Broadband UV spectroscopy system used for monitoring of SO2 and NO emissions from thermal power plants

A gas monitoring system based on broadband absorption spectroscopic techniques in the ultraviolet region is described and tested. The system was employed in real-time continuous concentration measurements of sulfur dioxide (SO₂) and nitric oxide (NO) from a 220-ton h^?1 circulating fluidized bed (CFB) boiler in Shandong province, China. The emission coefficients (per kg of coal and per kWh of electricity) and the total emission of the two pollutant gases were evaluated. The measurement results showed that the emission concentrations of SO₂ and NO from the CFB boiler fluctuated in the range of 750–1300 mg m^?3 and 100–220 mg m^?3, respectively. Compared with the specified emission standards of air pollutants from thermal power plants in China, the values were generally higher for SO₂ and lower for NO. The relatively high emission concentrations of SO₂ were found to mainly depend on the sulfur content of the fuel and the poor desulfurization efficiency. This study indicates that the broadband UV spectroscopy system is suitable for industrial emission monitoring and pollution control.     

Impact of landfill liner time–temperature history on the service life of HDPE geomembranes

The observed temperatures in different landfills are used to establish a number of idealized time–temperature histories for geomembrane liners in municipal solid waste (MSW) landfills. These are then used for estimating the service life of different HDPE geomembranes. The predicted antioxidant depletion times (Stage I) are between 7 and 750 years with the large variation depending on the specific HDPE geomembrane product, exposure conditions, and most importantly, the magnitude and duration of the peak liner temperature. The higher end of the range corresponds to data from geomembranes aged in simulated landfill liner tests and a maximum liner temperature of 37 °C. The lower end of the range corresponds to a testing condition where geomembranes were immersed in a synthetic leachate and a maximum liner temperature of 60 °C. The total service life of the geomembranes was estimated to be between 20 and 3300 years depending on the time–temperature history examined. The range illustrates the important role that time–temperature history could play in terms of geomembrane service life. The need for long-term monitoring of landfill liner temperature and for geomembrane ageing studies that will provide improved data for assessing the likely long-term performance of geomembranes in MSW landfills are highlighted.     

Optimisation of MSW collection routes for minimum fuel consumption using 3D GIS modelling

Collection of municipal solid waste (MSW) may account for more than 70% of the total waste management budget, most of which is for fuel costs. It is therefore crucial to optimise the routing network used for waste collection and transportation. This paper proposes the use of geographical information systems (GIS) 3D route modelling software for waste collection and transportation, which adds one more degree of freedom to the system and allows driving routes to be optimised for minimum fuel consumption. The model takes into account the effects of road inclination and vehicle weight. It is applied to two different cases: routing waste collection vehicles in the city of Praia, the capital of Cape Verde, and routing the transport of waste from different municipalities of Santiago Island to an incineration plant. For the Praia city region, the 3D model that minimised fuel consumption yielded cost savings of 8% as compared with an approach that simply calculated the shortest 3D route. Remarkably, this was true despite the fact that the GIS-recommended fuel reduction route was actually 1.8% longer than the shortest possible travel distance. For the Santiago Island case, the difference was even more significant: a 12% fuel reduction for a similar total travel distance. These figures indicate the importance of considering both the relief of the terrain and fuel consumption in selecting a suitable cost function to optimise vehicle routing.     

Laboratory appraisal of organic carbon changes in mixtures made with different inorganic wastes

Mixtures of organic and inorganic wastes were incubated to examine the changes in organic C (OC) contents. An anaerobic sludge and a CaO-treated aerobic sludge, with OC concentrations of 235 and 129 g kg^?1, were used. The inorganic wastes used – referred to as “conditioners” – were shot blasting scrap, fettling, Linz-Donawitz slag, foundry sand (FS), and fly ash from wood bark combustion (FA). The total OC (TOC) and ${\text{KMnO}}_4^{?}$ oxidized OC were determined. DTA-TGA profiles and FTIR spectra were also obtained. Mixtures made with the FS contained significantly lower (P < 0.05) amounts of TOC (45 g kg^?1) than the rest of mixtures, which was attributed to the non-existence of reactive surfaces in the conditioner and the increased aeration induced by this material. Those made with FA contained significantly higher (P < 0.05) amounts of TOC (170 g kg^?1), which was attributed to: (i) the addition of an extra source of C – black carbon (BC) – in the FA, and (ii) the inhibition of mineralization from the compounds present in this conditioner (e.g., amorphous aluminosilicates, BC). The results highlight the importance of the characteristics of the conditioners on the fate of the OM originating from the sludges.     

Increasing extremes of heat and drought associated with recent severe wildfires in southern Greece

Mountains of the northern Mediterranean basin face two major threats under global change. Aridity and available fuel are both expected to increase because of climatic and land-use changes, increasing fire danger. There may already be signs of such effects in the case of the Pinus nigra and Abies cephalonica forests on Mt. Taygetos (southern Greece). We reconstructed climate (mid- to late-fire-season drought) using tree-rings for the last 150 years and compared it with the mountain’s fire history reconstructed from P. nigra fire scars. Seven, out of the ten, large fires Mt. Taygetos experienced were associated with below-normal precipitation (P) or above-normal maximum temperature (T _max). The largest fires occurred in late summer of 1879, 1944, 1998, and 2007. However, only the recent fires (1998 and 2007) had both low P and high T _max, also confirmed from long-term meteorological data. The synergy between climate and fuel availability may explain the very high intensity of 1998 and 2007 fires that burned mostly as stand-replacing crown fires. The other two large fire events (1879 and 1944) most likely occurred under reduced availability in burning fuel and were related to above-normal T _max. Our findings are among the first based on long-term and site-specific empirical data to support the prediction that Mediterranean mountainous areas will face a very large threat from wildfires in the twenty-first century, if socioeconomic changes leading to land abandonment and thus burning fuel accumulation are combined with the drought intensification projected for the region under global warming.     

Novel Renewable Polyols Based on Limonene for Rigid Polyurethane Foams

Novel renewable polyols based on limonene were synthesized using thiol-ene “click” chemistry. These limonene based polyols were structurally characterized using wet methods (hydroxyl number, acid value and viscosity), gel permeation chromatography and spectroscopic methods. The results indicated that high yield of polyols from limonene based materials can be obtained using thiol-ene reaction. These limonene based polyols were used successfully for preparation of rigid polyurethane foams. These foams had regular shape cells and uniform cell size distribution. Thermal studies on these foams indicated that foams were thermally stable up to 250 °C. The glass transition temperature of the foams was higher than 200 °C. These rigid polyurethane foams had high compressive strength and the highest compressive strength of 195 kPa was observed. These foams have good physical–mechanical characteristics and could be suitable for all the applications of rigid polyurethane foams such as thermal insulation of freezers, storage tanks for the chemical and food industries, and packing materials for food industries.     

Faecal pollution loads in the wastewater effluents and receiving water bodies: a potential threat to the health of Sedibeng and Soshanguve communities,South Africa

The discharge of untreated or inadequately treated effluents has been identified among the activities responsible for the spread of a wide range of potentially infectious agents. The aim of this study was to determine whether inadequate treatment of wastewater and the faecal pollution load of effluents and receiving water bodies in Sedibeng District and Soshanguve peri-urban area of the Tshwane Metropolitan Municipality could be a potential threat to the health of the surrounding communities. Variations in the counts of faecal indicator bacteria and pathogenic microorganisms and compliance of the effluents and receiving water bodies with South African and World Health Organization standards were assessed between August 2011 and May 2012 using culture-based methods and molecular techniques. The overall quality of effluents did not comply with the South African special standard of no risk for unrestricted irrigation (zero?Escherichia coli/100 ml). The quality of the receiving water bodies did not comply with South African regulatory limits set for domestic purposes (zero?E.?coli/100 ml, <30 faecal enterococci/100 ml and <1 somatic coliphages/100 ml), for full contact recreation (<20 somatic coliphages/100 ml) and aquaculture (<10?E.?coli/100 ml) and WHO standards for full and intermediate contact recreational use (<1?E.?coli/100 ml and <40 faecal enterococci/100 ml, respectively). The PCR results revealed the prevalence of pathogenic microorganisms; between 0 and 60 % of samples tested positive for Salmonella Typhimurium and Shigella dysenteriae, and between 20 and 60 % of samples tested positive for Vibrio cholerae. These findings demonstrated that potential health risks might be associated with the use of the target river waters for domestic, recreational and irrigation purposes. This study calls for a prompt intervention to improve wastewater management.     

Biochemical responses in armored catfish (Pterygoplichthys anisitsi) after short-term exposure to diesel oil,pure biodiesel and biodiesel blends

Biodiesel fuel is gradually replacing petroleum-based diesel oil use. Despite the biodiesel being considered friendlier to the environment, little is known about its effects in aquatic organisms. In this work we evaluated whether biodiesel exposure can affect oxidative stress parameters and biotransformation enzymes in armored catfish (Pterygoplichthys anisitsi, Loricariidae), a South American endemic species. Thus, fish were exposed for 2 and 7 d to 0.01 mL L⁻¹ and 0.1 mL L⁻¹ of pure diesel, pure biodiesel (B100) and blends of diesel with 5% (B5) and 20% (B20) biodiesel. Lipid peroxidation (malondialdehyde) levels and the activities of the enzymes glutathione S-transferase, superoxide dismutase, catalase and glutathione peroxidase were measured in liver and gills. Also, DNA damage (8-oxo-7, 8-dihydro-2′-deoxyguanosine) levels in gills and 7-ethoxyresorufin-O-deethylase activity in liver were assessed. Pure diesel, B5 and B20 blends changed most of the enzymes tested and in some cases, B5 and B20 induced a higher enzyme activity than pure diesel. Antioxidant system activation in P. anisitsi was effective to counteract reactive oxygen species effects, since DNA damage and lipid peroxidation levels were maintained at basal levels after all treatments. However, fish gills exposed to B20 and B100 presented increased lipid peroxidation. Despite biodiesel being more biodegradable fuel that emits less greenhouse gases, the increased lipid peroxidation showed that biofuel and its blends also represent hazards to aquatic biota.     

Tylosin Sorption to Silty Clay Loam Soils,Swine Manure,and Sand

The objectives of this study were to assess sorption and desorption of tylosin, a macrolide antimicrobial chemical used in swine, cattle, and poultry production, in three silty clay loam soils of South Dakota and compare soil sorption to sand and manure sorption. The silty clay loam soils, from a toposequence in eastern South Dakota, standardized sand samples, and swine manure were used in 24-h batch sorption studies with tylosin concentrations ranging from 25 to 232 μ mole/L. Desorption from soil was conducted over a four-day period. Partition coefficients, based on the Freundlich isotherm (K _f ) or K _d values, were calculated. K _f values for the silty clay loams were similar, not influenced by landscape position, and averaged 1350 with isotherm slopes ranging from 0.85 to 0.93. K _f values for sand were dependent on solution/sand ratios and pH, ranging from 1.4 to 25.1. K _d values of manure were dependent on the solution type and ranged from 840 L/kg with urine to about 175 L/kg when sorbed from water. Desorption of tylosin from each soil over the four-day period was < 0.2% of the amount added. The soils' high K _f values and low desorption amounts suggest that once tylosin is in these soils, leaching to lower depths may not occur. However, this does not preclude runoff with soil eroded particles. If tylosin reaches a sand aquifer, through bypass flow or other mechanism(s), movement in the aquifer most likely would occur.     

Population development of the invader ctenophore Mnemiopsis leidyi, in the Black Sea and in other seas of the Mediterranean basin

In the last two decades of the twentieth century, the ctenophore Mnemiopsis leidyi (A. Agassiz) has invaded the Black, Azov, Marmara and Aegean Seas, and, recently, the Caspian Sea. Here, we compare its spatial and temporal distribution, seasonal dynamics and the time and duration of reproduction. We also discuss factors that control its abundance throughout its invasive range and its effect on ecosystems. Observations are based on the long-term field data collected by three research institutes. An analysis of the effects of temperature, salinity, prey (zoo- and ichthyoplankton) availability and predation (by ctenophores of the genus Beroe) on M. leidyi population size, and the effects of M. leidyi on zoo- and ichthyoplankton, and on fish populations in the Black and Azov Seas is also provided. With the Black Sea current, M. leidyi spreads to the upper layers of the Sea of Marmara, where it now occurs around the year. At regular intervals, the Black Sea current also takes it to the northern Aegean Sea. In contrast, it has to re-invade the Sea of Azov every spring or summer, dying out during winter when the temperature drops below 4°C. The warm summer and mild winter temperatures, relatively low salinity and abundance of prey in the Black Sea are close to optimal for M. leidyi, while they are suboptimal in the northern Aegean Sea, where salinity and temperature are often too high. In the Black Sea the absence of gelatinous and other predators led to an enormous ctenophore abundance for a decade, but with the appearance of Beroe ovata in 1999, M. leidyi abundance greatly decreased. Analysis of seasonal dynamics of M. leidyi in the Black Sea and in other seas of the Mediterranean basin indicates similarities in the timing of maximum abundance and biomass, in spite of some differences in the initiation and duration of reproduction. A peak biomass and density occurred in 1989 in the Black and Azov Seas and in 1990 in the other seas. The M. leidyi invasion negatively affected the ecosystems of the Black Sea and the Sea of Azov. The zooplankton, ichthyoplankton and zooplanktivorous fish stocks all underwent profound changes. Similar effects, but less pronounced, were recorded in the Sea of Marmara. Effects on Mediterranean food chains have, so far, remained insignificant. Salinity is probably supraoptimal here, and several predators prevent M. leidyi from reaching outbreak levels.