Positive association of queen number and queen-mating frequency Myrmica ants: a challenge to the genetic-variability hypotheses

Detailed knowledge of the mating system in specific social insect populations is essential for testing general evolutionary hypotheses of multiple paternity in eusocial Hymenoptera. We have studied the mating frequency of queens in a polygynous population of the red ant Myrmica sulcinodis. Genetic mother-offspring analysis showed that double mating occurred at a considerable frequency, but that the effective number of queen-mates remained close to one. After quantifying the effects of multiple maternity (polygyny) and multiple paternity (polyandry) on the genetic diversity of workers, we conclude that multiple paternity in M. sulcinodis did not evolve as an adaptation to increase genetic variation within colonies. Contrary to the predictions from `genetic variability' hypotheses, we found a positive correlation between colony-specific queen number and the average number of mates per queen. Such positive association of queen number and frequency of multiple mating was also found after analysing comparative data across six species of Myrmica ants. These results suggest that resticted dispersal of young queens may be a common factor promoting both polygyny and polyandry at the same time, and that moderate degrees of multiple mating may be an unselected consequence of (1) mating at low cost when mating occurs close to the nest and (2) mating in swarms with a highly male biased operational sex ratio. Future comparative tests of genetic-variability hypotheses should therefore not include species with such evolutionary derived mating system characteristics. Received: 30 April 1998 / Accepted after revision: 19 August 1998     

The importance of group‐focused transformational leadership and felt obligation for helping and group performance

Leaders face a challenge to simultaneously motivate workgroups and the individuals within them. Recent criticisms highlight the need to deconstruct broad leadership constructs to offer better theoretical insight into the effects of specific leadership behaviors on groups versus individuals. We address this call by exploring the effects of group‐focused and individual‐focused aspects of transformational leadership. Applying social identity theory, we theorize that group‐focused transformational leadership is key to fostering felt obligation, motivating helping behavior, and enhancing group performance, whereas individual‐focused leadership may only foster helping when individuals also feel a sense of obligation toward their workgroup. In a field study of 260 employees reporting to 36 supervisors in a skilled trade company, we find support for these predictions using multilevel structural equation modeling and multilevel mixed effects modeling. Thus, group‐focused (vs. individual‐focused) transformational leadership and subsequent felt obligation are important antecedents for encouraging helping and, in turn, workgroup performance.     

Global mismatches in aboveground and belowground biodiversity

Human activities are accelerating global biodiversity change and have resulted in severely threatened ecosystem services. A large proportion of terrestrial biodiversity is harbored by soil, but soil biodiversity has been omitted from many global biodiversity assessments and conservation actions, and understanding of global patterns of soil biodiversity remains limited. In particular, the extent to which hotspots and coldspots of aboveground and soil biodiversity overlap is not clear. We examined global patterns of these overlaps by mapping indices of aboveground (mammals, birds, amphibians, vascular plants) and soil (bacteria, fungi, macrofauna) biodiversity that we created using previously published data on species richness. Areas of mismatch between aboveground and soil biodiversity covered 27% of Earth's terrestrial surface. The temperate broadleaf and mixed forests biome had the highest proportion of grid cells with high aboveground biodiversity but low soil biodiversity, whereas the boreal and tundra biomes had intermediate soil biodiversity but low aboveground biodiversity. While more data on soil biodiversity are needed, both to cover geographic gaps and to include additional taxa, our results suggest that protecting aboveground biodiversity may not sufficiently reduce threats to soil biodiversity. Given the functional importance of soil biodiversity and the role of soils in human well-being, soil biodiversity should be considered further in policy agendas and conservation actions by adapting management practices to sustain soil biodiversity and considering soil biodiversity when designing protected areas.     

LCA comparison of container systems in municipal solid waste management

The planning and design of integrated municipal solid waste management (MSWM) systems requires accurate environmental impact evaluation of the systems and their components. This research assessed, quantified and compared the environmental impact of the first stage of the most used MSW container systems. The comparison was based on factors such as the volume of the containers, from small bins of 60–80 l to containers of 2400 l, and on the manufactured materials, steel and high-density polyethylene (HDPE). Also, some parameters such as frequency of collections, waste generation, filling percentage and waste container contents, were established to obtain comparable systems. The methodological framework of the analysis was the life cycle assessment (LCA), and the impact assessment method was based on CML 2 baseline 2000. Results indicated that, for the same volume, the collection systems that use HDPE waste containers had more of an impact than those using steel waste containers, in terms of abiotic depletion, global warming, ozone layer depletion, acidification, eutrophication, photochemical oxidation, human toxicity and terrestrial ecotoxicity. Besides, the collection systems using small HDPE bins (60 l or 80 l) had most impact while systems using big steel containers (2400 l) had less impact. Subsequent sensitivity analysis about the parameters established demonstrated that they could change the ultimate environmental impact of each waste container collection system, but that the comparative relationship between systems was similar.     

Need for improvements in physical pretreatment of source-separated household food waste

The aim of the present study was to investigate the efficiency in physical pretreatment processes of source-separated solid organic household waste. The investigation of seventeen Swedish full-scale pretreatment facilities, currently receiving separately collected food waste from household for subsequent anaerobic digestion, shows that problems with the quality of produced biomass and high maintenance costs are common. Four full-scale physical pretreatment plants, three using screwpress technology and one using dispergation technology, were compared in relation to resource efficiency, losses of nitrogen and potential methane production from biodegradable matter as well as the ratio of unwanted materials in produced biomass intended for wet anaerobic digestion. Refuse generated in the processes represent 13–39% of TS in incoming wet waste. The methane yield from these fractions corresponds to 14–36 Nm³/ton separately collected solid organic household waste. Also, 13–32% of N-tot in incoming food waste is found in refuse. Losses of both biodegradable material and nutrients were larger in the three facilities using screwpress technology compared to the facility using dispersion technology.¹ Thus, there are large potentials for increase of both the methane yield and nutrient recovery from separately collected solid organic household waste through increased efficiency in facilities for physical pretreatment. Improved pretreatment processes could thereby increase the overall environmental benefits from anaerobic digestion as a treatment alternative for solid organic household waste.     

The impact of career customization on work outcomes: Boundary conditions of manager support and employee age

The current paper investigated the longitudinal effects of mass career customization (MCC) on job attitudes and objective career outcomes of employees in a professional service firm in the Netherlands. On the basis of theory on individualization of career trajectories, it was expected that the possibility for employees to customize their careers would be positively related to their job attitudes and subsequent objective career success, as indicated by their levels of affective commitment, work engagement, and received salary and bonuses. However, these effects were expected to occur primarily under the combination of high manager support for implementation of career customization and, on the basis of lifespan theory, older workers, as customization fulfills their increased heterogeneous career preferences. A three‐wave longitudinal study largely showed support for the study hypotheses; the relation between MCC use and work engagement and subsequent career success was stronger for older workers who received support for MCC, whereas the relation between MCC use and commitment was negative for older workers who received low support. The study shows the benefits of career customization in organizations by showing the conditions under which these benefits will manifest. Copyright © 2015 John Wiley & Sons, Ltd.     

Air quality measurements for the aerosol research and inhalation epidemiology study

Measurements of pollutant gases, airborne particulate matter mass and composition, and meteorology have been made at a core site near downtown Atlanta, GA, since August 1998 in support of the Aerosol Research and Inhalation Epidemiology Study (ARIES). This site is one of eight in the Southeastern Aerosol Research and Characterization network. The measurement objective is to provide a long-term, multivariate dataset suitable for investigating statistical associations of respiratory and cardiovascular disease with airborne particulate matter composition, meteorology, and copollutant gases through epidemiologic modeling. Measurements are expected to continue through 2010. Ancillary multiyear measurements at additional sites in the Atlanta metropolitan area and in short-term exposure assessments have been used to estimate the exposure/measurement error associated with using data from a central site to approximate human exposures for the entire area. To date, 13-, 25-, and 53-month air quality datasets have been used in epidemiologic analyses.     

Continuous monitoring of photocatalytic treatments by flow injection. Degradation of dicamba in aqueous TiO2 dispersions.

The possible use of flow injection (FI) to monitor the photocatalytic mineralization of dicamba (3,6-dichloro-2-methoxybenzoic acid) present at the trace level in aqueous solutions containing TiO2 suspensions has been evaluated. Experiments were performed in a stirred photochemical reactor equipped with a simple FI manifold, integrating an online filtration unit able to perform the monitoring of the UV absorbance of the irradiated solution every 4 min. The light source used was a medium pressure mercury lamp (125 W). During the initial steps of the reaction the formation of UV absorbing intermediates, which completely disappear in less than 80 min, was evidenced. Additional HPLC, DOC and chloride ion measurements carried out on manually taken samples confirmed the complete mineralization of dicamba within about 90 min. The proposed on-line monitoring looks particularly suitable for the control of degradation treatments where primary degradation and mineralization steps take place after a comparable irradiation time.     

Tank-connected food waste disposer systems – Current status and potential improvements

An unconventional system for separate collection of food waste was investigated through evaluation of three full-scale systems in the city of Malmö, Sweden. Ground food waste is led to a separate settling tank where food waste sludge is collected regularly with a tank-vehicle. These tank-connected systems can be seen as a promising method for separate collection of food waste from both households and restaurants. Ground food waste collected from these systems is rich in fat and has a high methane potential when compared to food waste collected in conventional bag systems. The content of heavy metals is low. The concentrations of N-tot and P-tot in sludge collected from sedimentation tanks were on average 46.2 and 3.9 g/kg TS, equalling an estimated 0.48 and 0.05 kg N-tot and P-tot respectively per year and household connected to the food waste disposer system. Detergents in low concentrations can result in increased degradation rates and biogas production, while higher concentrations can result in temporary inhibition of methane production. Concentrations of COD and fat in effluent from full-scale tanks reached an average of 1068 mg/l and 149 mg/l respectively over the five month long evaluation period. Hydrolysis of the ground material is initiated between sludge collection occasions (30 days). Older food waste sludge increases the degradation rate and the risks of fugitive emissions of methane from tanks between collection occasions. Increased particle size decreases hydrolysis rate and could thus decrease losses of carbon and nutrients in the sewerage system, but further studies in full-scale systems are needed to confirm this.     

Ecological Impact Assessment in Data-Poor Systems: A Case Study on Metapopulation Persistence

Legislation on the protection of biodiversity (e.g., European Union Habitat and Bird Directives) increasingly requires ecological impact assessment of human activities. However, knowledge and understanding of relevant ecological processes and species responses to different types of impact are often incomplete. In this paper we demonstrate with a case study how impact assessment can be carried out for situations where data are scarce but some expert knowledge is available. The case study involves two amphibian species, the great crested newt (Triturus cristatus) and the natterjack toad (Bufo calamita) in the nature reserve the Meinweg in the Netherlands, for which plans are being developed to reopen an old railway track called the Iron Rhine. We assess the effects of this railway track and its proposed alternatives (scenarios) on the metapopulation extinction time and the occupancy times of the patches for both species using a discrete-time stochastic metapopulation model. We quantify the model parameters using expert knowledge and extrapolated data. Because of our uncertainty about these parameter values, we perform a Monte Carlo uncertainty analysis. This yields an estimate of the probability distribution of the model predictions and insight into the contribution of each distinguished source of uncertainty to this probability distribution. We show that with a simple metapopulation model and an extensive uncertainty analysis it is possible to detect the least harmful scenario. The ranking of the different scenarios is consistent. Thus, uncertainty analysis can enhance the role of ecological impact assessment in decision making by making explicit to what extent incomplete knowledge affects predictions.