.     

Degradation of 2,7-dichlorodibenzo-p-dioxin by Fe(3+)-H(2)O(2) mixed reagent

Fe(3+)-H(2)O(2) mixed reagent, but not Fe(2+)-H(2)O(2), was found to be capable of degrading 2,7-dichlorodibenzo-p-dioxin (DCDD). A reaction mixture of FeCl(3) (8 mM) and H(2)O(2) (1%) caused approximately 50% degradation within 6 h and >90% degradation within 24 h at 27 degrees C. Increasing the temperature remarkably stimulated degradation: at 70 degrees C, approximately 100% degradation was achieved within 15 min. When DCDD-treated model soil (5 micrograms/g) was conducted, approximately 100% of the DCDD was degraded within 30 min at 70 degrees C (both reagents were added every 10 min). These results suggest that Fe(3+)-H(2)O(2) mixed reagent may be a new tool for combating persistent environmental pollutants such as dioxins and polychlorinated biphenyls.     

Production and characterization of KOH-activated carbon derived from polychlorinated biphenyl residue generated by the sodium dispersion process

Polychlorinated biphenyl (PCB) residues from the sodium dispersion (SD) process were employed as the raw materials for the production of activated carbon using KOH activation. The pore properties, such as the specific surface area and pore size distribution, were characterized using the Barrett–Joyner–Halenda method and the Horvath–Kawazoe method based on the N₂ adsorption isotherm at 77 K. The activated carbon produced showed similar adsorption capacities and specific surface areas to the commercially available product. The effects of the activation conditions on the porosity of the activated carbon produced were studied. The most significant factor affecting the specific surface proved to be the activation temperature. The activated carbon produced from PCB residues from the high-temperature (423–443 K) SD process had a binary pore size distribution well developed in the 4 nm region and in the micropore region. The pore structure of the carbon produced from PCB residues from the low-temperature (333–393 K) SD process had a wide range of micropores and mesopores.     

Light Stability of Oriental Lacquer Films Irradiated by a Fluorescent Lamp

Oriental lacquer film was prepared and exposed to a fluorescent lamp. The color difference and gloss of the surface of the film decreased compared to those of film kept in a dark place by irradiation with the fluorescent light. The percentage of discoloration was 7.0% on a relative scale with an irradiation of 3600 h. The surface of the film was characterized by X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy. The oxygen content of the surface increased considerably with the decrease in triene groups with exposure time. These changes were also observed when the film was exposed in a glass or acrylic plate box. The change of the above properties was not observed when the film was kept in a dark place for more than 4800 h. The results suggest that oriental lacquer film deteriorates even under irradiation with visible light.     

Influence of cetane improvers on the air quality in an urban street canyon

The concentration distributions of NO_x, PM, HC and CO in an urban street canyon have been estimated using a two-dimensional air quality numerical model based on the k– turbulent model and the atmospheric convection diffusion equation when various cetane improvers were used in diesel fuels. A wind vortex can be found within the street canyon, and the pollutants emitted from the bottom of the street canyon tend to follow the course of the wind field, moving circularly. The addition of cetane improvers can improve the air quality in a street canyon, all of the pollutants were found to decrease with increasing centane number.