Effects of coal-smoke pollutants from different sources on the growth, chlorophyll content, stem anatomy and cuticular traits of Euphorbia hirta L

Variations occurred in the growth, assimilate partitioning, chlorophyll content, stem anatomy and leaf cuticular traits of Euphorbia hirta L. on long-term exposure to coal-smoke pollutants prevailing at two sites, one situated close to a railway loco shed (site B) and another in the vicinity of a thermal power plant (site C). The Botanical Garden of Aligarh Muslim University, Aligarh, was considered as a control site (A). Site C possessed a greater load of coal-smoke pollutants than site B. The present study had shown that coal-smoke pollutants have led to a decrease in plant height, jeopardised the production of leaves and enhanced their fall, and caused a reduction in leaf area, leading to decreases of the total photosynthetic area of the plants, with increasing pollution load. The losses incurred in chlorophyll a were relatively more than chlorophyll b and, as a result, the total chlorophyll contents of leaves were decreased in polluted plants. The dry weights of stems, roots and leaves were decreased to different degrees, whereas the shoot/root dry weight ratio was found to increase in the polluted environment. The growth of stem cortex and pith were slightly affected on site B, but showed significant decreases on site C, due to a greater load of pollutants. Decreased area of xylem tissue was found to couple with an increasing number of vessels of reduced sizes. The stomatal density, pore size and index showed decreases, while the epidermal cells were larger and trichomes longer, on both surfaces of polluted leaves.     

Nondestructive characterization of municipal-solid-waste-contaminated surface soil by energy-dispersive X-ray fluorescence and low-Z (atomic number) particle electron probe X-ray microanalysis

The long-term environmental impact of municipal solid waste (MSW) landfilling is still under investigation due to the lack of detailed characterization studies. A MSW landfill site, popularly known as Dhapa, in the eastern fringe of the metropolis of Kolkata, India, is the subject of present study. A vast area of Dhapa, adjoining the current core MSW dump site and evolving from the raw MSW dumping in the past, is presently used for the cultivation of vegetables. The inorganic chemical characteristics of the MSW-contaminated Dhapa surface soil (covering a 2-km stretch of the area) along with a natural composite (geogenic) soil sample (from a small countryside farm), for comparison, were investigated using two complementary nondestructive analytical techniques, energy-dispersive X-ray fluorescence (EDXRF) for bulk analysis and low-Z (atomic number) particle electron probe X-ray microanalysis (low-Z particle EPMA) for single-particle analysis. The bulk concentrations of K, Rb, and Zr remain almost unchanged in all the soil samples. The Dhapa soil is found to be polluted with heavy metals such as Cu, Zn, and Pb (highly elevated) and Ti, Cr, Mn, Fe, Ni, and Sr (moderately elevated), compared to the natural countryside soil. These high bulk concentration levels of heavy metals were compared with the Ecological Soil Screening Levels for these elements (U.S. Environment Protection Agency) to assess the potential risk on the immediate biotic environment. Low-Z particle EPMA results showed that the aluminosilicate-containing particles were the most abundant, followed by SiO2, CaCO3-containing, and carbonaceous particles in the Dhapa samples, whereas in the countryside sample only aluminosilicate-containing and SiO2 particles were observed. The mineral particles encountered in the countryside sample are solely of geogenic origin, whereas those from the Dhapa samples seem to have evolved from a mixture of raw dumped MSW, urban dust, and other contributing factors such as wind, precipitation, weather patterns, farming, and water logging, resulting in their diverse chemical compositions and the abundant observation of carbonaceous species. Particles containing C and P were more abundant in the Dhapa samples than in the countryside soil sample, suggesting that MSW-contaminated soils are more fertile. However, the levels of particles containing potentially toxic heavy metals such as Cr, Mn, Ni, Cu, Zn, and/or Pb in the Dhapa samples were significant, corroborated by their high bulk concentration levels (EDXRF), causing deep concern for the immediate environment and contamination of the food chain through food crops.     

Cadmium accumulation in and tolerance of rice (Oryza sativa L.) varieties with different rates of radial oxygen loss

Cadmium (Cd) uptake and tolerance were investigated among 20 rice cultivars based on a field experiment (1.2 mg Cd kg⁻¹ in soil) and a soil pot trial (control, 100 mg Cd kg⁻¹), and rates of radial oxygen loss (ROL) were measured under a deoxygenated solution. Significant differences were found among the cultivars in: (1) brown rice Cd concentrations (0.11-0.29 mg kg⁻¹) in a field soil, (2) grain Cd tolerance (34-113%) and concentrations (2.1-6.5 mg kg⁻¹) in a pot trial, and (3) rates of ROL (15-31 mmol O₂ kg⁻¹ root d.w. h⁻¹). Target hazard quotients were calculated for the field experiment to assess potential Cd risk. Significant negative relationships were found between rates of ROL and concentrations of Cd in brown rice or straw under field and greenhouse conditions, indicating that rice cultivars with higher rates of ROL had higher capacities for limiting the transfer of Cd to rice and straw.     

Simultaneous analysis of free and sulfo-conjugated steroid estrogens in artificial urine solution and agricultural soils by high-performance liquid chromatography

A simple and robust analytical method was developed to simultaneously detect and quantify 17β-estradiol (E2), estrone (E1), 17β-estradiol-3-sulphate (E2-3S), and estrone-3-sulphate (E1-3S) in aqueous solutions (calcium chloride and artificial urine solutions) and agricultural soils using high performance liquid chromatography and UV detection. The standards for all four compounds were linear in the range of 0.01 to 1.0 μg mL(-1) (n = 6) and 1.0 to 20 μg mL(-1) (n = 6), respectively, with correlation coefficients > 0.999. The on-column limits of detection at an injection volume of 50 μL and S/N (signal: noise) ratio of 3 were: 9.0 ng mL(-1), 10 ng mL(-1), 5.0 ng mL(-1), and 7.0 ng mL(-1) for E2-3S, E1-3S, E2 and E1, respectively. The limit of detection and quantification in artificial urine solution and CaCl(2) solution was 1.0 ng mL(-1) for all four compounds. Method detection limits for the compounds in the 3 soils ranged from 2 to 2.4 ng g(-1) (E2-3S and E1-3S), and 1.0 to 2.9 ng g(-1) (E2 and E1), respectively.     

Unusual polar metabolites in the groundwater of a contaminated waste site indicate a new pathway of mononitrotoluene transformation

At a mononitrotoluene-contaminated waste disposal site, the groundwater was screened for polar transformation products of mononitrotoluenes, by means of HPLC-MS, HPLC-NMR and further off-line NMR and MS techniques. Besides expected metabolites such as aminotoluenes (ATs) and nitrobenzoic acids (NBAs), three unknowns (di- and tetrahydro-derivatives of (2-oxo-quinolin-3-yl) acetic acid) could be identified which, in the context of explosives and related compounds, are new metabolites. Evidence could be provided by microcosm experiments with 2-nitrotoluene (2-NT) that these metabolites are microbial transformation products of 2-NT under anaerobic conditions. The NMR and MS data are presented and the possible pathway for the formation of these metabolites after addition of 2-NT to fumarate is discussed.     

Development of a field test method to evaluate gaseous air cleaner performance in a multizone building

The performance of gaseous air cleaners for commercial and residential buildings has typically been evaluated using test protocols developed for a controlled laboratory chamber or a test duct. It is currently unknown how laboratory measurements relate to the actual performance of an air cleaner installed in a real building. However, to date, there are no air cleaner field test protocols available, thereby limiting the existing field data. The National Institute of Standards and Technology (NIST) has conducted a series of experiments to support test procedure development for evaluating the installed performance of gaseous air cleaning equipment, as well as metrics for characterizing field performance. To date, over 100 experiments have been completed, of which 23 portable air cleaner experiments and 6 in-duct air cleaner experiments are described in this paper. Tests were conducted in a finished three-bedroom/two-bathroom manufactured house equipped with several gas chromatographs to semi-continuously measure air change rates and volatile organic compound concentrations. Experimental variables included air cleaner location, isolation of zones by closing doors, and contaminant source location. For each experiment, air cleaner removal of decane was directly measured using the air cleaner inlet and outlet concentrations, as well as with mass balance analyses using measured room concentrations. With a verified mass balance model, a field performance metric was developed to compare installed whole-building performance to the performance predicted by a laboratory result. The results provide insight into the protocols and metrics that might prove useful for characterizing the field performance of air cleaners as well as the impact of air cleaner removal on zonal concentration levels in a variety of situations.     

Determination of nickel, copper, zinc and lead in human scalp hair in Syrian occupationally exposed workers by total reflection X-ray fluorescence

In this study, an attempt has been made to study methane flux and quantification of heavy metals from Municipal Solid Waste (MSW) landfill areas of selected cities in India. During the period of study, the average value of methane flux was estimated from these landfill areas varied from 146–454 mg/m2/h. Methane emission from landfill is of serious environmental global concern as it accounts for approximately 15 percentages of current Greenhouse gas emissions. It has been estimated that methane emission, from landfill areas in the world, in next two decades would be same as that what is emitted from paddy fields presently. Besides, the estimation of methane flux, quantification of some heavy metals was conducted to analyse the suitability of using MSW as compost. The average values for metals were observed to be both within the range of USEPA and Indian standards for MSW disposal in landfill areas and to be used as compost respectively.     

Congener profiles of polychlorinated biphenyls in core sediments of Sunderban mangrove wetland (N.E. India) and their ecotoxicological significance

The paper presents the first comprehensive survey of congener profiles of polychlorinated biphenyls (PCBs) in core sediment samples (<63 microm particle size) covering seven sites in Sunderban mangrove Wetland, north-eastern part of the Bay of Bengal. Results pointed out a non-homogenous contamination of the wetland with Sigma23PCB values ranging from 0.5 to 26.9 ng g(-1) dry weight, reflecting very low to moderate contamination closely in conformity to other Asian coastal environment. The general decreasing order of the dominant congeners to the total load was: CB138 > 153 > 149 > 101, indicating the predominance of hexa-chlorinated congeners. The spatial distribution revealed significant differences in concentration related to local urbanization with industrial and land-based sources. No uniform temporal trend on PCB levels was recorded probably due to particular hydrological characteristics of the wetland and/or non-homogenous inputs from point sources. Strong positive correlations between the seven dominant congeners suggest their common sources and similar environmental behaviors. These results were also used for a risk assessment evaluation in the Sunderban wetland, showing that the present PCB levels were exceeding in few cases the lower limit of sediment quality guidelines of Environmental Protection Agency and Canadian Council of Ministers of the Environment.     

Influence of coal-based thermal power plants on the spatial–temporal variability of tropospheric NO<Subscript><Emphasis Type="Bold">2</Emphasis></Subscript> column over India

The oxides of nitrogen—NO _x (NO and NO₂)—are an important constituent of the troposphere. The availability of relatively higher spatial (0.25° grid) and temporal (daily) resolution data from ozone monitoring instrument (OMI) onboard Aura helps us to better differentiate between the point sources such as thermal power plants from large cities and rural areas compared to previous sensors. The annual and seasonal (summer and winter) distributions shows very high mean tropospheric NO₂ in specific pockets over India especially over the Indo-Gangetic plains (up to 14.2 × 10¹⁵ molecules/cm²). These pockets correspond with the known locations of major thermal power plants. The tropospheric NO₂ over India show a large seasonal variability that is also observed in the ground NO₂ data. The multiple regression analysis show that the influence of a unit of power plant (in gigawatts) over tropospheric NO₂ (×10¹⁵ molecules/cm²) is around ten times compared to a unit of population (in millions) over India. The OMI data show that the NO₂ increases by 0.794 ± 0.12 (×10¹⁵ molecules/cm²; annual) per GW compared to a previous estimate of 0.014 (×10¹⁵ molecules/cm²) over India. The increase of tropospheric NO₂ per gigawatt is found to be 1.088 ± 0.18, 0.898 ± 0.14, and 0.395 ± 0.13 (×10¹⁵ molecules/cm²) during winter, summer, and monsoon seasons, respectively. The strong seasonal variation is attributed to the enhancement or suppression of NO₂ due to various controlling factors which is discussed here. The recent increasing trend (2005–2007) over rural thermal power plants pockets like Agori and Korba is due to recent large capacity additions in these regions.     

Sensitivity analysis of water quality for Delhi stretch of the River Yamuna,India

Simulation models are used to aid the decision makers about water pollution control and management in river systems. However, uncertainty of model parameters affects the model predictions and hence the pollution control decision. Therefore, it often is necessary to identify the model parameters that significantly affect the model output uncertainty prior to or as a supplement to model application to water pollution control and planning problems. In this study, sensitivity analysis, as a tool for uncertainty analysis was carried out to assess the sensitivity of water quality to (a) model parameters (b) pollution abatement measures such as wastewater treatment, waste discharge and flow augmentation from upstream reservoir. In addition, sensitivity analysis for the “best practical solution” was carried out to help the decision makers in choosing an appropriate option. The Delhi stretch of the river Yamuna was considered as a case study. The QUAL2E model is used for water quality simulation. The results obtained indicate that parameters K ₁ (deoxygenation constant) and K ₃ (settling oxygen demand), which is the rate of biochemical decomposition of organic matter and rate of BOD removal by settling, respectively, are the most sensitive parameters for the considered river stretch. Different combinations of variations in K ₁ and K ₂ also revealed similar results for better understanding of inter-dependability of K ₁ and K ₂. Also, among the pollution abatement methods, the change (perturbation) in wastewater treatment level at primary, secondary, tertiary, and advanced has the greatest effect on the uncertainty of the simulated dissolved oxygen and biochemical oxygen demand concentrations.