Active capping demonstration in the Anacostia river,Washington, D.C.

An active capping demonstration project in Washington, D.C., is testing the ability to place sequestering agents on contaminated sediments using conventional equipment and evaluating their subsequent effectiveness relative to conventional passive sand sediment caps. Selected active capping materials include: (1) AquaBlokTM, a clay material for permeability control; (2) apatite, a phosphate mineral for metals control; (3) coke, an organic sequestration agent; and (4) sand material for a control cap. All of the materials, except coke, were placed in 8,000‐ft test plots by a conventional clamshell method during March and April 2004. Coke was placed as a 1.25‐cm layer in a laminated mat due to concerns related to settling of the material. Postcap sampling and analysis were conducted during the first, sixth, and eighteenth months after placement. Although postcap sampling is expected to continue for at least an additional 24 months, this article summarizes the results of the demonstration project and postcap sampling efforts up to 18 months. Conventional clamshell placement was found to be effective for placing relatively thin (six‐inch) layers of active material. The viability of placing high‐value or difficult‐to‐place material in a controlled manner was successfully demonstrated with the laminated mat. Postcap monitoring indicates that all cap materials effectively isolated contaminants, but it is not yet possible to differentiate between conventional sand and active cap layer performance. Monitoring of the permeability control layer indicated effective reductions in groundwater seepage rates through the cap, but also showed the potential for gas accumulation and irregular release. All of the cap materials show deposition of new contaminated sediment onto the surface of the caps, illustrating the importance of source control in maintaining sediment quality. © 2006 Wiley Periodicals, Inc.     

Attitudes towards sex selection for non-medical reasons: a review

Early non-invasive fetal sexing is widely available over the Internet, leading to concerns about its possible use for sex selection. The aim of this review is to summarise the results of surveys describing lay attitudes towards sex selection for non-medical reasons to help address or inform such concerns. A search of electronic databases and key journals was supplemented by an Internet search and citation-tracking. Twenty-one quantitative studies were identified. Most were conducted in the US, with five recent studies in the UK and Germany. Most studies found that, overall, people were not in favour of sex selection. However, this varied from 94 to 18%. People may hold more negative attitudes when the method of sex selection is specified, particularly if this involves termination of pregnancy (TOP). Attitudes towards the general availability of sex selection are less negative than those towards personal use. Attitudes were consistently negative in German surveys. Little is known of such attitudes outside the US, the UK and Germany, and how such attitudes may change as new sex selection technologies become available. Studies of use of early non-invasive fetal sexing for sex selection for non-medical reasons are needed to assess the extent to which concerns about usage are justified and to assist in debates on how these might be most appropriately addressed. Copyright © 2006 John Wiley & Sons, Ltd.     

Decision support systems for stored water quality: 2. An example application

The components of an environmental decision support system (EDSS) were outlined in Part 1 of this paper. Here, an example application is given using a range of data from the database in order to assess the utility of one specific model chosen from the modelbase: the one-dimensional thermal stratification model, EDD1. The model is applied to a range of lake types worldwide.     

Tolerance of calluna vulgaris and peatland plant communities to sulphuric acid deposition

Critical loads offer a unique way of evaluating impacts of acid deposition by quantifying environmental sensitivity. The critical loads of acidity for UK peat soils have been based upon an arbitrary reduction in pH of 0.2 units. This chemical shift needs to be better related to adverse effects on sensitive biological receptors. It is known that effective precipitation pH equates closely to soil solution pH, and the latter is directly linkable to biotic effects of pH change. On continuation of a long-term experiment assessing impacts of simulated acid rain on peat microcosms in a realistic outdoor environment, Calluna vulgaris continued to flourish at acid deposition loads well above the existing critical load. Calluna plants were harvested and analysed, and acid deposition treatments to the microcosms continued to allow natural vegetation to regenerate. A diverse mixture of moorland plants and bryophytes established at acidity treatments well above the existing critical load, and only a very high acid load resulted in no natural regeneration. A critical effective rain pH value of 3.6 is suggested as a basis for setting critical loads. At this pH, Calluna grows well, and a healthy diverse vegetation community re-establishes when harvested. It is suggested that the peat critical load should be set at the acid load that, at any specific site, would result in a mean effective precipitation pH of 3.6.     

Methodological Basis of Ecological Safety Standards for the Technogenic Impact of Mineral Resource Exploitation

A new methodological approach to the development of biological and technological safety standards for the impact of underground mining on the natural biota is proposed.     

Plant communities in the zone of gas field development and heavy metal accumulation by them

Heavy metal accumulation by plant communities has been studied in different zones of impact of gas field development. The contents of heavy metals in different blocks of plant communities has proved to depend not only on the location of phytocenosis but also on its species composition. Communities dominated by species of the family Poaceae contain smaller amounts of heavy metals than those dominated by species of the family Asteraceae, especially of the genus Artemisia. The order of precedence in the accumulation of heavy metals in different blocks of plant communities has been revealed.