Simultaneous sorption of aqueous phenanthrene and phosphate onto bentonites modified with AlCl3 and CTMAB

The purpose of this work is to synthesize a new type of bentonite sorbent that can simultaneously remove both organic compounds and phosphate from water. Inorganic-organic bentonites (Al-CTMAB-Bent) were synthesized by modifying bentonites with both AlCl₃ and cetyltrimethyl ammonium bromide (CTMAB). Simultaneous sorption of aqueous phenanthrene and phosphate onto Al-CTMAB-Bent was examined. Removal rates of phenanthrene and phosphate from water reached 96.3% and 90.2%, respectively, at their respective initial concentrations of 1 mg/L and 5 mg/L and the added amount of Al-CTMAB-Bent was 1.25 g/L. The residual turbidity of the Al-CTMAB-Bent suspension decreased 81.4% compared to that of organobentonite suspension after a 1 h settling time. Thus, inorganic-organic bentonite can be used to treat wastewater containing both organic pollutants and phosphate. Translated from Environmental Science, 2006, 27(1): 91–94 [译自: 环境科学]     

Pollution survey of carbonyl compounds in train air

The train is an important vehicle in China, but its air quality has important impacts on passengers’ health. In this work, pollution from carbonyl compounds was measured in the air of six trains. The objectives of this work were to investigate carbonyl compound levels in selected air from trains, identify their emission sources, and assess the intake of carbonyl compounds for passengers. The methods for sampling and analyzing 10 carbonyl compounds such as formaldehyde, acetaldehyde, acrolein, acetone, propionaldehyde, crotonaldehyde, butyraldehyde, benzaldehyde, cyclohexanone, and valeraldehyde in indoor air were proposed with the sampling efficiency, recovery, and detection limit being 92%–100%, 91%–104%, and 0.26–0.82 ng/m³, respectively. It was indicated that the total concentrations of carbonyl compounds were 0.159–0.2828 mg/m³ with the average concentration of 0.2330 mg/m³. The average concentrations of form aldehyde, acetaldehyde and acetone were 0.0922, 0.0499, and 0.0580 mg/m³, accounting for 42.6%, 21.4%, and 24.9% of the total concentrations of carbonyl compounds, respectively. The carbonyl compounds probably came from woodwork and cigarette smoking. The intake of carbonyl compounds for the passengers was approximately 0.043–0.076 mg/h. The carbonyl compounds in train air could be harmful to human health. Translated from Environmental Science, 2006, 27(1) 91–94 [译自: 环境科学]     

消防服用织物热防护性能测试分析与研究

热防护性能(Thermal protective performance—TPP)是阻燃型服装或织物隔热防护性能重要指标。本文在已研制的一种模拟人体皮肤及体形的高温"圆筒仪"上进行了改进,并用其测试阻燃服装织物的热防护性能。用膜电偶测量模拟皮肤器表面温升率,并结合烧伤积分模型的评价方法来计算达到二级烧伤的防热时间。与其它一维平面测试装置相比,本装置可较为准确评估实际服装热收缩特征对服装热防护性能的影响。     

Three-dimensional hydrodynamic and water quality model for TMDL development of Lake Fuxian, China

Lake Fuxian is the largest deep freshwater lake in China. Although its average water quality meets Class I of the China National Water Quality Standard (CNWQS), i.e., GB3838-2002, monitoring data indicate that the water quality approaches the Class II threshold in some areas. Thus it is urgent to reduce the watershed load through the total maximum daily load (TMDL) program. A three-dimensional hydrodynamic and water quality model was developed for Lake Fuxian, simulating flow circulation and pollutant fate and transport. The model development process consists of several steps, including grid generation, initial and boundary condition configurations, and model calibration processes. The model accurately reproduced the observed water surface elevation, spatiotemporal variations in temperature, and total nitrogen (TN), total phosphorus (TP), and chemical oxygen demand (COD) concentrations, suggesting a reasonable numerical representation of the prototype system for further TMDL analyses. The TMDL was calculated using two interpretations of the water quality standards for Class I of the CNWQS based on the maximum instantaneous surface and annual average surface water concentrations. Analysis of the first scenario indicated that the TN, TP and COD loads should be reduced by 66%, 68% and 57%, respectively. Water quality was the highest priority; however, local economic development and cost feasibility for load reduction can pose significant issues. In the second interpretation, the model results showed that, under the existing conditions, the average water quality meets the Class I standard and therefore load reduction is unnecessary. Future studies are needed to conduct risk and cost assessments for realistic decision-making.     

Adsorption of mixed cationic-nonionic surfactant and its effect on bentonite structure

The adsorption of cationic-nonionic mixed surfactant onto bentonite and its effect on bentonite structure were investigated. The objective was to improve the understanding of surfactant behavior on clay mineral for its possible use in remediation technologies of soil and groundwater contaminated by toxic organic compounds. The cationic surfactant used was hexadecylpyridinium bromide (HDPB), and the nonionic surfactant was Triton X-100 (TX100). Adsorption of TX100 was enhanced significantly by the addition of HDPB, but this enhancement decreased with an increase in the fraction of the cationic surfactant. Part of HDPB was replaced by TX100 which decreased the adsorption of HDPB. However, the total adsorbed amount of the mixed surfactant was still increased substantially, indicating the synergistic effect between the cationic and nonionic surfactants. The surfactant-modified bentonite was characterized by Brunauer-Emmett-Teller specific surface area measurement, Fourier transform infrared spectroscopy, and thermogravimetric-derivative thermogravimetric/differential thermal analyses. Surfactant intercalation was found to decrease the bentonite specific surface area, pore volume, and surface roughness and irregularities, as calculated by nitrogen adsorption-desorption isotherms. The co-adsorption of the cationic and nonionic surfactants increased the ordering conformation of the adsorbed surfactants on bentonite, but decreased the thermal stability of the organobentonite system.     

玻璃熔窑烟气脱硝技术探讨

结合玻璃熔窑烟气排放的特点,阐述了国内外玻璃熔窑烟气脱硝技术,湿法脱硝、选择性催化还原法(SCR)、选择性非催化还原法(SNCR)及其优缺点。探讨了SCR脱硝技术在玻璃熔窑烟气脱硝的运用,并给出了工程实例,最后提出了一些建议。     

电感耦合等离子体质谱法测定地表水中铊的研究

本研究建立了电感耦合等离子体质谱法(ICP-MS)测定地表水中铊的方法。对仪器工作条件进行了优化,用在线内标校正基体效应的干扰,重点考察了样品测定介质、酸度、共存元素干扰等因素对测定结果的影响。在最佳实验条件下,该方法的检出限可达0.003μg/L,线性相关系数不小于0.999 9,加标回收率为93%~110%。与传统的原子吸收法相比,该方法不需要富集等繁琐的前处理过程,具有检出限低、快速、精密度和准确度高等优点。     

硫黄联合装置停工密闭吹扫的实现

介绍了中国石化济南分公司硫黄回收联合装置安全环保停工的过程,在硫黄回收联合装置停工前,研究讨论各装置停工密闭吹扫的流程及方法,并确定各装置停工吹扫的顺序、注意事项和前期准备工作。在各装置停工吹扫过程中,严格按照停工方案,采取了分装置吹扫,该装置吹扫完毕后立即加盲板隔离,最后放火炬公用系统采取倒吹扫,实现了装置停工密闭吹扫,达到了各装置停工酸性气系统吹扫不放火炬的要求。     

鞍钢钢绳厂生产污水处理的工艺设计及运行效果

本文介绍了鞍钢钢绳厂生产废水处理工艺,包括沉淀系统、气浮系统、砂滤罐过滤系统。通过试验确定p H为11时,沉淀系统对Zn2+的去除率达到98.4%。通过正交试验确定当PAC用量为20 mg/L、PAM用量为2 mg/L、p H 7.5、气浮压力为1.2 Mpa时气浮系统对钢绳厂废水中SS、石油类、COD的去除率分别达到90%、70%、70%。经过砂滤罐过滤系统后废水中的SS为20 mg/L、石油类为2 mg/L、COD为48 mg/L,其去除率分别达到94%、78%、80%。     

Ultrasonic preparation of nano-nickel/activated carbon composite using spent electroless nickel plating bath and application in degradation of 2,6-dichlorophenol

Ni was effectively recovered from spent electroless nickel （EN） plating baths by forming a nano-nickel coated activated carbon composite. With the aid of ultrasonication, melamine- formaldehyde-tetraoxalyl-ethylenediamine chelating resins were grafted on activated carbon （MFT/AG）. PdC12 sol was adsorbed on MFT/AC, which was then immersed in spent electroless nickel plating bath; then nano-nickel could be reduced by ascorbic acid to form a nano-nickel coating on the activated carbon composite （Ni/AC） in situ. The materials present were carefully examined by Fourier transform infrared spectroscopy, X-ray diffraction, field emission scanning electron microscopy, X-ray photoelectron spectroscopy and electro- chemistry techniques. The resins were well distributed on the inside and outside surfaces of activated carbon with a size of 120 ± 30 nm in MFT/AC, and a great deal of nano-nickel particles were evenly deposited with a size of 3.8 ± 1.1 nm in Ni/MFT. Moreover, Ni/AC was successfully used as a catalyst for ultrasonic degradation of 2.6-dichloronhenol.