排序方式: 共有93条查询结果,搜索用时 656 毫秒
21.
22.
太湖内源营养盐负荷状况及其对上覆水水质的影响 总被引:7,自引:0,他引:7
以太湖沉积物-上覆水界面为研究对象,于2013年夏季采集46个样点的沉积物柱状样,分析表层沉积物孔隙水中营养盐(正磷酸盐、氨氮、硝氮)的浓度空间分布,估算表层沉积物中磷、氮的扩散通量,明确营养盐在沉积物-水界面的分布规律,以探明内源营养盐负荷对太湖上覆水的污染贡献,并为沉积物-水界面氮磷的转移过程理论补充证据.结果表明:太湖西北部区域的表层沉积物孔隙水中正磷酸盐和硝氮浓度较高,分别达到1.11 mg·L~(-1)和1.25 mg·L~(-1)以上;大部分湖区的氨氮浓度超过2 mg·L~(-1).全湖区范围内,从表层沉积物的上覆水到孔隙水,氨氮含量呈现升高趋势而硝氮含量呈现降低趋势.北部3个湖湾区的沉积物营养盐扩散通量最高,正磷酸盐为2.69~4.60 mg·m~(-2)·d~~(-1),氨氮为17.8~45.7 mg·m-2·d~(-1),而湖岸河口区是沉积物硝氮内源释放显著的区域.沉积物向上覆水释放正磷酸盐和氨氮的年内源污染负荷分别为64.6 t·a~(-1)和1756 t·a~(-1);而上覆水向沉积物汇入硝氮的年负荷为1102 t·a~(-1).氨氮的内源污染负荷与外源污染负荷之比高达18.7%,氨氮、总磷和总氮内源污染为上覆水贡献的浓度分别为0.361、0.013和0.134 mg·L~(-1),表明自由扩散带来的内源负荷会使太湖水中营养盐污染恶化,需引起重视. 相似文献
23.
三峡水库蓄水前后长江干流主要污染物浓度变化趋势分析研究 总被引:3,自引:0,他引:3
利用三峡库区长江干流1998年-2010年水质监测数据,以1998年-2003年代表蓄水前,2004年-2010年代表蓄水后,对比分析蓄水前后主要污染物浓度变化情况,用Spearman秩相关系数法判断其变化趋势的显著性。分析可知,蓄水后氨氮、化学需氧量、总磷指标的平均浓度要低于蓄水前,氨氮、化学需氧量浓度变化幅度大于蓄水前,总磷浓度变化幅度小于蓄水前;Spearman秩相关系数计算结果表明,三峡水库常年回水区内的断面,污染物浓度多数呈下降趋势,但只有晒网坝和培石断面的氨氮指标浓度下降趋势具有显著意义。 相似文献
24.
25.
随着页岩气开发技术的突破与发展,我国已成为继美国、加拿大之后第三个实现页岩气工业化生产的国家。而由页岩气开发伴随的地下水污染、生态破坏等环境问题亦不可忽视。本文通过分析中美页岩气开发过程中的环境管理政策、管理模式,提出加快完善我国页岩气开发环境管理体系及环境监管的建议:1)形成页岩气开发全过程环境管理体系;2)强化页岩气开发的区块规划环评,落实生态保护红线和资源利用上线要求;3)规范项目环境影响评价,提高页岩气环境管理要求;4)在制定页岩气开发污染控制相关标准时纳入开采工艺过程的环保管理要求。 相似文献
26.
27.
28.
29.
Liu Wenshi Yuan Hui Fan Zhenzhen Li Jing Sun Lingru 《Environmental science and pollution research international》2021,28(23):29379-29393
Environmental Science and Pollution Research - Large amounts of water-based drilling cuttings (WDC) would be generated during the drilling of shale gas wells, which would occupy land resources and... 相似文献
30.
In dynamic membrane bioreactors(DMBRs), a dynamic membrane(DM) forms on a support material to act as the separation membrane for solids and liquids. In this study, batch filtration tests were carried out in a DMBR using nylon mesh(25 μm) as support material to filtrate sludge suspensions of variable properties from three different sources to evaluate the effects on the short-term DM formation process(within 240 min). Furthermore, the extended Derjaguin–Landau–Verwey–Overbeek(XDLVO) theory was applied to analyze the sludge adhesion and cohesion behaviors on the mesh surface to predict quantitative parameters of the short-term DM formation process(including initial formation and maturation stage). The filtration results showed that the order of the initial DM formation time(permeate turbidity 1 NTU as an indicator) was as follows: sludge with poor settleability and dewaterability normal sludge sludge with poor flocculability. Moreover, normal sludge(regarding settleability, dewaterability,flocculability, and extracellular polymeric substance) showed a more acceptable DM formation performance(short DM formation time, low permeate turbidity, and high permeate flux) than sludge with poor settleability, dewaterability and flocculability. The influence of sludge properties on the initial DM formation time corroborates the prediction of sludge adhesion behaviors by XDLVO theory. Additionally, the XDLVO calculation results showed that acid–based interaction, energy barrier, and secondary energy minimum were important determinants of the sludge adhesion and cohesion behaviors. Therefore, short-term DM formation process may be enhanced to achieve stable long-term DMBR operation through positive modification of the sludge properties. 相似文献