Design of on-line river water quality monitoring systems using the entropy theory: a case study

The design of a water quality monitoring network is considered as the main component of water quality management including selection of the water quality variables, location of sampling stations and determination of sampling frequencies. In this study, an entropy-based approach is presented for design of an on-line water quality monitoring network for the Karoon River, which is the largest and the most important river in Iran. In the proposed algorithm of design, the number and location of sampling sites and sampling frequencies are determined by minimizing the redundant information, which is quantified using the entropy theory. A water quality simulation model is also used to generate the time series of the concentration of water quality variables at some potential sites along the river. As several water quality variables are usually considered in the design of water quality monitoring networks, the pair-wise comparison is used to combine the spatial and temporal frequencies calculated for each water quality variable. After selecting the sampling frequencies, different components of a comprehensive monitoring system such as data acquisition, transmission and processing are designed for the study area, and technical characteristics of the on-line and off-line monitoring equipment are presented. Finally, the assessment for the human resources needs, as well as training and quality assurance programs are presented considering the existing resources in the study area. The results show that the proposed approach can be effectively used for the optimal design of the river monitoring systems.     

Assessment of the impact of on-site sanitation systems on groundwater pollution in two diverse geological settings—a case study from India

On-site sanitation has emerged as a preferred mode of sanitation in cities experiencing rapid urbanization due to the high cost involved in off-site sanitation which requires conventional sewerages. However, this practice has put severe stress on groundwater especially its quality. Under the above backdrop, a study has been undertaken to investigate the impact of on-site sanitation on quality of groundwater sources in two mega cities namely Indore and Kolkata which are situated in two different geological settings. The parameters for the studies are distance of groundwater source from place of sanitation, effect of summer and monsoon seasons, local hydro-geological conditions, and physico-chemical parameters. NO₃ and fecal coliform concentrations are considered as main indexes of pollution in water. Out of many conclusions which can be made from this studies, one major conclusion is about the influence of on-site sanitation on groundwater quality is minimal in Kolkata, whereas it is significant in Indore. This difference is due to the difference in hydrogeological parameters of these two cities, Kolkata being on alluvium quaternary and Indore being on Deccan trap of Cretaceous to Paleogene age.     

Fertigation effect of distillery effluent on agronomical practices of Trigonella foenum-graecum L. (Fenugreek)

The fertigation effect of distillery effluents concentrations such as 5%, 10%, 25%, 50%, 75% and 100% were studied on Trigonella foenu-graecu (Pusa early bunching) along with control (bore well water). On irrigation of soil with different effluents up to 90 days of harvesting, it was observed that there was a significant effect on moisture content (P < 0.001), EC, pH, Cl⁻, total organic carbon (TOC), HCO₃^-_{3}^{-}, CO₃^-2_{3}^{-2}, Na⁺, K⁺, Ca^2 +, Mg^2 +, Fe^2 +, TKN, NO₃^2-_{3}^{2-}, PO₄^3-_{4}^{3-}, and SO₄^2-_{4}^{2-} (P < 0.0001) and insignificant effect on WHC and bulk density (P > 0.05).There was no significant change in the soil texture of the soil. Among various concentrations of effluent irrigation, the irrigation with 100% effluent concentration decreased pH (16.66%) and increased moisture content (30.82%), EC(84.13%), Cl⁻ (292.37%), TOC (4311.61%), HCO₃^-_{3}^{-} (27.76%), CO₃^-2_{3}^{-2} (32.63%), Na⁺ (273%), K⁺ (31.59%), Ca^2 + (729.76%), Mg^2 + (740.47%), TKN (1723.32%), NO₃^2-_{3}^{2-} (98.02%), PO₄^3-_{4}^{3-} (337.79%), and SO₄^2-_{4}^{2-} (77.78%), Fe^2 + (359.91%), Zn (980.48%), Cu (451.51%), Cd (3033.33%), Pb (2350.00%), and Cr (2375.00%) in the soil. The agronomical parameters such as shoot length, root length, number of leaves, flowers, pods, dry weight, chlorophyll content, LAI, crop yield, and HI of T. foenum-graecum were recorded to be in increasing order at low concentration of the effluent, i.e., from 5% to 50% and in decreasing order at higher effluent concentration, i.e., from 75% to 100% as compared to control. The enrichment factor of various heavy metals was ordered for soil Cd>Cr> Pb>Zn>Cu>Fe and for T. foenum-graecum plants Pb>Cr>Cd>Cu>Zn>Fe after irrigation with distillery effluent.     

Sensitive spectrophotometric methods for the assessment of nitrite in water sample

Two spectrophotometric methods have been developed for the determination of nitrite using dapsone (DAP) with alpha-naphthol and 4-amino-5-hydroxynapthalene-2,7-disulphonic acid monosodium salt (AHNDMS) as chromogenic reagents with maximum absorbance wavelength at 540 and 520 nm respectively. For the method that utilizes dapsone with alpha-naphthol (DAP-alpha-naphthol), the beer's law range is obeyed between 0.05-0.8 microg ml(-1) with molar absorptivity of 5.749 x 104 l mol(-1) cm(-1). The second method that uses dapsone with AHNDMS (DAP-AHNDMS), the beer's law is valid over the range 0.2-1.4 mug ml(-1) and molar absorptivity 2.44 x 104 l mol(-1) cm(-1). The common interfering ions in the analytical procedures have been studied. This proposed methods are reliable, reproducible and have been successfully applied to determine nitrite in various water sources of environmental interest.     

Direct measurement of fugitive emissions of hydrocarbons from a refinery

Refineries are a source of emissions of volatile hydrocarbons that contribute to the formation of smog and ozone. Fugitive emissions of hydrocarbons are difficult to measure and quantify. Currently these emissions are estimated based on standard emission factors for the type and use of equipment installed. Differential absorption light detection and ranging (DIAL) can remotely measure concentration profiles of hydrocarbons in the atmosphere up to several hundred meters from the instrument. When combined with wind speed and direction, downwind vertical DIAL scans can be used to calculate mass fluxes of the measured gas leaving the site. Using a mobile DIAL unit, a survey was completed at a Canadian refinery to quantify fugitive emissions of methane, C2+ hydrocarbons, and benzene and to apportion the hydrocarbon emissions to the various areas of the refinery. Refinery fugitive emissions as measured with DIAL during this demonstration study were 1240 kg/hr of C2+ hydrocarbons, 300 kg/hr of methane, and 5 kg/hr of benzene. Storage tanks accounted for over 50% of the total emissions of C2+ hydrocarbons and benzene. The coker area and cooling towers were also significant sources. The C2+ hydrocarbons emissions measured during the demonstration amounted to 0.17% of the mass of the refinery hydrocarbon throughput for that period. If the same loss were repeated throughout the year, the lost product would represent a value of US$3.1 million/yr (assuming US$40/bbl). The DIAL-measured hourly emissions of C2+ hydrocarbons were 15 times higher than the emission factor estimates and gave a different perspective on which areas of the refinery were the main source of emissions. Methods, such as DIAL, that can directly measure fugitive emissions would improve the effectiveness of efforts to reduce emissions, quantify the reduction in emissions, and improve the accuracy of emissions data that are reported to regulators and the public.     

An improved water footprint methodology linking global consumption to local water resources: a case of Spanish tomatoes

A water footprint (WF) measures the total water consumed by a nation, business or individual by calculating the total water used during the production of goods and services. This paper extends the existing methods for WF to more localised levels for crops grown partly in open systems and partly in plastic-covered houses with multi-seasonal harvesting, such as the horticulture industry in Spain. This improvement makes it possible to visualise the links of EU tomato consumption to precise production sites in Spain and opens a debate to the usefulness of such findings. This paper also compares existing ecological methodologies with WF and argues that both life cycle analysis (LCA) and ecological footprint (EF) models could benefit from WF methods. Our results show that the EU consumes 957,000 tons of Spanish fresh tomatoes annually, which evaporates 71 Mm(3)/yr of water and would require 7 Mm(3)/yr of water to dilute leached nitrates in Spain. In Spain, tomato production alone evaporates 297 Mm(3)/yr and pollutes 29 Mm(3)/yr of freshwater. Depending upon the local agro-climatic character, status of water resources, total tomato production volumes and production system, the impact of EU consumption of fresh tomatoes on Spanish freshwater is very location specific. The authors suggest that business now seek to report and address negative impacts on the environment. WF opens the door to complex water relationships and provides vital information for policy actors, business leaders, regulators and managers to their draw, dependence and responsibilities on this increasingly scarce resource.     

Degradation of greenhouse twines derived from natural fibers and biodegradable polymer during composting

Commercial composting operations generally do not accept organic wastes with plastic twines from the greenhouse vegetable industry and the bulk of the waste materials ends up in landfills. The objectives of this paper are to identify environmentally compatible substitutes that could replace the current use of petrochemically derived plastic twines in greenhouse vegetable production, thus diverting them from landfills, and to assess the extent of their degradation via composting. Physical properties of the twines, including linear density, percent weight loss and tensile strength were monitored for the biodegradation tests. A pilot-scale composting trial was conducted in an in-vessel composting system. Results showed that the three biodegradable twine materials (cotton, jute and EcoPLA) could degrade readily in a composting environment within a reasonable time frame. Specifically, at the end of 105 days of composting, 85.3%, 84.8% and 81.1% of weight loss was observed for cotton, jute and EcoPLA, respectively. Furthermore, EcoPLA exhibited a slower decline in tensile strength with time, when compared to jute and cotton.     

Degradation and metabolite formation of 17beta-estradiol-3-sulphate in New Zealand pasture soils

Estrogens-sulphates such as 17beta-estradiol-3-sulphate and estrone-3-sulphate are excreted by livestock in the urine. These conjugates are precursors to the free counterparts 17beta-estradiol and estrone, which are endocrine disrupting chemicals. In this study microcosm laboratory experiments were conducted in three pasture soils from New Zealand to study the aerobic degradation and metabolite formation kinetics of 17beta-estradiol-3-sulphate at three different incubation temperatures. The degradation of 17beta-estradiol-3-sulphate followed a first-order kinetic and the temperature dependence of the rate constants was sufficiently described by the Arrhenius equation. Degradation was different between the three investigated soils and the rate constants across the soils were significantly correlated to the arylsulphatase activity at 7.5 and 15 degrees C. Estrone-3-sulphate and 17beta-estradiol were identified as primary metabolites and estrone as a secondary metabolite. Results suggest arylsulphatase activity originating from soil microbial biomass is the main driver for the degradation of 17beta-estradiol-3-sulphate.     

Effects of improved spatial and temporal modeling of on-road vehicle emissions

Numerous emission and air quality modeling studies have suggested the need to accurately characterize the spatial and temporal variations in on-road vehicle emissions. The purpose of this study was to quantify the impact that using detailed traffic activity data has on emission estimates used to model air quality impacts. The on-road vehicle emissions are estimated by multiplying the vehicle miles traveled (VMT) by the fleet-average emission factors determined by road link and hour of day. Changes in the fraction of VMT from heavy-duty diesel vehicles (HDDVs) can have a significant impact on estimated fleet-average emissions because the emission factors for HDDV nitrogen oxides (NOx) and particulate matter (PM) are much higher than those for light-duty gas vehicles (LDGVs). Through detailed road link-level on-road vehicle emission modeling, this work investigated two scenarios for better characterizing mobile source emissions: (1) improved spatial and temporal variation of vehicle type fractions, and (2) use of Motor Vehicle Emission Simulator (MOVES2010) instead of MOBILE6 exhaust emission factors. Emissions were estimated for the Detroit and Atlanta metropolitan areas for summer and winter episodes. The VMT mix scenario demonstrated the importance of better characterizing HDDV activity by time of day, day of week, and road type. More HDDV activity occurs on restricted access road types on weekdays and at nonpeak times, compared to light-duty vehicles, resulting in 5-15% higher NOx and PM emission rates during the weekdays and 15-40% lower rates on weekend days. Use of MOVES2010 exhaust emission factors resulted in increases of more than 50% in NOx and PM for both HDDVs and LDGVs, relative to MOBILE6. Because LDGV PM emissions have been shown to increase with lower temperatures, the most dramatic increase from MOBILE6 to MOVES2010 emission rates occurred for PM2.5 from LDGVs that increased 500% during colder wintertime conditions found in Detroit, the northernmost city modeled.