Dissociation of sulfur hexafluoride tracer gas in the presence of an indoor combustion source

As an odorless, nontoxic, and inert compound, sulfur hexafluoride (SF6) is one of the most widely used tracer gases in indoor air quality studies in both controlled and uncontrolled environments. This compound may be subject to reactions with water vapor under elevated temperature to form acidic inorganic compounds such as HF and H2SO4. Thus, in the presence of unvented combustion sources such as kerosene heaters, natural gas heaters, gas log fireplaces, candles, and lamps, the SF6 dissociation may interfere with measurements of the emissions from these sources. Tests were conducted in a research house with a vent-free natural gas heater to investigate these potential interferences. It was observed that the heater operation caused about a 5% reduction of SF6 concentration, which can be an error source for the ventilation rate measurement and consequently the estimated pollutant emission rates. Further analysis indicates that this error can be much greater than the observed 5% under certain test conditions because it is a function of the ventilation flow rate. Reducing the tracer gas concentration has no effect on this error. A simple theoretical model is proposed to estimate the magnitude of this error. The second type of interference comes from the primary and secondary products of the SF6 dissociation, mainly H2SO4, SO2, HF, and fine particulate matter (PM). In the presence of approximately 5 ppm SF6, the total airborne concentrations of these species increased by a factor of 4-10. The tests were performed at relatively high SF6 concentrations, which is necessary to determine the interferences quantitatively. The second type of interference can be significantly reduced if the SF6 concentration is kept at a low ppb level.     

Distribution of selected heavy metals and rare earth elements in surficial sediments from the polish sector of the Vistula Lagoon

The concentrations of 22 trace elements plus the rare earth elements (REE) were determined in the <63 μm fraction of surficial sediments from the Polish sector of the Vistula Lagoon by ICP-MS. For the anthropogenically-enriched elements, the mean element enrichment factors (EF's) decrease in the sequence Ag (9.9) > Sb (7.5) >As (5.8) ≥ Cd (5.2) > Pb (3.7), albeit with large variability in concentration in the sediments from one station to another. These observations demonstrate that sediments from the Vistula Lagoon are locally polluted by these anthropogenically-derived elements. Plots of NASC-normalized REE data show that the REE patterns of the sediments have not been significantly modified during transport from their source with only a minor depletion of the heavy rare earth elements (HUE) compare to the light rare earth elements (LREE). The lack of any significant anomalies for Ce and Eu indicates that redox processes have not played a major role in modifying the distribution of the REE. Factor ananalysis of the compositional data shows that sediments from the Polish sector of the Vistula Lagoon can be divided into three main groups depending on the geographical location and the degree of contamination by heavy metals.     

Biological treatment of dye wastewaters using an anaerobic-oxic system

Three dye solutions, namely, C.I. Acid Yellow 17, C.I. Basic Blue 3, and C.I. Basic Red 2, were treated in an upflow anaerobic sludge blanket (UASB) reactor followed by a semi-continuous aerobic activated sludge tank. When hydraulic retention time was about 12 hours, no significant color removal was observed in the aerobic stage. In the anaerobic stage, Acid Yellow 17, Basic Blue 3, and Basic Red 2 were removed by 20%, 72%, and 78%, respectively. To treat wastewater from a dye manufacturing factory with COD concentration of 1200 mg/l and Color of 500 degree (dilution factor), an UASB reactor (4.5 liters) and an activated sludge tank (5 liters, adjustable), COD and color were removed by more than 83% and 90% at a COD loading rate of 5.3 kg COD/m³-day in the anaerobic stage, and at the hydraulic retention time of 6-10 hours for the anaerobic stage and 6.5 for the aerobic stage. The anaerobic stage of the A/O system removes both color and COD. In addition, it also improves biodegradability of dyes for further aerobic treatment.     

In vivo chronic effect of dimethoate and deltamethrin on rabbits

The in vivo effect of dimethoate and deltamethrin on body and organ weights, serum proteins and on plasma acetylcholinesterase (AChE), aromatic esterase and ATPase were examined in growing male rabbits throughout five months period. Both compounds had no significant effect on body weight; however, adrenal, testis & pituitary weights decreased (P less than 0.01); the liver and spleen weights increased (P less than 0.01) in a dose dependent manner. Serum total proteins and globulin decreased (P less than 0.01) in a dose dependent trend, while serum albumin was not greatly affected. AChE activity was increased (P less than 0.01) after 1 month of treatment with the two doses of dimethoate and deltamethrin; thereafter, AChE activity showed 40% inhibition of the control level. The activity of aromatic esterase increased markedly after the first month, then declined gradually until the fifth month. High dose of dimethoate markedly inhibited this enzyme particularly after the 5th month of treatment. Both doses of deltamethrin increased ATPase activity after the first month of treatment, then the ATPase activity was normal. Dimethoate inhibited ATPase particularly at the end of treatment in a dose dependent manner.     

Microbial conversion of fungicide vinclozolin

An ecological safety study of using vinclozolin in field and laboratory experiments showed that the effect of the preparation led to a decrease in the abundance of actinomycetes and mycelial fungi and an enhancement of nitrification. The residual amounts of vinclozolin in soil after 12 months were 6-12% of the dose introduced. The persistent chlorinated derivatives of the toxicant were found. Microbial strains pertaining to the genera Pseudomonas and Bacillus were isolated that utilized vinclozolin as the sole source of carbon and energy.     

Experimental and numerical study of the dispersion of motor vehicle pollutants under idle condition

The aim of the work presented here is to study experimentally and numerically the dispersion characteristics of vehicular exhaust plume at an idle condition in an idealized and simplified environment. The gaseous and particulate concentrations in the exhaust plume of three idling motor vehicles were measured in an isolated environment under calm weather conditions. Despite the difference in the initial concentrations, the pollutants decayed exponentially in all directions.The CFD code PHOENICS 3.3, with the k–ε eddy dissipation sub-model, was used for the numerical simulation. The simulated results match very well with the experimental results close to the source of emission but decay to the ambient concentrations much slower. The effects of the initial emission concentration, exit velocity, exit direction and crosswind intensity have been investigated parametrically. The initial pollutant concentration will increase the local concentrations but the pattern of dispersion remains the same. The exit velocity will increase the momentum of the jet, resulting in a deeper penetration downstream. The exit angle has a stronger influence on pollutant dispersion than both initial pollutant concentration and exit velocity. When the exit angle is 15°, the pollutants tend to spread on the ground region. Crosswind shows a significant effect on the dispersion of the exhaust plume also. It will divert the plume to disperse in the same direction of the wind with limited penetration in the downstream direction.     

Study of using microfiltration and reverse osmosis membrane technologies for reclaiming cooling water in the power industry.

A study of using dual membrane technologies, microfiltration (MF) and reverse osmosis (RO), for reclaiming blowdown of the cooling tower was conducted at ZJK power plant, Hebei province, China. The study shows that the combined MF-RO system can effectively reduce water consumption in the power industry. The results indicate that MF process is capable of producing a filtrate suitable for RO treatment and achieving a silt density index (SDI) less than 2, turbidity of 0.2 NTU. The water quality of RO effluent is very good with an average conductivity of about 40 micros/cm and rejection of 98%. The product water is suitable for injection into the cooling tower to counteract with cooling water intrusion. After adopting this system, water-saving effectiveness as expressed in terms of cycles of concentration could be increased from 2.5-2.8 times to 5 times.