Investigation of some basic water quality parameters of the north Bengal Terai river Kaljani--a tributary of river Torsa, and comparison thereof with the mainstream

Some physico-chemical parameters of Kaljani River were studied in and around Alipurduar municipality. The principal characteristics of Kaljani River are high TSS, Mg-hardness, COD, and Phosphate 'P' Comparison of water quality parameters of the two rivers demonstrated higher range of alkalinity, ammonia 'N' content and chloride content in Torsa than Kaljani. River Kaljani showed higher COD range than Torsa. Mean BOD value of both these rivers ranged between 0.93-1.65 mg/l. Overall TDS content of Kaljani was found to be lower than Torsa. Maximum phosphate 'P' content was observed at the downstream of both the rivers.     

A design of a vermiculite column adsorber for the removal of lead from water

Mini-column techniques were employed to determine the mass transfer coefficient for lead adsorption onto vermiculite. Variation of the mass transfer coefficient with flow rate, particle size of sorbent, and influent lead concentration were studied. Multiple linear regression (MLR) analysis showed that the mass transfer coefficient varied as the 0.43 power of the liquid flow rate and inversely as the 0.272 power of particle diameter of the vermiculite, but was independent of the influent concentration of lead. Different parameters of a fixed bed column design for the removal of lead by vermiculite were determined using the data from the batch sorption study. The performance of the liquid bed column in removing lead was in close agreement with predicted performance using the batch isotherm data.     

Performance of RBC coupled to a polyurethane foam to biodegrade petroleum refinery wastewater

Biological treatment of petroleum refinery wastewater was studied in a rotating biological contactor (RBC) coupled to a polyurethane foam (PUF) as a porous biomass support. The PUF was attached on both sides of biodisks. The biodegradation studies were carried out at varying hydraulic and organic loadings. COD removal efficiency of up to 87% was achieved. The results obtained in terms of biodegradation of COD, NH3-N, phenol, hydrocarbons and suspended solids in this study were compared with those in the literature. The RBC-PUF bioreactor was found to have a better performance than a conventional RBC for the biodegradation of the above mentioned parameters. A higher concentration of active biomass (77 g TVS/m2) was observed in the RBC-PUF as compared to other treatment systems. A linear relationship between COD applied and COD removed was observed for the combined four stage system as well as for the individual stages.     

Forecasting daily maximum surface ozone concentrations in Brunei Darussalam--an ARIMA modeling approach

A time series approach using autoregressive integrated moving average (ARIMA) modeling has been used in this study to obtain maximum daily surface ozone (O3) concentration forecasts. The order of the fitted ARIMA model is found to be (1,0,1) for the surface O3 data collected at the airport in Brunei Darussalam during the period July 1998-March 1999. The model forecasts of one-day-ahead maximum O3 concentrations have been found to be reasonably close to the observed concentrations. The model performance has been evaluated on the basis of certain commonly used statistical measures. The overall model performance is found to be quite satisfactory as indicated by the values of Fractional Bias, Normalized Mean Square Error, and Mean Absolute Percentage Error as 0.025, 0.02, and 13.14% respectively.     

Adsorption/desorption of copper by a sandy soil amended with various rates of manure, sewage sludge, and incinerated sewage sludge

Organic amendments are sometimes applied to agricultural soils to improve the physical, chemical, and microbiological properties of the soils. The organic fractions in these soil amendments also influence metal reaction, particularly the adsorption and desorption of metals, which, in turn, determine the bioavailability of the metals and hence their phytotoxicities. In this study, a Quincy fine sandy (mixed, mesic, Xeric Torripsamments) soil was treated with 0 to 160 g kg(-1) rates of either manure, sewage sludge (SS), or incinerated sewage sludge (ISS) and equilibrated in a greenhouse at near field capacity moisture content for 100 days. Following the incubation period, the soil was dried and adsorption of copper (Cu) was evaluated in a batch equilibration study at either 0, 100, 200, or 400 mg L(-1) Cu concentrations in a 0.01M CaCl2 solution. The desorption of adsorbed Cu was evaluated by three successive elutions in 0.01M CaCl2. Copper adsorption increased with an increase in manure rates. At the highest rate of manure addition (160 g kg(-1) soil), Cu adsorption was two-fold greater than that by the unamended soil at all rates of Cu additions. With increasing rates of Cu additions, the adsorption of Cu decreased from 99.4 to 77.6% of Cu applied to the 160 g kg(-1) manure amended soil. The desorption of Cu decreased with an increase in rate of manure amendment. Effects of sewage sludge amendments on Cu adsorption were somewhat similar to those as described for manure additions. Likewise, the desorption of Cu was the least at the high rate of SS addition (160 g kg(-1)), although at the lower rates there was not a clear indication of the rate effects. In contrast to the above two amendments, the ISS amendment had the least effect on Cu adsorption. At the highest rate of ISS amendment, the Cu adsorption was roughly 50% of that at the similar rate of either manure or SS amendments, across all Cu rates.     

Demonstration of sperm head shape abnormality and clastogenic potential of cypermethrin

Adult male Swiss albino mice were administered ip. suspension solution of cypermethrin in 0.15% DMSO at the doses of 30 mg, 60 mg and 90 mg/kg b. wt. daily for 5 days. Another group of animals was injected cyclophosphamide ip. (60 mg/kg b. wt.) in similar manner which served as positive control. Effect of cypermethrin on body and testes weight and sperm head morphology was studied. Clastogenic potential of cypermethrin was studied by using modified Allium test. The cytological changes were studied in the root tip cells of Allium cepa after 3 days treatment with three different concentration of cypermethrin (0.1, 1.0 and 10.0 microg/ml). The results revealed that body weight gain was considerably reduced in higher dose groups, but the testicular weight did not change significantly in any of the cypermethrin treated groups. However, a significant elevation in the number of abnormal shape of sperm head was noticed in higher dose groups as compared to control. It was observed that the abnormality in the shape of sperm head was dose-dependent. The cytological changes in the root tip cells of Allium cepa indicated that cypermethrin is having toxic effects on the root tip cells in the form of stickiness of chromosomes and also affect the mitotic activity. This study suggest that cypermethrin may have the potential to induce adverse effects on sperm head shape morphology of mouse as well as clastogenic effects on root tip cells of Allium cepa.     

In vitro study of oxytetracycline adsorption on activated charcoal

In vitro adsorption experiments simulating pH in gastric environment and using Langmuir isotherm, showed that 408 mg of oxytetracycline was adsorbed per gram of activated charcoal. Langmuir isotherm fitted adsorption data better than a Freundlich isotherm. Freundlich isotherm showed a specific adsorption capacity of 518 mg/g for activated charcoal. Both isotherm parameters indicated a strong oxytetracycline adsorption on activated charcoal in terms of quantity and binding strength. The results demonstrate that the concomitant use of oxytetracyline and activated charcoal should be avoided.     

Physico-chemical interactions and bioconcentration of zinc and lead in the industrially polluted Husainsagar Lake, Hyderabad, India

This paper deals with the interactions of different physico-chemical parameters in the water profile, and the bioconcentration of zinc and lead in Husainsagar Lake, India. The concentrations of both the metals are within the permissible limits (Indian Council of Medical Research, New Delhi, India (1975). Manual of Standards of Quality for Drinking Water Supplies. ICMR Special Report, p. 44). The concentration of Zn and Pb in the vertical profile were highest in the bottom stratum of the lake and least in the surface stratum. Their concentrations were two to three thousand-fold more in surficial sediments than in the overlying water column. The concentration of Zn increased with increasing trophic level from nanoplankton to zooplankton, but not to fish, and the concentration of Pb decreased with increasing trophic level: nanoplankton --> phytoplankton --> zooplankton --> fish, illustrating no bioconcentration of metals in the classic sense of the term as has been noted for mercury and chlorinated hydrocarbons (DDT).     

Individual and combined effect of mercury and manganese on phenol and proline content in leaf and stem of mungbean seedlings

Mungbean (Vigna radiata L. Wilczelk cv. Pusa Baisakhi seedlings were raised in individual (0, 1, 10, 100 and 1000 ppm) and combined solutions (1 : 1, 10: 1, 1: 0 ppm Hg : Mn) of mercury and manganese for 6 days. Phenol and proline were found to accumulate in leaves in response to treatment with heavy metals. The magnitude of accumulation correlated with concentration of metals. However, a reverse trend was noticed in stem for phenol. Accumulation of phenol in response to heavy metal treatment was organ specific and occurred at higher rate in plant parts, which faced the stress mostly. However, accumulation of proline helped the plant to survive stress situation. In combined solutions, amelioration of mercurial toxicity by manganese was recorded.     

Airborne observations of vegetation and implications for biogenic emission characterization

Measuring hydrocarbons from aircraft represents one way to infer biogenic emissions at the surface. The focus of this paper is to show that complementary remote sensing information can be provided by optical measurements of a vegetation index, which is readily measured with high temporal coverage using reflectance data. We examine the similarities between the vegetation index and in situ measurements of the chemicals isoprene, methacrolein, and alpha-pinene to estimate whether the temporal behavior of the in situ measurements of these chemicals could be better understood by the addition of the vegetation index. Data were compared for flights conducted around Houston in August and September 2000. The three independent sets of chemical measurements examined correspond reasonably well with the vegetation index curves for the majority of flight days. While low values of the vegetation index always correspond to low values of the in situ chemical measurements, high values of the index correspond to both high and low values of the chemical measurements. In this sense it represents an upper limit when compared with in situ data (assuming the calibration constant is adequately chosen). This result suggests that while the vegetation index cannot represent a purely predictive quantity for the in situ measurements, it represents a complementary measurement that can be useful in understanding comparisons of various in situ observations, particularly when these observations occur with relatively low temporal frequency. In situ isoprene measurements and the vegetation index were also compared to an isoprene emission inventory to provide additional insight on broad issues relating to the use of vegetation indices in emission database development.