Organochlorine pesticides and polychlorinated biphenyls in soils surrounding the Tanggu Chemical Industrial District of Tianjin, China

The spatial distribution of persistent organic pollutants (POPs) was examined in soils surrounding the Tanggu Chemical Industrial District in Tianjin, China. The concentrations of hexachlorocyclohexanes (HCHs), dichlorodiphenyltrichloroethanes (DDTs), hexachlorobenzenes (HCBs), and polychlorinated biphenyls (PCBs) were determined in 70 surface soils using accelerated solvent extraction and gas chromatography with electron capture detection. The results showed that the ranges of ∑HCH, ∑DDT, ΣHCB, and ∑PCB concentrations in soils were 2.1–12,549 μg?kg^?1 (average, 965 μg?kg^?1), n.d.–2,033 μg?kg^?1 (average, 88.4 μg?kg^?1), n.d.–1,924 μg?kg^?1 (average, 349 μg?kg^?1), and n.d.–373 μg?kg^?1 (average, 46.2 μg?kg^?1), respectively. Of these, HCHs were the dominant POPs, accounting for 75 % of the total organochlorine pesticide (OCP) residues. Overall, the spatial distribution of OCP concentrations showed a decreasing trend from the center of the Tanggu District to the surrounding areas. Two major pollution sources were Tianjin Dagu Chemical Co., Ltd. in the district center and the Tianjin Chemical Plant in Hangu District. In contrast, PCB concentrations were relatively high in the Haihe estuary to the east and low to the west of the study area. Component analysis of OCPs in these soils showed that they mainly came from industrial point sources. Compared with soils in other regions, soil DDT pollution was at a medium level in the Tanggu Chemical Industrial District, but associated HCH, HCB, and PCB pollution was relatively heavy. By multivariate statistical analyses, Tianjin Dagu Chemical Co., Ltd. was recognized as the main source of POPs, and soil properties were clarified to play an important role on the distribution and composition of POPs, especially the organic carbon content.     

Transition metal-modified zinc oxides for UV and visible light photocatalysis

In order to use photocatalysis with solar light, finding more active and especially visible light active photocatalysts is a very important challenge. Also, studies of these photocatalysts should employ a standardized test procedure so that their results can be accurately compared and evaluated with one another. A systematic study of transition metal-modified zinc oxide was conducted to determine whether they are suitable as visible light photocatalysts. The photocatalytic activity of ZnO modified with eight different transition metals (Cu, Co, Fe, Mn, Ni, Ru, Ti, Zr) in three different concentrations (0.01, 0.1, and 1?at.%) was investigated under irradiation with UV as well as with visible light. The employed activity test is the gas-phase degradation of acetaldehyde as described by the ISO standard 22197-2. The results suggest that the UV activity can be improved with almost any modification element and that there exists an optimal modification ratio at about 0.1?at.%. Additionally, Mn- and Ru-modified ZnO display visible light activity. Especially the Ru-modified ZnO is highly active and surpasses the visible light activity of all studied titania standards. These findings suggest that modified zinc oxides may be a viable alternative to titanium dioxide-based catalysts for visible light photocatalysis. Eventually, possible underlying mechanisms are proposed and discussed.     

Nitrogen concentrations in mosses indicate the spatial distribution of atmospheric nitrogen deposition in Europe

In 2005/6, nearly 3000 moss samples from (semi-)natural location across 16 European countries were collected for nitrogen analysis. The lowest total nitrogen concentrations in mosses (<0.8%) were observed in northern Finland and northern UK. The highest concentrations (≥1.6%) were found in parts of Belgium, France, Germany, Slovakia, Slovenia and Bulgaria. The asymptotic relationship between the nitrogen concentrations in mosses and EMEP modelled nitrogen deposition (averaged per 50 km × 50 km grid) across Europe showed less scatter when there were at least five moss sampling sites per grid. Factors potentially contributing to the scatter are discussed. In Switzerland, a strong (r² = 0.91) linear relationship was found between the total nitrogen concentration in mosses and measured site-specific bulk nitrogen deposition rates. The total nitrogen concentrations in mosses complement deposition measurements, helping to identify areas in Europe at risk from high nitrogen deposition at a high spatial resolution.     

Analysis of surface and aerosol polarized reflectance for aerosol retrievals from polarized remote sensing in PRD urban region

A precise estimate of polarization induced by surface is crucial for polarized remote sensing dedicated to monitoring aerosol properties over urban area. The accurate knowledge of interaction between surface and aerosol polarized reflectance is essential for accurately achieving aerosol properties. In order to study surface and aerosol polarized reflectance for aerosol retrievals over urban area, a new airborne directional polarimetric camera (DPC) with high spatial resolution (4 m at 4000 m a.g.l) was developed. The surface polarized reflectance over distinct surface covers of urban area (forest, shrub, and soil) were studied using DPC measurements during a field campaign in the Pearl River Delta (PRD), China. The large variations were found in surface polarized reflectance of distinct urban covers due to surface type variability. For all surface types, the empirical BPDF model cannot describe accurately surface polarized reflectance at all possible illumination and observation geometries. From the quantitatively study of relationship between surface and aerosol polarized contribution to DPC measurements, we show that the polarized contributions of aerosol, which optical properties were defined by ground-based measurements, are much larger than the polarized contribution of surface, and found that the polarized contribution of surface covers increases with decreasing NDVI. The effect of polarization accuracy of measurements on aerosol retrieval was also investigated using DPC measurements, and found that 0.1% polarization accuracy of measurements can be neglected when AOD is retrieved using polarized measurements. Based on the information of effects of polarized reflectance differences between distinct surface covers and polarization accuracy of polarized measurements on retrieved aerosols over urban area, we found that the accuracy of aerosol retrieval over forest covers is higher than other surface types using polarized remote sensing.     

Cu fractions, mobility and bioavailability in soil-wheat system after Cu-enriched livestock manure applications

Fertilization of crops with livestock manure (LM) is a common waste disposal option, but repeated application of LM containing high concentrations of heavy metals such as Cu could lead to crop toxicity and environmental risk. To examine the Cu availability and uptake by wheat in a Mollisol affected by Cu-enriched LM, pot experiments were conducted. LM (376 mg kg⁻¹ Cu originally) was spiked with different concentrations of Cu (0, 100, 200, 400, 600 and 800 mg kg⁻¹ soil, added as CuSO₄) to simulate soil Cu contamination by LM application. The results indicated that Cu was predominately distributed in organic bound fraction, while the most drastic increase was found in reducible fraction. Acid-extractable fraction played a more important role than other fractions in controlling the mobility and bioavailability of Cu. DTPA-extractable Cu may overestimate the Cu bioavailability since DTPA solution could extract soluble and part of stable forms. The application of LM at 1% level significantly decline the Cu mobility, but that at 3% level exhibited the opposite effect.Although the quantities of Cu in wheat was very low compared with the accumulation in soil, Cu concentrations in roots increased evidently from 12 to 533 mg kg⁻¹ and that in aerial parts were in a narrow range from 12.1 to 32.7 mg kg⁻¹, indicating the more sensitivity of roots to the Cu toxicity. The Cu concentrations in grains after 3% manure application did not approach the threshold for Cu toxicity (<20 mg kg⁻¹) even at higher Cu addition rates.     

Experimental investigation and modelling of tritium washout by precipitation in the area of the nuclear power plant of Paks, Hungary

Tritium occurs in nature in trace amounts, but its concentration is changing due to natural and artificial sources. Studies focusing on natural tritium have to take into account the effect of artificial sources. Also, the impact of tritium is an important issue in environmental protection, e.g. in connection with the emissions from nuclear power plants. The present work focuses on the rain washout of tritium emitted from the Paks nuclear power plant in Hungary. Rainwater collectors were placed around the plant and after a period of precipitation, rainwater was collected and analysed for tritium content. Samples were analysed using low-level liquid scintillation counting, with some also subject to the more accurate ³He ingrowth method. The results clearly show the trace of the tritium plume emitted from the plant; however, values are only about one order of magnitude higher than environmental background levels. A washout model was devised to estimate the distribution of tritium around the plant. The model gives slightly higher concentrations than those measured in the field, but in general the agreement is satisfactory. The modelled values demonstrate that the effect of the plant on rainwater tritium levels is negligible over a distance of some kilometres.     

Formation of toxic species and precursors of PCDD/F in thermal decomposition of alpha-cypermethrin

This article examines the thermal decomposition of alpha-cypermethrin, one of the most common pyrethroid pesticides. The objective was to identify its decomposition pathways and to gain an understanding into the formation of toxic species in the environment, including those that may behave in combustion systems, especially in fires in the environment, as precursors for PCDD/F (polychlorinated dibenzo-p-dioxins and dibenzofurans). The experiments were conducted under non-oxidative conditions using a tubular reactor housed in a three-zone heating furnace and operated with a dilute stream of alpha-cypermethrin in 99.999% nitrogen. The condensable products were identified and quantitated, after being collected in a cold solvent trap and in an activated charcoal cartridge. The study revealed the formation of pollutants including precursors of toxic PCDD/F such as diphenyl ether and phenol. It was also found that the decomposition of alpha-cypermethrin involved parallel pathways of an unusual vinylcyclopropane rearrangement-cum-aromatisation reaction transforming alpha-cypermethrin and a rupture of the C(O)OC(CN) linkage. The former is similar to that occurring in the decomposition of permethrin pesticide, whereas the latter constitutes a newly discovered channel for the formation of pollutants. Density functional theory (DFT) calculations allowed us to attribute the occurrence of the second pathway to the effect of the cyanide group in significantly weakening the OC bond.     

Behaviour and dynamics of di-ammonium phosphate in bauxite processing residue sand in Western Australia—II. Phosphorus fractions and availability

Background, aim and scope  

Australia is the largest producer of bauxite in the world, with an annual output of approximately 62 million metric dry tons in 2007. For every tonne of alumina, about 2 tonnes of highly alkaline and highly saline bauxite-processing residue are produced. In Western Australia, Alcoa World Alumina, Australia (Alcoa) produces approximately 15 MT of residue annually from its refineries (Kwinana, Pinjarra and Wagerup). The bauxite-processing residue sand (BRS) fraction represents the primary material for rehabilitating Alcoa’s residue disposal areas (RDAs). However, the inherently hostile characteristics (high alkalinity, high salinity and poor nutrient availability) of BRS pose severe limitations for establishing sustainable plant cover systems. Alcoa currently applies 2.7 t ha⁻¹ of di-ammonium phosphate ((NH₄)₂HPO₄; DAP)-based fertiliser as a part of rehabilitation of the outer residue sand embankments of its RDAs. Limited information on the behaviour of the dominant components of this inorganic fertiliser in highly alkaline BRS is currently available, despite the known effects of pH on ammonium (NH₄) and phosphorus (P) behaviour. The aim of this study was to quantify the effects of pH on NH₃ volatilisation and residual nitrogen (N) in BRS following DAP applications.     

Modelling pollutants dispersion and plume rise from large hydrocarbon tank fires in neutrally stratified atmosphere

Petrochemical industries normally use storage tanks containing large amounts of flammable and hazardous substances. Therefore, the occurrence of a tank fire, such as the large industrial accident on 11th December 2005 at Buncefield Oil Storage Depots, is possible and usually leads to fire and explosions. Experience has shown that the continuous production of black smoke from these fires due to the toxic gases from the combustion process, presents a potential environmental and health problem that is difficult to assess. The goals of the present effort are to estimate the height of the smoke plume, the ground-level concentrations of the toxic pollutants (smoke, SO₂, CO, PAHs, VOCs) and to characterize risk zones by comparing the ground-level concentrations with existing safety limits. For the application of the numerical procedure developed, an external floating-roof tank has been selected with dimensions of 85 m diameter and 20 m height. Results are presented and discussed. It is concluded that for all scenarios considered, the ground-level concentrations of smoke, SO₂, CO, PAHs and VOCs do not exceed the safety limit of IDLH and there are no “death zones” due to the pollutant concentrations.