Effect of ethylenediamine-N,N′-disuccinic acid on Fenton and photo-Fenton processes using goethite as an iron source: optimization of parameters for bisphenol A degradation

The main disadvantage of using iron mineral in Fenton-like reactions is that the decomposition rate of organic contaminants is slower than in classic Fenton reaction using ferrous ions at acidic pH. In order to overcome these drawbacks of the Fenton process, chelating agents have been used in the investigation of Fenton heterogeneous reaction with some Fe-bearing minerals. In this work, the effect of new iron complexing agent, ethylenediamine-N,N'-disuccinic acid (EDDS), on heterogeneous Fenton and photo-Fenton system using goethite as an iron source was tested at circumneutral pH. Batch experiments including adsorption of EDDS and bisphenol A (BPA) on goethite, H₂O₂ decomposition, dissolved iron measurement, and BPA degradation were conducted. The effects of pH, H₂O₂ concentration, EDDS concentration, and goethite dose were studied, and the production of hydroxyl radical (^?OH) was detected. The addition of EDDS inhibited the heterogeneous Fenton degradation of BPA but also the formation of ^?OH. The presence of EDDS decreases the reactivity of goethite toward H₂O₂ because EDDS adsorbs strongly onto the goethite surface and alters catalytic sites. However, the addition of EDDS can improve the heterogeneous photo-Fenton degradation of BPA through the propagation into homogeneous reaction and formation of photochemically efficient Fe-EDDS complex. The overall effect of EDDS is dependent on the H₂O₂ and EDDS concentrations and pH value. The high performance observed at pH 6.2 could be explained by the ability of O ₂ ^?? to generate Fe(II) species from Fe(III) reduction. Low concentrations of H₂O₂ (0.1 mM) and EDDS (0.1 mM) were required as optimal conditions for complete BPA removal. These findings regarding the capability of EDDS/goethite system to promote heterogeneous photo-Fenton oxidation have important practical implications for water treatment technologies.     

The impact of the waterborne transmission of Toxoplasma gondii and analysis efforts for water detection: an overview and update

The ubiquitous protozoa Toxoplasma gondii is now the subject of renewed interest, due to the spread of oocysts via water causing waterborne outbreaks of toxoplasmosis in different parts of the world. This overview discusses the different methods for detection of Toxoplasma in drinking and environmental water. It includes a combination of conventional and molecular tools for effective oocyst recovery and detection in water sources as well as factors hindering the detection of this parasite and shedding light on a promising new molecular assay for the diagnosis of Toxoplasma in environmental samples. Hopefully, this attempt will facilitate future approaches for better recovery, concentration, and detection of Toxoplasma oocysts in environmental waters.     

Carbon Monoxide in an Urban Environment: Application of a Receptor Model for Source Apportionment

During the winter of 1985-86 the authors took 6-h integrated air samples and measured the concentrations of carbon monoxide and other gases at a residential site in Olympia, Washington. The 6-h average concentrations were between about 0.2 and 3.2 ppmv. For each 6-h period the observed concentration of CO was apportioned among its sources which were residential wood burning and automobiles. Small and generally insignificant amounts of CO were also observed from unidentified sources. A chemical mass balance (CMB) was formulated and applied to apportion the observed CO among its sources. Methylchloride (CH₃CI), in excess of background levels, was used as a unique tracer of wood burning and excess hydrogen (H₂) served as a tracer of CO from automobiles. The source emission factors to carry out the calculations were estimated from other experiments. The results showed that in Olympia, wood burning can often contribute as much CO as automobiles during winter. The maximum 6-h average contribution of CO from wood burning was about 2 ppmv and from automobiles it was 2.2 ppmv, and the average ambient concentration was about 1 ppmv. When pollution from wood burning was present, it contributed 0.5 ppmv on average while automobiles also contributed 0.5 ppmv. Unidentified sources contributed 0.1 ppmv and the background level was 0.15 ppmv. During the winter many times wood burning did not affect CO concentrations, while CO from automobiles was always present. On average, during the winter, automobiles contributed some 50 percent of the CO mass to the lower urban atmosphere and wood burning contributed about 30 percent. Diurnal cycles became evident in the calculated concentrations of CO from wood burning and automobiles even though the measured concentrations did not show strong diurnal variations. Wood burning contributed most during evening and nighttime and very little during the day, while automobiles contributed most during the morning and evening hours and very little at night. These patterns lend support to the accuracy of the model and source emission factors since they are as expected from the diurnal variations of the sources and atmospheric mixing.     

Dielectric and Material Properties of Poly (Vinyl Alcohol): Based Modified Red Mud Polymer Nanocomposites

Red mud emerges as the major waste material during production of alumina from bauxite by the Bayer??s process. Based on economics as well as environmental related issues, enormous efforts have been directed worldwide towards red mud management issues i.e. of utilization, storage and disposal. The present research work has been undertaken with an objective to explore the use of red mud as a reinforcing material in the polymer matrix as a low cost option. The silicate layered red mud was organophilized by aniline formaldehyde and to know the effect of various filler loading on the material properties of PVA-organophilized red mud composites, prepared by a conventional solvent casting technique and comparison of the same with that of the virgin poly (vinyl alcohol) (PVA), various characterizations was done. The modified red mud was typically characterized by X-ray diffraction. The X-ray diffraction pattern of the composite materials was also studied. The morphological image of the composite materials was studied by scanning electron microscopy (SEM). Transmission electron microscopy (TEM) was used to characterize the dispersion of the red mud within the composite materials. The surface topography of the composite materials was studied by Atomic Force Microscopy (AFM). The dielectric properties of composite materials were investigated in wide frequency ranges from 1?MHz to 1?GHz.     

Environmental protection and energy efficiency improvement by using natural gas fuel in maritime transportation

Environmental Science and Pollution Research - Emissions from vessels are a major environmental concern because of their impacts on the deterioration of the environment, especially global warming...     

Characterization of cytotoxicity of airborne particulates from urban areas of Lahore

A number of species (organic and inorganic) in airborne particulates cause the toxicity to living being. The potential of in vitro test methods were explored for toxicity assessment of trace toxic elements (inorganic species) present in ambient air on human being (lungs). A year long sampling of airborne particles (PM_2.5) was carried (April 2008 to March 2009) in Lahore, Pakistan. A total of thirty nine samples were collected on 47 mm Zefluor Teflon filter membranes and each was analysed to characterize for the elements: Sb, As, Be, Cd, Cr, Co, Pb, Mn, Hg using ICP-MS in water extract and total acid digestate. The samples cytotoxicity was also established using lung derived cells and MTS colorimetric assays. This generated dose response curves and IC₅₀ values for the elemental mixtures identified on the Teflon filter membrane. The results indicated that even at low concentrations airborne elemental mixtures displayed an additive toxic effect.     

Organ targeted prenatal gene therapy—how far are we?

Prenatal gene therapy aims to deliver genes to cells and tissues early in prenatal life, allowing correction of a genetic defect, before long-term tissue damage has occurred. In contrast to postnatal gene therapy, prenatal application can target genes to a large population of dividing stem cells, and the smaller fetal size allows a higher vector-to-target cell ratio to be achieved. Early-gestation delivery may allow the development of immune tolerance to the transgenic protein which would facilitate postnatal repeat vector administration if needed. Targeting particular organs will depend on manipulating the vector to achieve selective tropism and on choosing the most appropriate gestational age and injection method for fetal delivery. Intra-amniotic injection reaches the skin, and other organs that are bathed in the fluid however since gene transfer to the lung and gut is usually poor more direct injection methods will be needed. Delivery to the liver and blood can be achieved by systemic delivery via the umbilical vein or peritoneal cavity. Gene transfer to the central nervous system in the fetus is difficult but newer vectors are available that transduce neuronal tissue even after systemic delivery. Copyright © 2011 John Wiley & Sons, Ltd.