炉底渣磨细优化其品质的试验

以浙江长兴电厂所排的炉底渣为例,通过磨细将其加工成相当于国标Ⅱ级粉煤灰的产品。试验结果表明:长兴电厂炉底渣的化学成分以SiO2与Al2O3较高为特征,物相以玻璃体占绝对优势,微量元素和放射性元素含量均在国标规定的安全范围内;磨细炉底渣的45μm筛余量控制在10%左右时其品质为最优;磨细炉底渣的火山灰活性要优于磨细Ⅱ级粉煤灰的。     

Pretreatment of cyanided tailings by catalytic ozonation with Mn2+/O3

The increasing amount of cyanided tailings produced as a by-product has gained significant attention in recent years because of the rapid development of the gold industry and extensive exploitation of gold mineral resources. The effective use of these secondary resources is becoming an important and urgent problem for all environmental protection staff. Manganese-catalyzed ozonation for the pre-oxidation of cyanided tailings was studied and the effects of Mn²⁺ dosage, initial sulfuric acid concentration, ozone volume flow, temperature and agitation speed on pretreatment were examined. The optimum reaction conditions were observed to be: ore pulp density 2.5%, agitation speed 700 r/min, temperature 60 ℃, Mn²⁺ dosage 40 g/L, ozone volume flow 80 L/hr, initial sulfuric acid concentration 1 mol/L, and reaction time 6 hr. Under these conditions, the leaching rate of Fe and weight loss could reach 94.85% and 48.89% respectively. The leaching process of cyanided tailings by Mn²⁺/O³ was analyzed, and it was found that the leaching of pyrite depends on synergetic oxidation by high-valent manganese and O³, in which the former played an important part.     

多元素分析器分析砷遇到的问题与方法改进

依据新银盐分光光度法的基本原理,使用多元素分析器准确测定水体中砷的含量会遇到一些问题,如砷标准使用液浓度,吸收液配制,U型管DMF混合液加入量,脱脂棉装入U型管松紧程度,反应水样酸度,反应/吸收装置的致密性和一致性以及使用玻璃器皿的洗涤等,如果这些操作步骤不当都会给测定结果带来一定的误差,为了尽量减少这些误差,分析者对该项目测定方法作了一些探讨和改进,收到了良好的成效.     

Association of emergency room visits for respiratory diseases with sources of ambient PM2.5

Previous studies have reported associations of short-term exposure to different sources of ambient fine particulate matter(PM_(2.5)) and increased mortality or hospitalizations for respiratory diseases. Few studies, however, have focused on the short-term effects of source-specific PM_(2.5) on emergency room visits(ERVs) of respiratory diseases. Source apportionment for PM_(2.5) was performed with Positive Matrix Factorization(PMF) and generalized additive model was applied to estimate associations between source-specific PM_(2.5) and respiratory disease ERVs. The association of PM_(2.5) and total respiratory ERVs was found on lag4(RR = 1.011, 95%CI: 1.002, 1.020) per interquartile range(76 μg/m~3) increase.We found PM_(2.5) to be significantly associated with asthma, bronchitis and chronic obstructive pulmonary disease(COPD) ERVs, with the strongest effects on lag5(RR = 1.072,95%CI: 1.024, 1.119), lag4(RR = 1.104, 95%CI: 1.032, 1.176) and lag3(RR = 1.091, 95%CI: 1.047,1.135), respectively. The estimated effects of PM_(2.5) changed little after adjusting for different air pollutants. Six primary PM_(2.5) sources were identified using PMF analysis, including dust/soil(6.7%), industry emission(4.5%), secondary aerosols(30.3%), metal processing(3.2%),coal combustion(37.5%) and traffic-related source(17.8%). Some of the sources were identified to have effects on ERVs of total respiratory diseases(dust/soil, secondary aerosols, metal processing, coal combustion and traffic-related source), bronchitis ERVs(dust/soil) and COPD ERVs(traffic-related source, industry emission and secondary aerosols). Different sources of PM_(2.5) contribute to increased risk of respiratory ERVs to different extents, which may provide potential implications for the decision making of air quality related policies, rational emission control and public health welfare.     

Enhanced ozonation of dichloroacetic acid in aqueous solution using nanometer ZnO powders

Nanometer zinc oxide (ZnO) powders were used as a catalyst to enhance the ozonation for the degradation of dichloroacetic acid (DCAA) in aqueous solution. The batch experiments were carried out to investigate the e ects of key factors such as catalyst dosage, ozone dosage, solution pH and tert-butyl alcohol (t-BuOH) on the degradation e ciency of DCAA. Density functional theory (DFT) was adopted to explore the mechanism of generating hydroxyl radical (.OH) on the ZnO surface. The results showed that adsorption and ozonation processes were not e ective for DCAA removal, and the addition of ZnO catalyst improved the degradation e ciency of DCAA during ozonation, which caused an increase of 22.8% for DCAA decomposition compared to the case of ozonation alone after 25 min. Under the same experimental conditions, the DCAA decomposition was enhanced by increasing catalyst dosage from 100 to 500 mg/L and ozone dosage from 0.83 to 3.2 mg/L. The catalytic ozonation process is more pronounced than the ozonation process alone at pH 3.93, 6.88, and 10. With increasing the concentration of t-BuOH from 10 to 200 mg/L, the degradation of DCAA was significantly inhibited in the process of catalytic ozonation, indicating that ZnO catalytic ozonation followed .OH reaction mechanism. Based on the experimental results and DFT analysis, it is deduced that the generation of .OH on the ZnO surface is ascribed to the adsorption of molecule ozone followed by the interaction of adsorbed ozone with active sites of the catalyst surface. It is also concluded that ZnO may be an e ective catalyst for DCAA removal, which could promote the formation of .OH derived from the catalytic decomposition of ozone.     

多轴差分吸收光谱仪对大气污染物SO2、NO2、O3的立体监测

多轴差分吸收光谱仪（MAX—DOAS）是用来监测大气中痕量气体成分的专用仪器,它能同时自动监测SO2、NO2和03三种污染气体,得到的垂直柱浓度对研究污染物的时空分布特点具有重要意义。分析了2011年5月下旬至2012年4月中旬期间MAX—DOAS在重庆市的测量数据,结果表明：夏季SO2的柱浓度高于其它季节,并在每个季节都出现了峰值：SO2与NO2之间浓度变化趋势相同,且最大小时浓度值都集中在上午;O3垂直柱浓度受气象条件和臭氧前体物的影响呈夏季高、秋冬低的季节性变化;通过多元回归建立了O3柱浓度与气象因素、前体物的关系式。     

危险化学品活性反应危害及混配危险的规则研究（XIII）

非金属氢化物具有EHn活性基刚，大多数挥发性氢化物的最低爆炸氰浓度几乎是零。因此，在处理非金属氢化物时，全部除掉空气或氧气对安全操作是重要的。在氢化混合物中有杂质时会更进一步增加着火的危险。值得强调的是：硫化氢不仅与空气混合能形成爆炸性混合物，而遇明火、高热且能引起燃烧或爆炸。     

内置渗透墙型生态塘处理农村生活污水的研究

通过在传统的生态塘中增设了一道活性渗透墙而改造成的内置渗透墙型生态塘。结果表明,内置渗透墙型生态塘对生活污水具有良好的处理效果,在水力负荷为0．05～0．1m^3／m^2·d之间时,即水力停留时间在10d～20d时,它对COD的去除率在60％以上,对TN的去除率在50％以上,对TP的去除率在75％以上。大大减轻了后序工艺的负担,减少了后序处理设施。从而缩小了整个生态塘系统的占地面积,节省了基建投资,是一种高效的适合农村生活污水处理的技术。     

Effect of pyrolysis temperature and hold time on the characteristic parameters of adsorbent derived from sewage sludge

According to the Doehlert‘s matrix method, the adsorbent derived from sewage sludge was prepared through chemical activation under controlling the pyrolysis temperature and hold time. The characteristic parameters including the total yield, adsorption of methylene blue, adsorption of iodine, BET surface area, micro-pore volume are 35%-49%, ]6..5--38 mg/g, 28.5--362 mg/g, 18.5--359 m^2/g, and 0.112--0.224 m^3/g, respectively. According to the experimental data, the multi-linear regression method was adopted to fit the relations between the characteristic parameters and influential factors. At final, through optimization method, the optimal adsorbent is obtained when using 62 min as hold time and 1105K as pyrolysis temperature. Under the conditions, the adsorbent was produced and compared the characteristic parameters with model forecast value, the coherence is satisfied.     

南方红壤地区水稻土的肥力评价

本文在系统分析土壤肥力结构的基础上，运用模糊隶属函数及主成分分析的原理和方法生成了反映水稻土肥力状况的综合肥力指数（ＩＦＩ），以此对江西省临川县４３个水稻土种（属）的肥力状况进行了分析与评价，划分了水稻土的肥力等级，并考察了不同肥力级别水稻土各肥力指标的状况。