Root growth responses of Anagallis arvensis L., primulaceae to air pollution

The root growth response to air pollution in populations of Anagallis arvensis growing about 0.5, 2, 6, 12 and 20 km leeward from a power plant complex varied with the level of pollution, age of the stand and meteorological conditions. The roots were more affected by the pollutants at a young stage and the loss in net primary productivity was proportional to the pollution level. The populations up to 2 km from the source of pollution completed their life cycle quickly. The coal consumption rate at the power plant, relative humidity, wind direction and other environmental factors were found to influence the degree of growth response to air pollution.     

Insecticide residues in cotton crop soil

Dimethoate, monocrotophos, triazophos, deltamethrin, cypermethrin and endosulfan were applied to a cotton crop soil located at Nurpur village, Punjab, India. The insecticides were applied sequentially at recommended dosages in cotton fields by foliar application in 1995, 1996 and 1998. Soil samples were collected from the cotton crop farms and extracted with acetone. The extracted material was analysed by a gas liquid chromatograph (GLC) equipped with an 63Ni electron-capture detector (ECD-63Ni). Recovery data was obtained by fortifying soil with insecticide. The average recoveries from the fortified soil samples were 76-92% for organophosphorous compounds and 90-98% for synthetic pyrethroids and organochlorines. The results showed that the insecticide residues under study were present in the range of 1.16 to 41.97 ng g(-1) d.wt.soil. The pattern of dissipation of the insecticides used was similar for the duration of the crop. Half lives of the insecticides ranged from 7 to 22 days. Except endosulfan none of the other insecticides used were leached below 15 cm. Endosulfan was found to be rapidly degraded in the soil and formed a sulfate metabolite. Persistence and dissipation pattern in soils with history of exposure to the insecticide compared to non-history soils were similar.     

Adsorbent selection for endosulfan removal from water environment

In the present study, an attempt was made to select a low cost adsorbing material for the removal of endosulfan [C,C'-(1,4,5,6,7,7-hexachloro-8,9,10- trinorborn-5-en-2,3-ylene)(dimethylsulphite)] from water. Various low cost adsorbents like wood charcoal, kimberlite tailings, silica, macro fungi sojar caju were tried with activated charcoal as reference material. The above materials were selected from various sources encompassing organic, inorganic, clayey, and biological sources. For the selection of suitable adsorbent for endosulfan uptake, maximum adsorption capacity (Qmax) was chosen as the parameter. Kinetic profiles of removal were generated for all the materials to assess the equilibrium time. Equilibrium studies were carried out for all materials to assess the adsorption equilibrium model that they followed. The model that gave the best correlation coefficient by linear regression analysis, was adopted for the calculation of Qmax of the corresponding adsorbent material. Using linearised forms of equilibrium models like Langmuir, BET, and Freundlich, maximum adsorptive capacities were determined. Activated charcoal showed the best adsorptive capacity with Qmax of 2.145 mg/g followed by wood charcoal 1.773 mg/g, sojar caju 1.575 mg/g, kimberlite tailings 0.8821 mg/g, and silica 0.3231 mg/g. Albeit activated charcoal gave better performance, it was not considered as a candidate material because of its high cost. Wood charcoal was the next best adsorbent with Qmax 1.773 mg/g. Therefore, wood charcoal was chosen as the best material for endosulfan removal. The study of physical and chemical characteristics of wood charcoal revealed that it is a potential adsorbent and can even be improved further.     

Study on the fluorescence characteristics of bromadiolone in aqueous and organized media and application in analysis

The fluorescence spectroscopic behavior of bromadiolone (anticoagulant rodenticide), a substituted 4-hydroxycoumarin derivative, was investigated in water and in organized media like micelles and cyclodextrins. A detailed study on various photophysical parameters like fluorescence intensity (I_F), quantum yield (), lifetime (τ) and steady state fluorescence anisotropy (r) of bromadiolone in aqueous and in organized media was carried out. Bromadiolone in aqueous solution was observed to be in an aggregated state, thereby showing weak emission due to self-quenching. Marked enhancement of fluorescence intensity was observed in organized media like micelles and β-cyclodextrin. A preliminary investigation has been done to find out whether this enhancement of fluorescence can be used to develop a sensitive analytical method for determination of bromadialone in aqueous media. A linear relationship between the fluorescence intensity and concentration of bromadiolone was observed in the range of 0.15–7.9 μg ml⁻¹ in cetyltrimethylammonium bromide (CTAB) and 0.5–26.4 μg ml⁻¹ in β-cyclodextrin medium. The lower detection limit was found to be 37 ng ml⁻¹ in presence of CTAB and 23 ng ml⁻¹ in β-cyclodextrin. Comparison with 4-hydroxycoumarin, an unsubstituted analogue, was made.     

Assessment of urban air pollution and it's probable health impact

The present study deals with the quantitative effect of vehicular emission on ambient air quality during May 2006 in urban area of Lucknow city. In this study SPM, RSPM, SO2, NOx and 7 trace metals associated with RSPM were estimated at 10 representative locations in urban area and one village area for control. Beside this, air quality index (AQI), health effects of different metals and mortality were assessed. The 24 hr average concentration of SPM, RSPM, SO2 and NOx was found to be 382.3, 171.5, 24.3 and 33.8 microg m(-3) respectively in urban area and these concentrations were found to be significantly (p < 0.01) higher by 94.8, 134.8, 107.4 and 129.6% than control site respectively The 24 hr mean of SPM and RSPM at each location of urban area were found to be higher than prescribed limit of National Ambient Air Quality Standard (NAAQS) except SPM for industrial area. The 24 hr mean concentration of metals associated with RSPM was found to be higher than the control site by 52.3, 271.8, 408.9, 75.81, 62.7, 487.54 and 189.5% for Fe, Cu, Pb, Zn, Ni, Mn and Cr respectively. The inter correlation of metals Pb with Mn, Fe and Cr; Zn with Ni and Cr; Ni with Cr; Mn with Fe and Cu with Cr showed significant positive relation either at p < 0.05 or p < 0.01 level. Metals Pb, Mn and Cr (p < 0.01) and Cu (p < 0.05) showed significant positive correlation with RSPM. These results indicate that ambient air quality in the urban area is affected adversely due to emission and accumulation of SPM, RSPM, SO2, NOx and trace metals. These pollutants may pose detrimental effect on human health, as exposure of these are associated with cardiovascular and respiratory diseases, neurological impairments, increased risk of preterm birth and even mortality and morbidity.     

Estimation of radon exhalation rate, natural radioactivity and radiation doses in fly ash samples from Durgapur thermal power plant, West Bengal, India

Coal and its by products often contain significant amounts of radionuclides, including uranium which is the ultimate source of the radioactive gas radon. Burning of coal and the subsequent emission to the atmosphere cause the re-distribution of toxic trace elements in the environment. Due to considerable economic and environmental importance and diverse uses, the collected fly ash has become a subject of worldwide interest in recent years. In the present study, radon exhalation rate and the activity concentration of (238)U, (232)Th and (40)K radionuclides in fly ash samples from Durgapur thermal power plant (WB) have been measured by "Sealed Can technique" using LR-115 type II detectors and a low level NaI (Tl) based gamma ray spectrometer, respectively. Radon exhalation rate varied from 360.0 to 470.0 mBq m(-2)h(-1) with an average value of 406.8 mBq m(-2)h(-1). Activity concentrations of (238)U ranged from 84.8 to 126.4 Bq kg(-1) with an average value of 99.3Bqkg(-1), (232)Th ranged from 98.1 to 140.5 Bq kg(-1) with an average value of 112.9 Bq kg(-1) and (40)K ranged from 267.1 to 364.9 Bq kg(-1) with an average value of 308.9 Bq kg(-1). Radium equivalent activity obtained from activity concentrations is found to vary from 256.5 to 352.8 Bq kg(-1) with an average value of 282.5 Bq kg(-1). Absorbed gamma dose rates due to the presence of (238)U, (232)Th and (40)K in fly ash samples vary in the range 115.3-158.5 nGy h(-1) with an average value of 126.4 nGy h(-1). While the external annual effective dose rate varies from 0.14 to 0.19 mSv y(-1) with an average value of 0.15 mSv y(-1), effective dose equivalent estimated from exhalation rate varies from 42.5 to 55.2 microSv y(-1) with an average value of 47.8 microSv y(-1). Values of external hazard index H(ex) for the fly ash samples studied in this work range from 0.69 to 0.96 with a mean value of 0.77.     

Assessing possible visitor-use impacts on water quality in Yosemite National Park, California

There is concern that visitor-use associated activities, such as bathing, dish washing, wastewater production, and stock animal use near lakes and streams, could cause degradation of water quality in Yosemite National Park. A study was conducted during 2004-2007 to assess patterns in nutrient and Escherichia coli (E. coli) concentrations in the Merced and Tuolumne Rivers and characterize natural background concentrations of nutrients in the park. Results indicated that nutrient and E. coli concentrations were low, even compared to other undeveloped sites in the United States. A multiple linear regression approach was used to model natural background concentrations of nutrients, with basin characteristics as explanatory variables. Modeled nitrogen concentrations increased with elevation, and modeled phosphorus concentrations increased with basin size. Observed concentrations (±uncertainty) were compared to modeled concentrations (±uncertainty) to identify sites that might be impacted by point sources of nutrients, as indicated by large model residuals. Statistically significant differences in observed and modeled concentrations were observed at only a few locations, indicating that most sites were representative of natural background conditions. The empirical modeling approach used in this study can be used to estimate natural background conditions at any point along a study reach in areas minimally impacted by development, and may be useful for setting water-quality standards in many national parks.     

Water and sediment quality of dry season pools in a dryland river system: the upper Leichhardt River, Queensland, Australia

This article presents the geochemical characteristics and physicochemical properties of water and sediment from twelve semi-permanent, dryland pools in the upper Leichhardt River catchment, north-west Queensland, Australia. The pools were examined to better understand the quality of sediments and temporary waters in a dryland system with a well-established metal contamination problem. Water and sediment sampling was conducted at the beginning of the hydroperiod in May and September 2007. Water samples were analyzed for major solute compositions (Ca, Na, K, Mg, Cl, SO(4), HCO(3)) and water-soluble (operationally defined as the <0.45 μm fraction) metals (Cd, Cu, Pb, Zn). Sediment samples were analyzed for total extractable and bioaccessible metals (As, Cd, Cu, Pb, Zn), elemental composition and grain morphology. At the time of sampling a number of pools contained water and sediment with elevated concentrations, compared to Australian regulatory guidelines, of Cu (maximum: water 28 μg L(-1); sediment 770 mg kg(-1)), Pb (maximum: water 3.4 μg L(-1); sediment 630 mg kg(-1)) and Zn (maximum: water 150 μg L(-1); sediment 780 mg kg(-1)). Concentrations of Cd and As in pools were relatively low and generally within Australian regulatory guideline values. Localized factors, such as the interaction of waters with anthropogenic contaminants from modern and historic mine wastes (i.e. residual smelter and slag materials), exert influence on the quality of pool waters. Although the pools of the upper Leichhardt River catchment are contaminated, they do not appear to be the primary repository of water and sediment associated metals when compared to materials in the remainder channel and floodplain. Nevertheless, a precautionary approach should be adopted to mitigating human exposure to contaminated environments, which might include the installation of appropriate warning signs by local health and environmental authorities.     

Effect of ambient air sulphur dioxide on sulphate accumulation in plants

Present study deals with the relationship between ambient air sulphurdioxide and sulphate content in leaf of selected tropical plant species, Ficus religiosa. The study reveals a positive correlation between ambient air sulphur dioxide and sulphate in the leaves. Two way ANOVA finds the obtained values to be highly significant (p < 0.001). Amount of sulphate in leaves shows positive correlation with sulphur dioxide in air (p < 0.001) during most part of the study A marked reduction of sulphate content in leaf was found during October when reduction in ambient air sulphur dioxide was recorded.     

Histoenzymological study on the toxicity of copper sulphate in the digestive glands of Lymnaea luteola

During 24 and 48 hr of exposure, the digestive glands of Lymnaea treated with a lethal concentration of 0.038 mgl(-1) CuSO4 revealed intense activity of acid phosphatase in perilobular margin. On the other hand, same area of the gland showed moderate activity of ATPase during 24 and 48 hr of exposure. However, alkaline phosphatase showed average activity in perialveolar region and perilobular margin during 24 and 48, and 72 hr of exposure respectively The changes in the activity of these enzymes were nonsignificant in alveolar margin and perialveolar region of the gland. It is interesting to note moderate activity of acid phosphatase in perialveolar region during 24 hr of exposure.