Application of interface material and effects of oxygen gradient on the performance of single-chamber sediment microbial fuel cells (SSMFCs)

Single-chamber sediment microbial fuel cells(SSMFCs) have received considerable attention nowadays because of their unique dual-functionality of power generation and enhancement of wastewater treatment performance. Thus, scaling up or upgrading SSMFCs for enhanced and efficient performance is a highly crucial task. Therefore, in order to achieve this goal, an innovative physical technique of using interface layers with four different pore sizes embedded in the middle of SSMFCs was utilized in this study.Experimental results showed that the performance of SSMFCs employing an interface layer was improved regardless of the pore size of the interface material, compared to those without such layers. The use of an interface layer resulted in a positive and significant effect on the performance of SSMFCs because of the effective prevention of oxygen diffusion from the cathode to the anode. Nevertheless, when a smaller pore size interface was utilized, better power performance and COD degradation were observed. A maximum power density of 0.032 mW/m~2 and COD degradation of 47.3% were obtained in the case of an interface pore size of 0.28 μm. The findings in this study are of significance to promote the future practical application of SSMFCs in wastewater treatment plants.     

One-step synthesis of Cu(II) metal–organic gel as recyclable material for rapid, efficient and size selective cationic dyes adsorption

Efficient removal of non-biodegradable and hazardous dyes from wastewater remains a hot research topic. Herein, a rationally designed a Cu(Ⅱ)-based metal–organic gel(Cu-MOG) with a nanoporous 3 D network structure prepared via a simple one-step mixing method was successfully employed for the removal of cationic dyes. The Cu-MOG exhibited high efficiency, with an adsorption capacity of up to 650.32 mg/g, and rapid adsorption efficiency, with the ability to adsorb 80% of Neutral Red within 1 min. The high adsorption efficiency was attributed to its large specific surface area, which enabled it to massively bind cationic dyes through electrostatic interaction, and a nanoporous structure that promoted intra-pore diffusion. Remarkably, the Cu-MOG displayed size-selective adsorption, based on adsorption studies concerning dyes of different sizes as calculated by density functional theory. Additionally, the adsorption performance of the Cu-MOG still maintained removal efficiency of 100% after three regeneration cycles. These results suggested that the Cu-MOG could be expected to be a promising and competitive candidate to conveniently process wastewater.     

长期施肥下水稻根际和非根际土壤微生物碳源利用特征

以红壤丘陵区典型稻田长期定位施肥试验土壤为研究对象,选取不施肥(CK)、化肥(NPK)、秸秆还田+化肥(NPKS)、30%有机肥+化肥(LOM)和60%有机肥+化肥(HOM)这5种处理,研究长期不同施肥条件下水稻根际和非根际土壤微生物碳源利用特征.基于~(18)O-H_2O示踪的结果表明,土壤微生物量碳(MBC)和微生物生长速率(CGrowth)均以HOM处理最高,CK处理最低.根际土中,土壤微生物基础呼吸速率以HOM最高,CK和NPK最低;微生物碳源利用效率(CUE)以NPK最高,LOM和HOM最低.非根际土中,不同施肥处理的基础呼吸速率和CUE均无显著差异. MicroResp~(TM)结果显示,非根际土中微生物对外源碳源代谢能力高于根际土.施用有机物料(秸秆或有机肥)均能提高微生物对羧酸类、氨基酸、碳水化合物的代谢速率,且土壤微生物利用羧酸类碳源的活性最高,其次为氨基酸类和碳水化合物类碳源,对复杂化合物的代谢速率较低. RDA分析表明,微生物对不同碳源代谢情况的聚类总体以根际土与非根际土分开,CK与施肥处理分开,且NPK与NPKS相对聚集,LOM与HOM相对聚集,NPK、NPKS与LOM、HOM分开,即不同施肥处理显著改变土壤微生物对外源碳源代谢特征.结果表明,施肥未改变微生物CUE和基础呼吸速率,但有外源碳源输入(如根系分泌物)的情况下,施用有机物料增加基础呼吸、降低CUE.     

不同类型秸秆对污泥厌氧消化特性及细菌群落结构的影响

为促进污水处理厂污泥及农作物秸秆的资源化利用,探讨不同类型秸秆（玉米、小麦、水稻）对污泥厌氧消化特性、产气效果及细菌群落结构的影响,在中温〔（35±1）℃〕下,研究了污泥与秸秆按不同质量比（1:0、1:0.5、1:1、1:1.5）联合厌氧消化对污泥C/N（碳氮比）和厌氧消化环境中pH、ρ（NH₄+-N）、ρ（VFAs）（VFAs为挥发性脂肪酸）、日均沼气产量及φ（CH₄）、细菌群落的特征变化,以未添加秸秆的污泥厌氧消化为CK（对照）.结果表明:不同类型秸秆的添加对厌氧消化体系的pH、ρ（NH₄+-N）、ρ（VFAs）均产生显著影响,秸秆的加入明显提高了厌氧消化体系的产气量.联合厌氧消化可通过优化厌氧消化底物的C/N,从而增加ρ（VFAs）和φ（CH₄）.其中,污泥与玉米秸秆质量比为1:1.5时对厌氧消化的促进作用最为显著;其沼气日产量为2 303.08 mL,比CK（536.15 mL）提高了3倍以上,而沼气中φ（CH₄）最高为54.49%,比CK（37.07%）提高46.99%.此外,不同类型秸秆的添加也可通过改变细菌群落结构从而促进秸秆降解,增加ρ（VFAs）和提高沼气产量,特别是添加秸秆后,Bacteroidetes会逐渐取代Proteobacteria成为主要的产酸菌种,从而导致ρ（VFAs）增加.研究显示,污泥与秸秆联合厌氧消化可改善污泥营养结构,改变细菌群落结构,提高沼气产量.      

Simultaneous quantification of fifty-one odor-causing compounds in drinking water using gas chromatography-triple quadrupole tandem mass spectrometry

A wide range of compounds with various structural features can cause taste and odor(TO)problems in drinking water. It would be desirable to determine all of these compounds using a simple analytical method. In this paper, a sensitive method combining liquid–liquid extraction(LLE) with gas chromatography-triple quadrupole tandem mass spectrometry(GC–MS/MS)was established to simultaneously analyze 51 odor-causing compounds in drinking water,including organic sulfides, aldehydes, benzenes, phenols, ethers, esters, ketones, nitrogenous heterocyclic compounds, 2-methylisoborneol and geosmin. Three deuterated analogs of target analytes, dimethyl disulfide-d6, benzaldehyde-d6 and o-cresol-3,4,5,6-d4,were used to correct the variations in recovery, and five isotope-labeled internal standards(4-chlorotoluene-d4, 1, 4-dichlorobenzene-d4, naphthalene-d8, acenaphthene-d10, phenanthrene-d10 respectively) were used prior to analysis to correct the variations arising from instrument fluctuations and injection errors. The calibration curves of the target compounds showed good linearity(R2 0.99, level = 7),and method detection limits(MDLs) below 1/10 of the odor threshold concentrations were achieved for most of the odorants(0.10–20.55 ng/L). The average recoveries of most of the analytes in tap water samples were between 70% and 120%, and the method was reproducible(RSD 20%, n = 7). Additionally, concentrations of odor-causing compounds in water samples collected from three drinking water treatment plants(DWTPs) were analyzed by this method.According to the results, dimethyl trisulfide, dimethyl disulfide and indole were considered to be the key odorants responsible for the swampy/septic odor. 2-Methylisoborneol and geosmin were detected as the main odor-causing compounds for musty/earthy odor in DWTP B.     

广西内河及沿海船舶大气污染物排放清单及特征研究

基于广西船舶数量及类型、船舶引擎功率等数据,以广西壮族自治区为例,通过船舶引擎功率法建立广西2020年内河及沿海船舶排放清单,探究广西内河及沿海船舶主要大气污染排放量时空分布,并通过大气扩散模型模拟了船舶大气污染物排放对广西沿海港区大气环境的影响。结果表明：内河船舶中干货船排放占比为35.6%,四等船排放占比为26.07%;沿海船舶中拖船排放占比为44.16%~49.33%,主机、辅机、锅炉排放占比分别为52.39%、21.43%、26.18%;不同工况下,沿海船舶停泊工况SO₂排放占比最高,其余污染物在慢速行驶工况下排放占比最高。2020年广西北部湾海域船舶SO₂、NO_x、HC、CO₂的平均排放强度分别为0.32、2.14、0.07、121.93 t/km²。

     

Decomplexation of Cu-1-hydroxyethylidene-1,1-diphosphonic acid by a three-dimensional electrolysis system with activated biochar as particle electrodes

The feasibility of decomplexation removal of typical contaminants in electroplating wastewater, complexed Cu(II) with 1-hydroxyethylidene-1,1-diphosphonic acid (Cu-HEDP), was first performed by a three-dimensional electric reactor with activated biochar as particle electrodes. For the case of 50 mg/L Cu-HEDP, Cu(II) removal (90.7%) and PO initial pH 7, acid-treated almond shell biochar (AASB) addition 20 g/L, and reaction time 180 min, with second-order rate constants of 1.10 × 10⁻³ and 1.94 × 10⁻⁵ min⁻¹respectively. The growing chelating effect between Cu(II) and HEDP and the comprehensive actions of adsorptive accumulation, direct and indirect oxidation given by particle electrodes accounted for the enhanced removal of Cu-HEDP, even though the mineralization of HEDP was mainly dependent on anode oxidation. The performance attenuation of AASB particle electrodes was ascribed to the excessive consumption of oxygen-containing functionalities during the reaction, especially acidic carboxylic groups and quinones on particle electrodes, which decreased from 446.74 to 291.48 µmol/g, and 377.55 to 247.71 µmol/g, respectively. Based on the determination of adsorption behavior and indirect electrochemical oxidation mediated by in situ electrogenerated H₂O₂ and reactive oxygen species (e.g., •OH), a possible removal mechanism of Cu-HEDP by three-dimensional electrolysis was further proposed.     

废水中氰化物氧化水解反应研究

本文研究含氰废水在常压回流条件下的氧化水解反应,以氰化钾溶液试验,证明氰化物在常压回流条件下的氧化水解反应符合一级反应动力学规律,进而测定了不同pH下氰化钾溶液及含氰造气废水氧化水解反应的速率常数。在不同铁氰比条件下,对氰化物氧化水解反应进行了理论分析和实际试验,证明在一定量亚铁离子存在下,可通过控制适当的处理液pH来提高氰化物氧化水解反应速度,也可按原来的pH,用调节亚铁离子浓度的方法来提高氰化物的氧化水解反应速度,从而为提高含氰造气废水处理效率提供了新的途径和理论依据。     

地质样品中27项元素的粉末压片法x射线荧光光谱测定

本文报导了用x射线荧光光谱法—次粉末压片制样同时测定Na. Mg. Al. Si.P. S. K. Ca. Ti. V. Cr. Mn. Fe. Co. Ni. Cu. Zn. Rb. Sr. Y. Zr. Nb. Ba. Hf. Pb. Th. U等27项元素的快速分析方法。从理论上提出了新的基体效应学校正模式,首次引入了非荧光分析的物质(筒称NFAM)的新概念;并计算了理论α系数,使理论α系数在粉末压片法x射线荧光分析中获得了应用。本方法测定的对象可以是岩石,土壤和水系沉积物等地质样品。     

蛋白质模式构建消防战勤保障体系的探讨

战勤保障是一个系统工程,利用蛋白质模式分层次、分功能组建战勤保障中队,不同层级区域战勤保障中心,形成一个多功能的战勤保障网络,在建设中加强评估监督增强战勤保障体系的保障能力.