Peri- and paracentric inversions in chromosome 12: Prenatal diagnosis and family study

Three different types of chromosome 12 inversion were seen in 15 individuals out of 44 individuals examined in one 8 generation family. Type 1: a pericentric inversion inv(12) (p112; q131) was found in 7 individuals and twice at prenatal diagnosis. Type 2: a paracentric inversion inv(12) (p123; p131) was seen in two individuals. Two individuals carried both inversion chromosomes, namely type 1 and type 2. The two inversion chromosomes were transmitted from each of the parents. Type 3: a double pericentric and paracentric inversion (type 3) inv(12) (p123; p131) (p112; q131) was observed in the daughter of one of the carriers of type 1 and 2 inversions and again at prenatal diagnosis in her son. The double inversion most likely arose through crossing-over in between the two inversion loops. A balanced translocation t(7; 13) and the inversion type 1 was observed in one individual, who transmitted the translocation only to an offspring. The frequency of inversions in amniotic fluid cells observed in our laboratory was 1·9 per cent. The clinical implications of these findings are discussed.     

Probabilistic risk assessment for long-range atmospheric transport of radionuclides

A simplified means of probabilistic risk assessment (PRA) for long-range atmospheric transport based on a K-diffusion model is presented. In a case study, model parameters are estimated by comparing with the results of long-range atmospheric dispersion model calculations using one-year numerical weather prediction model data. It is found that the estimated ensemble mean provides a reasonable first approximation to the total dry and wet deposition from the one-year continuous release.     

A One Year Study on the Concentrations of Norovirus and Enteric Adenoviruses in Wastewater and A Surface Drinking Water Source in Norway

Enteric viruses transmitted via the faecal-oral route occur in high concentrations in wastewater and may contaminate drinking water sources and cause disease. In order to quantify enteric adenovirus and norovirus genotypes I and II (GI and GII) impacting a drinking source in Norway, samples of surface water (52), wastewater inlet (64) and outlet (59) were collected between January 2011 and April 2012. Samples were concentrated in two steps, using an electropositive disc filter and polyethylene glycol precipitation, followed by nucleic acid extraction and analysis by quantitative polymerase chain reaction. Virus was detected in 47/52 (90.4 %) of surface water, 59/64 (92 %) of wastewater inlet and 55/59 (93 %) of wastewater outlet samples. Norovirus GI occurred in the highest concentrations in surface water (2.51e + 04) and adenovirus in wastewater (2.15e + 07). While adenovirus was the most frequently detected in all matrices, norovirus GI was more frequently detected in surface water and norovirus GII in wastewater. This study is the first in Norway to monitor both sewage and a drinking water source in parallel, and confirms the year-round presence of norovirus and adenovirus in a Norwegian drinking water source.     

Footprints on ammonia concentrations from environmental regulations

Releases of ammonia (NH3) to the atmosphere contribute significantly to the deposition of nitrogen to both terrestrial and aquatic ecosystems. This is the background for the national NH3 emission ceilings in Europe. However, in some countries the national legislation aims not only to meet these ceilings but also to reduce the atmospheric nitrogen deposition to local ecosystems. Such measures to reduce the load of nitrogen to local ecosystems were introduced in Denmark in 1994. In this paper we demonstrate that this regulation is reflected in the NH3 concentrations in Denmark. The Danish legislation forces farmers to applying manure to the fields during the crop-growing season. We have analyzed the seasonal variation in local NH3 concentrations over the time period of 1989-2003. During this period the seasonal variation has changed from having moderate spring and autumn concentration peaks to having a single and much more pronounced spring peak. In the analysis we apply an NH3 emission model to demonstrate that these changes in the seasonal variation are a result of the changes in the Danish legislation. The analysis demonstrates the strength of using a high-resolution emission model in the analysis of routine monitoring data.     

Phytoscreening and phytoextraction of heavy metals at Danish polluted sites using willow and poplar trees

The main purpose of this study was to determine typical concentrations of heavy metals (HM) in wood from willows and poplars, in order to test the feasibility of phytoscreening and phytoextraction of HM. Samples were taken from one strongly, one moderately, and one slightly polluted site and from three reference sites. Wood from both tree species had similar background concentrations at 0.5 mg kg^?1 for cadmium (Cd), 1.6 mg kg^?1 for copper (Cu), 0.3 mg kg^?1 for nickel (Ni), and 25 mg kg^?1 for zinc (Zn). Concentrations of chromium (Cr) and lead (Pb) were below or close to detection limit. Concentrations in wood from the highly polluted site were significantly elevated, compared to references, in particular for willow. The conclusion from these results is that tree coring could be used successfully to identify strongly heavy metal-polluted soil for Cd, Cu, Ni, Zn, and that willow trees were superior to poplars, except when screening for Ni. Phytoextraction of HMs was quantified from measured concentration in wood at the most polluted site. Extraction efficiencies were best for willows and Cd, but below 0.5 % over 10 years, and below 1?‰ in 10 years for all other HMs.     

Leaching of cyanogenic glucosides and cyanide from white clover green manure

Use of crops for green manure as a substitute for chemical fertilizers and pesticides is an important approach towards more sustainable agricultural practices. Green manure from white clover is rich in nitrogen but white clover also produces the cyanogenic glucosides (CGs) linamarin and lotaustralin; CGs release toxic hydrogen cyanide (HCN) upon hydrolysis which may be utilized for pest control. We demonstrate that applying CGs in the form of a liquid extract of white clover to large columns of intact agricultural soils can result in leaching of toxic cyanide species to a depth of at least 1m. Although degradation of the CGs during leaching proceeded with half lives in the interval 1.5-35 h depending on soil characteristics, a fraction of the applied CGs (0.9-3.2%) was recovered in the leachate as either CGs or toxic cyanide species. Detoxification of the HCN formed was rapid in soil and leachate from both sandy and loamy soil. However, 30% of the leachate samples exceeded the EU threshold value of 50 micrgl(-1) total cyanide for drinking water and 85% exceeded the US threshold of 5 micrgl(-1) for cyanide chronic ecotoxicity in fresh water. This study demonstrates that even easily degradable natural products present in crop plants as defense compounds pose a threat to the quality of groundwater and surface waters. This aspect needs consideration in assessment of the risk associated with use of crops as green manure to replace chemical fertilizers and pesticides as well as in genetic engineering approaches to design crops with improved pest resistance.     

Emissions from heated indoor dust

Settled indoor dust was collected from a university building, and the fine fraction was heated in the temperature range of 50-250 degrees C. Emissions of compounds were analysed and identified in a system consisting of a thermal desorption unit coupled to a gas chromatograph-mass spectrometer (GC-MS). The heating took place in both an oxidative (air) and an inert (He) atmosphere. The results indicate that oxidation of adsorbed compounds occurred, as well as decomposition of the dust itself. The emission in air started somewhere between 150 and 200 degrees C, with aldehydes and ketones as the main compounds. When heated in the inert atmosphere, semivolatile organic compounds (SVOCs) were emitted at temperatures above 150 degrees C. These compounds were not found in the air system, probably due to oxidation. Based on the obtained results we recommend that the temperature of hot surfaces in indoor environments should be kept below 150 degrees C to avoid oxidation of indoor dust and minimise the emissions.     

Runoff phosphorus losses as related to phosphorus source, application method, and application rate on a Piedmont soil

Land application of animal manures and fertilizers has resulted in an increased potential for excessive P losses in runoff to nutrient-sensitive surface waters. The purpose of this research was to measure P losses in runoff from a bare Piedmont soil in the southeastern United States receiving broiler litter or inorganic P fertilizer either incorporated or surface-applied at varying P application rates (inorganic P, 0-110 kg P ha(-1); broiler litter, 0-82 kg P ha(-1)). Rainfall simulation was applied at a rate of 76 mm h(-1). Runoff samples were collected at 5-min intervals for 30 min and analyzed for reactive phosphorus (RP), algal-available phosphorus (AAP), and total phosphorus (TP). Incorporation of both P sources resulted in P losses not significantly different than the unfertilized control at all application rates. Incorporation of broiler litter decreased flow-weighted concentration of RP in runoff by 97% and mass loss of TP in runoff by 88% compared with surface application. Surface application of broiler litter resulted in runoff containing between 2.3 and 21.8 mg RP L(-1) for application rates of 8 to 82 kg P ha(-1), respectively. Mass loss of TP in runoff from surface-applied broiler litter ranged from 1.3 to 8.5 kg P ha(-1) over the same application rates. Flow-weighted concentrations of RP and mass losses of TP in runoff were not related to application rate when inorganic P fertilizer was applied to the soil surface. Results for this study can be used by P loss assessment tools to fine-tune P source, application rate, and application method site factors, and to estimate extreme-case P loss from cropland receiving broiler litter and inorganic P fertilizers.     

Testing the importance of accurate meteorological input fields and parameterizations in atmospheric transport modelling using dream - validation against ETEX-1

A tracer model, the DREAM, which is based on a combination of a near-range Lagrangian model and a long-range Eulerian model, has been developed. The meteorological meso-scale model, MM5V1, is implemented as a meteorological driver for the tracer model. The model system is used for studying transport and dispersion of air pollutants caused by a single but strong source as, e.g. an accidental release from a nuclear power plant. The model system including the coupling of the Lagrangian model with the Eulerian model are described. Various simple and comprehensive parameterizations of the mixing height, the vertical dispersion, and different meterological input data have been implemented in the combined tracer model, and the model results have been validated against measurements from the ETEX-1 release. Several different statistical parameters have been used to estimate the differences between the parameterizations and meterological input data in order to find the best performing solution.     

Indirect and Avoided Environmental Consequences in Project Evaluation

The paper focuses on indirect environmental consequences, namely the environmental consequences of the production of project inputs. In addition, we introduce the term 'avoided environmental consequences', i.e. the environmental consequences associated with diversion of production factors from alternative use. The former are always relevant, while the avoided consequences are only relevant in cases involving fully-employed production factors that would otherwise be used in production. The inclusion of indirect and avoided environmental consequences may considerably affect the outcome of traditional project evaluation. In this paper it is suggested how the indirect and avoided environmental consequences may be described using the input-output system in combination with environmental coefficients.