The Cost of Stack Gas Cleaning in New York State

A cost estimating methodology has been applied to an emission point inventory to estimate the capital and operating costs of stack gas cleaning in the manufacturing sector of New York State. The study represents the first major attempt to estimate control costs on a source by source basis for a large region. The various control cost components are presented for each of the twenty manufacturing industry groups and the usefulness of the estimates for an abatement planning model is outlined.

In recent years a number of heroic efforts have been made to estimate the cost of air pollution abatement on a national or regional basis. Unfortunately, these studies have relied almost entirely upon emission factors, cost engineering functions, pilot plant operations, and average or ideal firms, because of the paucity of primary data.^1-6

In the estimates of capital and operating costs presented below, an attempt has been made to improve on previous research by making extensive use of primary data. The data were taken from an emission inventory of over 20,000 sources of air contamination in New York State. A cost estimating methodology was applied to engineering parameters of existing control operations on a source by source basis. The results have been aggregated to the two-digit SIC level.     

Compositions and greenhouse gas emission factors of flared and vented gas in the Western Canadian Sedimentary Basin

A significant obstacle in evaluating mitigation strategies for flaring and venting in the upstream oil and gas industry is the lack of publicly available data on the chemical composition of the gas. This information is required to determine the economic value of the gas, infrastructure and processing requirements, and potential emissions or emissions credits, all of which have significant impact on the economics of such strategies. This paper describes a method for estimating the composition of solution gas being flared and vented at individual facilities, and presents results derived for Alberta, Canada, which sits at the heart of the Western Canadian Sedimentary Basin. Using large amounts of raw data obtained through the Alberta Energy Resources Conservation Board, a relational database was created and specialized queries were developed to link production stream data, raw gas samples, and geography to create production-linked gas composition profiles for approximately half of the currently active facilities. These were used to create composition maps for the entire region, to which the remaining facilities with unknown compositions were geographically linked. The derived data were used to compute a range of solution gas composition profiles and greenhouse gas emission factors, providing new insight into flaring and venting in the region and enabling informed analysis of future management and mitigation strategies.

Implications: Accurate and transparent determination of environmental impacts of flaring and venting of gas associated with oil production, and potential benefits of mitigation, is severely hampered by the lack of publicly available gas composition data. In jurisdictions within the Western Canadian Sedimentary Basin, frameworks exist for regulating and trading carbon offset credits but current potential for mitigation is limited by a lack of standardized methods for calculating CO₂ equivalent emissions. The composition and emission factor data derived in this paper will be useful to industry, regulators, policy researchers, and entrepreneurs seeking statistically significant and openly available data necessary to manage and mitigate upstream flaring and venting activity and estimate greenhouse gas impacts.     

Seasonal performance of an outdoor constructed wetland for graywater treatment in a temperate climate

The seasonal treatment efficiency of a pilot-scale constructed wetland system located outdoors in a semi-arid, temperate climate was evaluated for graywater in a comprehensive, 1-year study. The system consisted of two wetland beds in series--a free water surface bed followed by a subsurface flow bed. Water quality monitoring evaluated organics, solids, nutrients, microbials, and surfactants. The results showed that the wetland substantially reduced graywater constituents during fall, spring, and summer, including biochemical oxygen demand (BOD) (92%), total nitrogen (85%), total phosphorus (78%), total suspended solids (TSS) (73%), linear alkylbenzene sulfonate (LAS) surfactants (94%), and E. coli (1.7 orders of magnitude). Except for TSS, lower removals of graywater constituents were noted in winter--BOD (78%), total nitrogen (64%), total phosphorus (65%), LAS (87%), and E. coli (1.0 order), indicating that, although wetland treatment slowed during the winter, the system remained active, even when the average water temperature was 5.2 +/- 4.5 degrees C.     

Study on the determination of PCDDs/Fs and HCB in exhaust gas

The subject of this study was to develop a method of simultaneous determination of PCDDs/PCDFs and HCB in exhaust gases from industrial installations. Sampling to determine PCDDs/PCDFs was conducted using the method described in PN-EN 1948-1: 2006, where the sorption material is polyurethane foam (PUF). In order to simultaneously collect PCDDs/PCDFs and HCB and to avoid sorbent bed breakthrough, it was necessary to apply an additional polyurethane sorption layer. Twenty-seven samples of exhaust gases from various cement plants and 40 samples of exhaust gases from hospital and industrial waste incineration plants collected in 2009/2010 in the entire territory of Poland were examined. The average content of PCDDs/Fs in samples from cement plants amounted to 0.076 ng I-TEQ N m(-3) (range of 0.002-0.62 ng I-TEQ N m(-3)), while the average content of HCB amounted to 10 ng N m(-3) (range of 0.98-60.5 ng N m(-3)). In the case of samples collected from waste incineration plants, the average concentration of PCDDs/Fs was 0.39 ng I-TEQN m(-3) (range of 0.002-5.68 ng I-TEQ N m(-3)). In the case of HCB, the average concentration was 238 ng N m(-3) (range of 3.21-2500 ng N m(-3)). Also, the interdependence of the concentration of PCDDs/PCDFs and HCB was determined in the analysed samples, with the ranges of low and high content of PCDDs/PCDFs being examined separately. In all cases, the determined values of the r correlation coefficient were within the range of 0.7-1.0, which indicates a good correlation between the concentrations of PCDDs/PCDFs and HCB.     

An analysis of flaring and venting activity in the Alberta upstream oil and gas industry

Alberta, Canada, is an important global producer of petroleum resources. In association with this production, large amounts of gas (1.14 billion m3 in 2008) are flared or vented. Although the amount of flaring and venting has been measurably reduced since 2002, data from 2005 reveal sharp increases in venting, which have important implications in terms of resource conservation and greenhouse gas emissions (which exceeded 8 million tonnes of carbon dioxide equivalent in 2008). With use of extensive monthly production data for 18,203 active batteries spanning the years 2002-2008 obtained in close cooperation with the Alberta Energy Resources Conservation Board, a detailed analysis has been completed to examine activity patterns of flaring and venting and reasons behind these trends in the Alberta upstream oil and gas industry. In any given year, approximately 6000 batteries reported flaring and/or venting, but the distribution of volumes flared and vented at individual sites was highly skewed, such that small numbers of sites handled large fractions of the total gas flaring and venting in the Province. Examination of month-to-month volume variability at individual sites, cast in terms of a nominal turndown ratio that would be required for a compressor to capture that gas and direct it into a pipeline, further revealed that volumes at a majority of sites were reasonably stable and there was no evidence that larger or more stable sites had been preferentially reduced, leaving potential barriers to future mitigation. Through linking of geospatial data with production data coupled with additional statistical analysis, the 31.2% increase in venting volumes since 2005 was revealed to be predominantly associated with increased production of heavier oils and bitumen in the Lloydminster region of the Province. Overall, the data suggest that quite significant reductions in flaring and venting could be realized by seeking mitigation solutions for only the largest batteries in the Province.     

Mean Annual Temperature and Total Annual Precipitation Trends at Canadian Biosphere Reserves

This article examines instrumental climate records from a varietyof stations associated with the following Biosphere Reserves across Canada: (i) Waterton Lakes, (ii) Riding Mountain, (iii) Niagara Escarpment, (iv) Long Point, and (v) Kejimkujik (Candidate Biosphere Reserve). Annual series are generated fromdaily temperature and precipitation values. In addition, homogeneous data are used from other stations and regional records to supplement the records from the local biosphere stations. Long term trends are identified over the period of the instrumental record. In general, data from the interval 1900 to 1998 show cooler temperatures in the 1920's, warmingfrom the early 1940's into the early 1950's, cooling into the1970's, and subsequent warming. At many stations, 1998 is the warmest in the instrumental record. Comparisons with the regional data sets show good agreements between the temperatureseries. The 20th century warming is approximately 1.0 °C in the Riding Mountain area and 0.6 °Cin the Long Point, Niagara Escarpment, and Waterton Lakes areas.There has been slight cooling in the Kejimkujik area over the past half century. Precipitation data show increasing trends inthe Kejimkujik, Long Point, Niagara Escarpment, and Waterton Lakes areas with no long term trend in the Riding Mountain area. This work is part of the Canadian Biosphere Reserves Association (CBRA) Climate Change Initiative (CCI), designed to present climate change information to Biosphere Reserve communities to allow local organizations to understand climate change and adapt to potential impacts.     

National contributions to global ecosystem values

Current conservation templates prioritize biogeographic regions with high intensity ecosystem values, such as exceptional species richness or threat. Intensity-based targets are an important consideration in global efforts, but they do not capture all available opportunities to conserve ecosystem values, including those that accrue in low intensity over large areas. We assess six globally-significant ecosystem values—intact wilderness, freshwater availability, productive marine environments, breeding habitat for migratory wildlife, soil carbon storage, and latitudinal potential for range shift in the face of climate change—to highlight opportunities for high-impact broadly-distributed contributions to global conservation. Nations can serve as a cohesive block of policy that can profoundly influence conservation outcomes. Contributions to global ecosystem values that exceed what is predicted by a nation's area alone, can give rise to countries with the capacity to act as ‘conservation superpowers’, such as Canada and Russia. For these conservation superpowers, a relatively small number of national policies can have environmental repercussions for the rest of the world.     

Movement and residual toxicity of carbofuran in acid mineral soil

In greenhouse miniplots with soil moisture moving upward from the subsoil, toxicants of carbofuran moved upward and became detectable at the soil surface in ca. 3, 7, and 28 days after 10% granules of the insecticide were banded 1, 3, and 10 cm, respectively, below the surface. The test soil had a pH of 5.2 and contained 2.9% organic matter. Toxic residues reaching the soil surface from a depth of 5–10 cm increased over a period of 8–12 months and gradually decreased thereafter. Fifteen to 20 ppm in the surface soil was highly toxic to flies contacting the soil surface. Amounts in excess of 40 ppm in the surface layer caused knockdown in 10–15 and estimated death in less than 30 s. The LD₅₀ for cabbage maggot eggs on the surface of treated soil was 8.2 ppm and for larvae 0.86 ppm. Chemical analysis records correlated well with those of bio-assay tests. In field microplots, the addition of water during rainstorms (giving a total of 50 mm) demonstrated that toxic residues of carbofuran could be leached downward to at least 45 cm. However, under the normal weather conditions of 1980 and under abnormally dry conditions most of the detectable residues remained near or above the point of application.     

Evidence of behavioral co-option from context-dependent variation in mandible use in trap-jaw ants (Odontomachus spp.)

Evolutionary co-option of existing structures for new functions is a powerful yet understudied mechanism for generating novelty. Trap-jaw ants of the predatory genus Odontomachus are capable of some of the fastest self-propelled appendage movements ever recorded; their devastating strikes are not only used to disable and capture prey, but produce enough force to launch the ants into the air. We tested four Odontomachus species in a variety of behavioral contexts to examine if their mandibles have been co-opted for an escape mechanism through ballistic propulsion. We found that nest proximity makes no difference in interactions with prey, but that prey size has a strong influence on the suite of behaviors employed by the ants. In trials involving a potential threat (another trap-jaw ant species), vertical jumps were significantly more common in ants acting as intruders than in residents (i.e. a dangerous context), while horizontal jumps occurred at the same rate in both contexts. Additionally, horizontal jump trajectories were heavily influenced by the angle at which the substrate was struck and appear to be under little control by the ant. We conclude that while horizontal jumps may be accidental side-effects of strikes against hard surfaces, vertical escape jumps are likely intentional defensive behaviors that have been co-opted from the original prey-gathering and food-processing functions of Odontomachus jaws.     

Predicting a ‘tree change’ in Australia's tropical savannas: Combining different types of models to understand complex ecosystem behaviour

In this study, key ecological modelling limitations of a process-based simulation model and a Bayesian network were reduced by combining the two approaches. We demonstrate the combined modelling approach with a case study investigating increases in woody vegetation density in northern Australia's tropical savannas. We found that by utilising the strengths of a simulation model and a Bayesian network we could both forecast future change in woody vegetation density and diagnose the reasons for current vegetation states. The local conditions of climate, soil characteristics and the starting population of trees were found to be more important in explaining the likelihood of change in woody vegetation density compared to management practices such as grazing pressure and fire regimes. We conclude that combining the strengths of a process and BN model allowed us to produce a simple model that utilised the ability of the process model to simulate ecosystem processes in detail and over long time periods, and the ability of the BN to capture uncertainty in ecosystem response and to conduct scenario, sensitivity and diagnostic analysis. The overall result was a model that has the potential to provide land managers with a better understanding of the behaviour of a complex ecosystem than simply utilising either modelling approach in isolation.