Effect of long-term application of biosolids for land reclamation on surface water chemistry

Biosolids are known to have a potential to restore degraded land, but the long-term impacts of this practice on the environment, including water quality, still need to be evaluated. The surface water chemistry (NO3-, NH4+, and total P, Cd, Cu, and Hg) was monitored for 31 yr from 1972 to 2002 in a 6000-ha watershed at Fulton County, Illinois, where the Metropolitan Water Reclamation District of Greater Chicago was restoring the productivity of strip-mined land using biosolids. The mean cumulative loading rates during the past 31 yr were 875 dry Mg ha(-1) for 1120-ha fields in the biosolids-amended watershed and 4.3 dry Mg ha(-1) for the 670-ha fields in the control watershed. Biosolids were injected into mine spoil fields as liquid fertilizer from 1972 to 1985, and incorporated as dewatered cake from 1980 to 1996 and air-dried solids from 1987 to 2002. The mean annual loadings of nutrients and trace elements from biosolids in 1 ha were 735 kg N, 530 kg P, 4.5 kg Cd, 30.7 kg Cu, and 0.11 kg Hg in the fields of the biosolids-amended watershed, and negligible in the fields of the control watershed. Sampling of surface water was conducted monthly in the 1970s, and three times per year in the 1980s and 1990s. The water samples were collected from 12 reservoirs and 2 creeks receiving drainage from the fields in the control watershed, and 8 reservoirs and 4 creeks associated with the fields in the biosolids-amended watershed for the analysis of NO3- -N (including NO2- N), NH4+-N, and total P, Cd, Cu, and Hg. Compared to the control (0.18 mg L(-1)), surface water NO3- -N in the biosolids-amended watershed (2.23 mg L(-1)) was consistently higher; however, it was still below the Illinois limit of 10 mg L(-1) for public and food-processing water supplies. Biosolids applications had a significant effect on mean concentrations of ammonium N (0.11 mg L(-1) for control and 0.24 mg L(-1) for biosolids) and total P (0.10 mg L(-1) for control and 0.16 mg L(-1) for biosolids) in surface water. Application of biosolids did not increase the concentrations of Cd and Hg in surface water. The elevation of Cu in surface water with biosolids application only occurred in some years of the first decade, when land-applied sludges contained high concentrations of trace metals, including Cu. In fact, following the promulgation of 40 CFR Part 503, the concentrations of all three metals fell below the method detection level (MDL) in surface water for nearly all samplings. Nitrate in the surface water tends to be higher in spring, and ammonium, total P, and total Hg in summer and fall. Mean nitrate, ammonium, and total phosphorus concentrations were found to be greater in creeks than reservoirs. The results indicate that application of biosolids for land reclamation at high loading rates from 1972 to 2002, with adequate runoff and soil erosion control, had only a minor impact on surface water quality.     

Broadband UV spectroscopy system used for monitoring of SO2 and NO emissions from thermal power plants

A gas monitoring system based on broadband absorption spectroscopic techniques in the ultraviolet region is described and tested. The system was employed in real-time continuous concentration measurements of sulfur dioxide (SO₂) and nitric oxide (NO) from a 220-ton h^?1 circulating fluidized bed (CFB) boiler in Shandong province, China. The emission coefficients (per kg of coal and per kWh of electricity) and the total emission of the two pollutant gases were evaluated. The measurement results showed that the emission concentrations of SO₂ and NO from the CFB boiler fluctuated in the range of 750–1300 mg m^?3 and 100–220 mg m^?3, respectively. Compared with the specified emission standards of air pollutants from thermal power plants in China, the values were generally higher for SO₂ and lower for NO. The relatively high emission concentrations of SO₂ were found to mainly depend on the sulfur content of the fuel and the poor desulfurization efficiency. This study indicates that the broadband UV spectroscopy system is suitable for industrial emission monitoring and pollution control.     

Modelling pollutants dispersion and plume rise from large hydrocarbon tank fires in neutrally stratified atmosphere

Petrochemical industries normally use storage tanks containing large amounts of flammable and hazardous substances. Therefore, the occurrence of a tank fire, such as the large industrial accident on 11th December 2005 at Buncefield Oil Storage Depots, is possible and usually leads to fire and explosions. Experience has shown that the continuous production of black smoke from these fires due to the toxic gases from the combustion process, presents a potential environmental and health problem that is difficult to assess. The goals of the present effort are to estimate the height of the smoke plume, the ground-level concentrations of the toxic pollutants (smoke, SO₂, CO, PAHs, VOCs) and to characterize risk zones by comparing the ground-level concentrations with existing safety limits. For the application of the numerical procedure developed, an external floating-roof tank has been selected with dimensions of 85 m diameter and 20 m height. Results are presented and discussed. It is concluded that for all scenarios considered, the ground-level concentrations of smoke, SO₂, CO, PAHs and VOCs do not exceed the safety limit of IDLH and there are no “death zones” due to the pollutant concentrations.     

Examining the temperature dependence of ethanol (E85) versus gasoline emissions on air pollution with a largely-explicit chemical mechanism

The increased use of ethanol in transportation fuels warrants an investigation of its consequences. An important component of such an investigation is the temperature dependence of ethanol and gasoline exhaust chemistry. We use the Master Chemical Mechanism (MCM, version 3.1, LEEDS University) with the SMVGEAR II chemical ordinary differential solver to provide the speed necessary to simulate complex chemistry to examine such effects. The MCM has over 13,500 organic reactions and 4600 species. SMVGEAR II is a sparse-matrix Gear solver that reduces the computation time significantly while maintaining any specified accuracy. Although we use a box model for this study, we determine and demonstrate in a separate study that the speed of the MCM with SMVGEAR II allows the MCM to be modeled in 3-dimensions. We also verified the accuracy of the model in comparison with smog chamber data. We then use the model with species-resolved tailpipe emissions data for E85 (15% gasoline, 85% ethanol fuel blend) and gasoline vehicles to compare the impact of each on nitrogen oxides, organic gases, and ozone as a function of ambient temperature and background concentrations, using Los Angeles in 2020 as a base case. We use two different emissions sets – one is a compilation of exhaust and evaporative data taken near 24 °C and the other from exhaust data taken at ?7 °C – to determine how atmospheric chemistry and emissions are affected by temperature. We include diurnal effects by examining two day scenarios. We find that, accounting for chemistry and dilution alone, the average ozone concentrations through the range of temperatures tested are higher with E85 than with gasoline by ～7 part per billion volume (ppbv) at higher temperatures (summer conditions) to ～39 ppbv at low temperatures and low sunlight (winter conditions) for an area with a high nitrogen oxide (NOx) to non-methane organic gas (NMOG) ratio. The results suggest that E85's effect on health through ozone formation becomes increasingly more significant relative to gasoline at colder temperatures due to the change in exhaust emission composition at lower temperatures. Acetaldehyde and formaldehyde concentrations are also much higher with E85 at cold temperatures, which is a concern because both are considered to be carcinogens. These could have implications for wintertime use of E85. Peroxy acetyl nitrate (PAN), another air pollutant of concern, increases with E85 by 0.3–8 ppbv. The sensitivity of the results to box size, initial background concentrations, background emissions, and water vapor were also examined.     

Behaviour and dynamics of di-ammonium phosphate in bauxite processing residue sand in Western Australia—II. Phosphorus fractions and availability

Background, aim and scope  

Australia is the largest producer of bauxite in the world, with an annual output of approximately 62 million metric dry tons in 2007. For every tonne of alumina, about 2 tonnes of highly alkaline and highly saline bauxite-processing residue are produced. In Western Australia, Alcoa World Alumina, Australia (Alcoa) produces approximately 15 MT of residue annually from its refineries (Kwinana, Pinjarra and Wagerup). The bauxite-processing residue sand (BRS) fraction represents the primary material for rehabilitating Alcoa’s residue disposal areas (RDAs). However, the inherently hostile characteristics (high alkalinity, high salinity and poor nutrient availability) of BRS pose severe limitations for establishing sustainable plant cover systems. Alcoa currently applies 2.7 t ha⁻¹ of di-ammonium phosphate ((NH₄)₂HPO₄; DAP)-based fertiliser as a part of rehabilitation of the outer residue sand embankments of its RDAs. Limited information on the behaviour of the dominant components of this inorganic fertiliser in highly alkaline BRS is currently available, despite the known effects of pH on ammonium (NH₄) and phosphorus (P) behaviour. The aim of this study was to quantify the effects of pH on NH₃ volatilisation and residual nitrogen (N) in BRS following DAP applications.     

Residue determination and dissipation of ioxynil octanoate in maize and soil

A simple and efficient residue analysis method for direct determination of ioxynil octanoate in maize and soil was developed and validated with High Performance Liquid Chromatography-Ultra Violet (HPLC-UV). The samples were extracted with mixtures of acetonitrile and deionized water followed by Solid Phase Extraction (SPE) to remove co-extractives prior to analysis by HPLC-UV. The recoveries of ioxynil octanoate extracted from maize and soil samples ranged from 86 %-104 % and 84 %-96 %, respectively, with relative standard deviation (RSD) less than 7.84% and sensitivity of 0.01 mg kg(-1). The method was applied to determine the residue of ioxynil octanoate in maize and soil samples from experimental field. Data had shown that the dissipation rate in soil was described as pseudo-first-order kinetics and the half-life (t(1/2)) was less than 1.78 days. No ioxynil octanoate residue (<0.01 mg kg(-1)) was detected in maize at harvest time withholding period of 60 days after treatments of the pesticide. Direct confirmation of the analytes in field trial samples was realized by Liquid Chromatography-Mass Spectrometry (LC-MS).     

Experimental investigation and modelling of tritium washout by precipitation in the area of the nuclear power plant of Paks, Hungary

Tritium occurs in nature in trace amounts, but its concentration is changing due to natural and artificial sources. Studies focusing on natural tritium have to take into account the effect of artificial sources. Also, the impact of tritium is an important issue in environmental protection, e.g. in connection with the emissions from nuclear power plants. The present work focuses on the rain washout of tritium emitted from the Paks nuclear power plant in Hungary. Rainwater collectors were placed around the plant and after a period of precipitation, rainwater was collected and analysed for tritium content. Samples were analysed using low-level liquid scintillation counting, with some also subject to the more accurate ³He ingrowth method. The results clearly show the trace of the tritium plume emitted from the plant; however, values are only about one order of magnitude higher than environmental background levels. A washout model was devised to estimate the distribution of tritium around the plant. The model gives slightly higher concentrations than those measured in the field, but in general the agreement is satisfactory. The modelled values demonstrate that the effect of the plant on rainwater tritium levels is negligible over a distance of some kilometres.     

Cu fractions, mobility and bioavailability in soil-wheat system after Cu-enriched livestock manure applications

Fertilization of crops with livestock manure (LM) is a common waste disposal option, but repeated application of LM containing high concentrations of heavy metals such as Cu could lead to crop toxicity and environmental risk. To examine the Cu availability and uptake by wheat in a Mollisol affected by Cu-enriched LM, pot experiments were conducted. LM (376 mg kg⁻¹ Cu originally) was spiked with different concentrations of Cu (0, 100, 200, 400, 600 and 800 mg kg⁻¹ soil, added as CuSO₄) to simulate soil Cu contamination by LM application. The results indicated that Cu was predominately distributed in organic bound fraction, while the most drastic increase was found in reducible fraction. Acid-extractable fraction played a more important role than other fractions in controlling the mobility and bioavailability of Cu. DTPA-extractable Cu may overestimate the Cu bioavailability since DTPA solution could extract soluble and part of stable forms. The application of LM at 1% level significantly decline the Cu mobility, but that at 3% level exhibited the opposite effect.Although the quantities of Cu in wheat was very low compared with the accumulation in soil, Cu concentrations in roots increased evidently from 12 to 533 mg kg⁻¹ and that in aerial parts were in a narrow range from 12.1 to 32.7 mg kg⁻¹, indicating the more sensitivity of roots to the Cu toxicity. The Cu concentrations in grains after 3% manure application did not approach the threshold for Cu toxicity (<20 mg kg⁻¹) even at higher Cu addition rates.     

Formation of toxic species and precursors of PCDD/F in thermal decomposition of alpha-cypermethrin

This article examines the thermal decomposition of alpha-cypermethrin, one of the most common pyrethroid pesticides. The objective was to identify its decomposition pathways and to gain an understanding into the formation of toxic species in the environment, including those that may behave in combustion systems, especially in fires in the environment, as precursors for PCDD/F (polychlorinated dibenzo-p-dioxins and dibenzofurans). The experiments were conducted under non-oxidative conditions using a tubular reactor housed in a three-zone heating furnace and operated with a dilute stream of alpha-cypermethrin in 99.999% nitrogen. The condensable products were identified and quantitated, after being collected in a cold solvent trap and in an activated charcoal cartridge. The study revealed the formation of pollutants including precursors of toxic PCDD/F such as diphenyl ether and phenol. It was also found that the decomposition of alpha-cypermethrin involved parallel pathways of an unusual vinylcyclopropane rearrangement-cum-aromatisation reaction transforming alpha-cypermethrin and a rupture of the C(O)OC(CN) linkage. The former is similar to that occurring in the decomposition of permethrin pesticide, whereas the latter constitutes a newly discovered channel for the formation of pollutants. Density functional theory (DFT) calculations allowed us to attribute the occurrence of the second pathway to the effect of the cyanide group in significantly weakening the OC bond.     

Nitrogen concentrations in mosses indicate the spatial distribution of atmospheric nitrogen deposition in Europe

In 2005/6, nearly 3000 moss samples from (semi-)natural location across 16 European countries were collected for nitrogen analysis. The lowest total nitrogen concentrations in mosses (<0.8%) were observed in northern Finland and northern UK. The highest concentrations (≥1.6%) were found in parts of Belgium, France, Germany, Slovakia, Slovenia and Bulgaria. The asymptotic relationship between the nitrogen concentrations in mosses and EMEP modelled nitrogen deposition (averaged per 50 km × 50 km grid) across Europe showed less scatter when there were at least five moss sampling sites per grid. Factors potentially contributing to the scatter are discussed. In Switzerland, a strong (r² = 0.91) linear relationship was found between the total nitrogen concentration in mosses and measured site-specific bulk nitrogen deposition rates. The total nitrogen concentrations in mosses complement deposition measurements, helping to identify areas in Europe at risk from high nitrogen deposition at a high spatial resolution.