Assessment of sampling and chemical analysis of source-separated organic household waste

The quality of the waste sampling procedure and chemical analysis was evaluated in a research program on characterization of organic waste obtained after disc screening of source-separated organic household waste. The sampling procedures focused on a truckload of waste and involved several steps of subsampling including shredding, mixing, blending, high-speed-blending, drying and milling prior to analysis of the organic waste with respect to ash content, crude fibers, crude fat, crude protein, sugar, starch, enzyme-digestible organic matter, P, N, C, H, S and calorific value. The statistical evaluation of the procedures involved 10 samples of the same truckload of waste obtained by splitting the sample at each level in the procedure according to a staggered, incomplete nested statistical design. Furthermore, one sample was analysed six times over a period of approximately one year. The statistical evaluation showed that no single step in the sampling procedure contributed with excessive variance and that the variance caused by the sampling procedure was approximately the same as the variance in the chemical analysis observed over a year. The variance varied with the analytical parameter but for most parameters the uncertainty was satisfactorily low (of the order of 3-10% expressed as the relative standard deviation, which is considered to be satisfactory for waste characterization).     

Constructing land-use maps of the Netherlands in 2030

The National Environmental Assessment Agency of the RIVM in the Netherlands is obliged to report on future trends in the environment and nature every 4 years. The last report, Nature Outlook 2, evaluated the effects of four alternative socio-economic and demographic scenarios on nature and the landscape. Spatially detailed land-use maps are needed to assess effects on nature and landscape. The objective of the study presented here was how to create spatially detailed land-use maps of the Netherlands in 2030 using the Environment Explorer, a Cellular Automata-based land-use model to construct land-use maps from four scenarios. One of these is discussed in great detail to show how the maps were constructed from the various scenario elements, story lines and additional data and assumptions on national, regional and local land-use developments. It was the first time in the history of our outlooks that consistent, spatially detailed land-use maps of the Netherlands for 2030 were constructed from national economic and demographic scenarios. Each map represents a direct reflection of model input and assumptions. The maps do not show the most probable developments in the Netherlands but describe the possible change in land use if Dutch society were to develop according to one of the four scenarios. The large (societal) uncertainties are reflected in the total set of future land-use maps. The application of a land-use model such as the Environment Explorer ensures that all relevant aspects of a scenario, i.e. economic and demographic developments, zoning policies and urban growth, are integrated systematically into one consistent framework.     

Space use optimisation and sustainability-environmental assessment of space use concepts

In this paper, as part of a diptych, we discuss the factor space as a means of improving the environmental performance of building projects. There are indicators for space use efficiency and several more or less broadly supported methods for assessment of environmental issues such as ecological quality, use of building materials and energy consumption. These are discussed in this paper. Assessment methods coupling space use to environmental indicators had not been available until now. Beforehand, plans with different spatial properties could therefore not be environmentally compared. We present a method for the implementation of space use in assessments concerning sustainability. This method was applied to the urban case study presented in our second paper in this journal. In this paper, we also present solutions for improved environmental performance through intensive and multiple use of space in the second, third and fourth dimension.     

Effects of temperature and the presence of benthic predators on the vertical distribution of the ctenophore<Emphasis Type="Italic"> Pleurobrachia pileus</Emphasis>

This study details the investigations of the effect of temperature and the presence of predators on the vertical distribution of the ctenophore Pleurobrachia pileus. Previous studies had suggested that P. pileus moves to the sediment when exposed to colder temperatures as an energy saving strategy. Although we did observe an effect of temperature on the movement of the ciliate combs, the effect of temperature on the average depth of animals in the water column was not significant, but a significant interaction was found between temperature and exposure time. In the presence of benthic predators or of water previously inhabited by these predators P. pileus changed its vertical distribution significantly, and moved away from the sediment, thus reducing the risk of being predated. We conclude that P. pileus can sense the presence of its predators, and changes its behaviour accordingly.Communicated by O. Kinne, Oldendorf/Luhe     

Characterisation of a reference site for quantifying uncertainties related to soil sampling

The paper reports a methodology adopted to face problems related to quality assurance in soil sampling. The SOILSAMP project, funded by the Environmental Protection Agency of Italy (APAT), is aimed at (i) establishing protocols for soil sampling in different environments; (ii) assessing uncertainties associated with different soil sampling methods in order to select the "fit-for-purpose" method; (iii) qualifying, in term of trace elements spatial variability, a reference site for national and international inter-comparison exercises. Preliminary results and considerations are illustrated.     

Characterisation of heavy metal discharge into the Ria of Huelva

The Ria of Huelva estuary, in SW Spain, is known to be one of the most heavy metal contaminated estuaries in the world. River contribution to the estuary of dissolved Cu, Zn, Mn, Cr, Ni, Cd, and As were analysed for the period 1988-2001. The obtained mean values show that this contribution, both because of the magnitude of total metals (895.1 kg/h), composition, toxicity (8.7 kg/h of As+Cd+Pb) and persistence, is an incomparable case in heavy metal contamination of estuaries. The amount and typology of heavy metal discharge to the Ria of Huelva are related to freshwater flow (and, consequently, to rainfall); as a result, two different types of heavy metal discharge can be distinguished in the estuary: during low water (50% of the days), with only 19.3 kg/h of heavy metals, and during high water or flood (17% of the days), where daily maximum discharge of 72,475 kg of heavy metals were recorded, from which 1481 kg were of As, 470 kg of Pb, and 170 kg of Cd. In the most frequent situation (77% of the days), the Odiel River discharges from 90% to 100% of the freshwater received by the estuary. Despite this, the high concentration of heavy metals in the Tinto River water causes this river to discharge into the Ria of Huelva 12.5% of fluvial total dissolved metal load received by the estuary.     

Quality assurance for the measurements and monitoring of radioactivity in the environment

During the Fifth Framework Programme (FP5) of the European Commission--according to an institutional programme in support to the policy of the European Commission for the implementation of Art. 35 and 36 of the Euratom Treaty as well as in the framework of the OSPAR Convention for the protection of marine environment of the north-east Atlantic--at the Institute for Transuranium Elements (ITU--General Directorate Joint Research Centre--European Commission), a reference laboratory for the measurement of radioactivity in the environment (MaRE laboratory) has been set up. In this paper, the principles and philosophy in order to improve the quality and reliability of analytical data for the measurement and monitoring of radioactivity in the environment under a quality assurance (QA) programme are presented. Examples of how a QA programme at the MaRE laboratory is developed and applied are given. Internal and external quality control (QC) programmes are also discussed.     

Radon concentrations in groundwaters of the Polish part of the Sudety Mountains (SW Poland)

In the course of researches into radon occurrence in the groundwaters of the Polish part of the Sudety Mountains, conducted in various research centres in Poland, almost 1000 radon concentration determinations have been collected. These results have given the basis for an attempt to characterise the groundwaters of this region with respect to radon content. Radon concentrations oscillated within the range of 0.2-1645 Bq/dm3, with the arithmetic mean at 240.0 Bq/dm3 and the geometric mean at 106.7 Bq/dm3. The largest number of radon concentrations found in the Sudetic groundwaters ranged between ca. 3-6 and 1000 Bq/dm3. The values over 1000 Bq/dm3 can be considered anomalously high. They constitute 3.9% of all the results and occur around six localities within different geological units of the Sudety Mountains. These are shallow circulation, low mineralised groundwaters, which outflow from gneisses and granites. In the face of the fact that from 12.8% to 72.7% (depending on the adopted norm of maximum radon concentration for drinking waters) of the examined waters cannot be drunk directly without removing at least part of the radon, and in the face of the possibility of recognizing as many as 63.5% of the waters as potentially medicinal, extensive research of radon geochemistry in the Sudety Mountains area should be urgently undertaken.     

Land Evaluation for Maize Based on Fuzzy Set and Interpolation

The objective of this article is to apply fuzzy set and interpolation techniques for land suitability evaluation for maize in Northern Ghana. Land suitability indices were computed at point observations using the Semantic Import (SI) model, whereas spatial interpolation was carried out by block kriging. Interpolated land suitability shows a high correlation (R2 = 0.87) with observed maize yield at the village level. This indicates that land suitability is closely related to maize yield in the study area. Membership functions were further used to assess the degree of limitation of land characteristics to maize. Sixty percent of the data has membership functions ranging from 0.23 for ECEC to 1.00 for drainage. ECEC, organic C, and clay are the major constraints to maize yield. The use of the fuzzy technique is helpful for land suitability evaluation, especially in applications in which subtle differences in soil quality are of a major interest. Furthermore, the use of kriging that exploits spatial variability of data is useful in producing continuous land suitability maps and in estimating uncertainties associated with predicted land suitability indices.     

Modeling flow and nitrate fate at catchment scale in Brittany (France)

In the intensive pig-farming (Sus scrofa) area of Brittany (western France), many surface and subsurface water resources are contaminated by nitrate (NO3) with concentrations that chronically exceed the European Community 50 mg L(-1) drinking standard. To ensure sustainable water supply, the fate of NO3 must be considered in both surface water and ground water. The fate of N was investigated in a Britain catchment, the Co?t-Dan watershed, with an integrated management tool: the hydrological SWAT model coupled with the ground water model MODFLOW, and its companion contaminant and solute transport model MT3DMS. The model was validated with respect to water quantity during a 6-yr period and for the NO3 concentration during a 44-mo period, at two gauging stations in the catchment. The coupled models reproduced accurately the measurements. At the basin outlet, the Nash-Sutcliffe coefficients were 0.88 for monthly flow for the entire period and 0.87 for monthly N load. Alternative scenarios were simulated and showed potential benefits of decreasing manure application from 210 to 170 kg N ha(-1) as required by the European Commission Nitrates Directive.