Field-scale operation of methane biofiltration systems to mitigate point source methane emissions

Methane biofiltration (MBF) is a novel low-cost technique for reducing low volume point source emissions of methane (CH₄). MBF uses a granular medium, such as soil or compost, to support the growth of methanotrophic bacteria responsible for converting CH₄ to carbon dioxide (CO₂) and water (H₂O). A field research program was undertaken to evaluate the potential to treat low volume point source engineered CH₄ emissions using an MBF at a natural gas monitoring station. A new comprehensive three-dimensional numerical model was developed incorporating advection-diffusive flow of gas, biological reactions and heat and moisture flow. The one-dimensional version of this model was used as a guiding tool for designing and operating the MBF. The long-term monitoring results of the field MBF are also presented. The field MBF operated with no control of precipitation, evaporation, and temperature, provided more than 80% of CH₄ oxidation throughout spring, summer, and fall seasons. The numerical model was able to predict the CH₄ oxidation behavior of the field MBF with high accuracy. The numerical model simulations are presented for estimating CH₄ oxidation efficiencies under various operating conditions, including different filter bed depths and CH₄ flux rates. The field observations as well as numerical model simulations indicated that the long-term performance of MBFs is strongly dependent on environmental factors, such as ambient temperature and precipitation.     

Profile of trace elements in Parasol Mushroom (Macrolepiota procera) from Tucholskie Forest

The aim of this study was to determine 19 elements contents and bioconcentration potential in fruiting bodies of Parasol Mushroom (Macrolepiota procera) collected from the Tucholskie Forest complex in Poland. Also discussed were Cd, Pb and Hg contents of edible caps in relation to the current regulatory standards. K, P and Mg were particularly abundant in caps and stipes, median values were 38-49, 13, and 1.6-1.6 mg/g dry weight, and followed by Ca, Na and Rb at 110-540, 44-240 and 20-50 μg/g dw, respectively. Concentrations of Al, Fe, Zn, Cu and Mn were from less than 50 to 180 μg/g dw, while concentrations of other elements were ～l.0?μg/g dw or less. Cu, K, Ag, Cd, Na, Rb, Zn and Hg were bioconcentrated (BCF >1), while Al, Ba, Fe, Mn, Co, Sr, Pb and Cr were not bioaccumulated (BCF <1). Cd and Pb content of Parasol Mushroom's edible caps collected from some sites in the Tucholskie Forest exceed the maximum levels set in the EU for cultivated mushrooms.     

Modeling and optimization of reductive degradation of chloramphenicol in aqueous solution by zero-valent bimetallic nanoparticles

Purpose

The present study aims to investigate the individual and combined effects of temperature, pH, zero-valent bimetallic nanoparticles (ZVBMNPs) dose, and chloramphenicol (CP) concentration on the reductive degradation of CP using ZVBMNPs in aqueous medium.

Method

Iron?Csilver ZVBMNPs were synthesized. Batch experimental data were generated using a four-factor statistical experimental design. CP reduction by ZVBMNPs was optimized using the response surface modeling (RSM) and artificial neural network-genetic algorithm (ANN-GA) approaches. The RSM and ANN methodologies were also compared for their predictive and generalization abilities using the same training and validation data set. Reductive by-products of CP were identified using liquid chromatography-mass spectrometry technique.

Results

The optimized process variables (RSM and ANN-GA approaches) yielded CP reduction capacity of 57.37 and 57.10?mg?g^?1, respectively, as compared to the experimental value of 54.0?mg?g^?1 with un-optimized variables. The ANN-GA and RSM methodologies yielded comparable results and helped to achieve a higher reduction (>6%) of CP by the ZVBMNPs as compared to the experimental value. The root mean squared error, relative standard error of prediction and correlation coefficient between the measured and model-predicted values of response variable were 1.34, 3.79, and 0.964 for RSM and 0.03, 0.07, and 0.999 for ANN models for the training and 1.39, 3.47, and 0.996 for RSM and 1.25, 3.11, and 0.990 for ANN models for the validation set.

Conclusion

Predictive and generalization abilities of both the RSM and ANN models were comparable. The synthesized ZVBMNPs may be used for an efficient reductive removal of CP from the water.     

Mixing ratios of carbonyls and BTEX in ambient air of Kolkata, India and their associated health risk

Mixing ratios of 15 carbonyls and BTEX (benzene, toluene, ethyl benzene, xylenes) were measured for the first time in ambient air of Kolkata, India at three sites from March to June 2006 and their photochemical reactivity was evaluated. Day and nighttime samples were collected on weekly basis. Formaldehyde was the most abundant carbonyl (mean concentration ranging between 14.07 microg m(-3) to 26.12 microg m(-3) over the three sites) followed by acetaldehyde (7.60-18.67 microg m(-3)) and acetone (4.43-10.34 microg m(-3)). Among the high molecular weight aldehydes, nonanal showed the highest concentration. Among the mono-aromatic VOCs, mean concentration of toluene (27.65-103.31 microg m(-3)) was maximum, closely followed by benzene (24.97-79.18 microg m(-3)). Mean formaldehyde to acetaldehyde (1.4) and acetaldehyde to propanal ratios (5.0) were typical of urban air. Based on their photochemical reactivity towards OH. radical, the concentrations of the VOCs were scaled to formaldehyde equivalent, which showed that the high molecular weight carbonyls and xylenes contribute significantly to the total OH-reactive mass of the VOCs. Due to the toxic effect of the VOCs studied, an assessment for both cancer risk and non-cancer hazard due to exposure to the population were calculated. Integrated life time cancer risk (ILTCR) due to four carcinogens (benzene, ethyl benzene, formaldehyde and acetaldehyde) and non-cancer hazard index for the VOCs at their prevailing level were estimated to be 1.42E-04 and 5.6 respectively.     

Limnochemistry and nutrient dynamics in Upper Lake, Bhopal, India

In limnetic ecosystem, water quality depends upon physical, chemical, and biological factors. Effects of temperature, light scattering, and absorption by suspended and dissolved matter, transport, and mixing of nutrients within the lake are the significant factors as far as water quality is concerned. Nutrient loading into the lake and internal cycling of nutrients is always a matter of concern and critical to number of processes. During the winter season, heat and momentum transfer at the lake surface and the temperature-density relation of water destabilize the water column and drive vertical mixing and transport processes. The deepening of the surface layer produces nutrient transfer from the hypolimnion into the euphotic zone of epilimnion. It may also resuspend sediments that would have settled under stratified conditions, or redistribute particles that may still be in suspension. Thus, there exists a complex connection between the hydrodynamics and water quality issues. Present study is an effort to understand how seasonal changes in the limnetic ecosystem regulate the limnochemistry and movement of nutrient. The study revealed that significant variations of nutrients and organic load were observed between epilimnion and hypolimnion during summer season, and the lake was found in hyper-eutrophic condition throughout the study period.     

发展中国家运输用燃油的需求状况

发展中国家石油消耗量占世界石油总消耗量的比率正在逐年上升。1970年发展中国家石油消耗量约为500万桶/d,仅占世界石油总消耗量的10％;而1985年则上升到1000万桶/d,约占世界石油总消耗量的15％。在发展中国家的石油总消耗量中,运输用燃油为其主要部分,占总消耗量的42％。     

四川水资源的利用与保护（下）

(二)地下水利用为适应工农业生产发展和城镇居民生活用水之需,四川除修建了大量蓄、引、提工程设施广泛利用其地表水资源外,还大量开发利用地下水资源。据统计,四川每年开发利用地下水,含工业用水、农业灌溉、居     

Removal of chromium and reduction of toxicity to Microtox system from tannery effluent by the use of calcium alginate beads containing humic acid

Removal of chromium (Cr) from tannery effluents by recovery of metal also reduces the ecotoxicological impact. To develop such a process, columns packed with calcium alginate (CA) beads with or without humic acid (HA) have been used as an adsorbent and tannery effluent was passed through it. Concentration of Cr in beads and in different fractions collected after adsorption was measured. Change in total organic carbon content during the process was also noticed. The fractions were also tested for toxicity towards Microtox assay. EC(50) values were determined with the help of Microtox analyser 500. Data showed that the CA beads along with HA could be effectively utilised in removal of 54% Cr and also in reducing the toxicity (EC(50) (%) in 5 min=>100 in fractions collected after 72 h).     

Light-induced transformation of tribenuron-methyl on glass, soil, and plant surface

Photolysis of tribenuron-methyl (methyl 2-[[[[N-(4-methoxy-6-methyl-1,3,5triazin-2-yl)methylamino]carbonyl]amino]sulfonyl]benzoate), a sulfonylurea herbicide, was studied as thin film on glass surface, soil surface, and plant surface. A number of photoproducts such as 4-methoxy-6-methyl-2-aminomethyl-1,3,5-triazine; methyl-2-(aminosulfonyl) benzoate; N-(2-carbomethoxyphenyl)-N-(4-methoxy-6-methyl-1,3,5-triazin-2-yl)-N'-methylurea; N-(2-carbomethoxyphenyl sulfonyl)-N-methyl urea; o-benzoic sulfimide and 4-methoxy-6-methyl-2-amino-1,3,5-triazine were identified by comparison of their GC-MS with the authentic standards. The rate of degradation in all the cases followed first-order kinetics with a statistically significant correlation coefficient. Rate of photodegradation was greater on glass surface than on soil surface.