Assessment of phenol infiltration resilience in soil media by HYDRUS-1D transport model for a waste discharge site

The movement of contaminants through soil imparts a variety of geo-environmental problem inclusive of lithospheric pollution. Near-surface aquifers are often vulnerable to contamination from surface source if overlying soil possesses poor resilience or contaminant attenuation capacity. The prediction of contaminant transport through soil is urged to protect groundwater from sources of pollutants. Using field simulation through column experiments and mathematical modeling like HYDRUS-1D, assessment of soil resilience and movement of contaminants through the subsurface to reach aquifers can be predicted. An outfall site of effluents of a coke oven plant comprising of alarming concentration of phenol (4–12.2 mg/L) have been considered for studying groundwater condition and quality, in situ soil characterization, and effluent characterization. Hydrogeological feature suggests the presence of near-surface aquifers at the effluent discharge site. Analysis of groundwater of nearby locality reveals the phenol concentration (0.11–0.75 mg/L) exceeded the prescribed limit of WHO specification (0.002 mg/L). The in situ soil, used in column experiment, possess higher saturated hydraulic conductivity (K _S ?=?5.25?×?10^?4 cm/s). The soil containing 47 % silt, 11 % clay, and 1.54 % organic carbon content was found to be a poor absorber of phenol (24 mg/kg). The linear phenol adsorption isotherm model showed the best fit (R ²?=?0.977, RMSE?=?1.057) to the test results. Column experiments revealed that the phenol removal percent and the length of the mass transfer zone increased with increasing bed heights. The overall phenol adsorption efficiency was found to be 42–49 %. Breakthrough curves (BTCs) predicted by HYDRUS-1D model appears to be close fitting with the BTCs derived from the column experiments. The phenol BTC predicted by the HYDRUS-1D model for 1.2 m depth subsurface soil, i.e., up to the depth of groundwater in the study area, showed that the exhaustion point was reached within 12 days of elapsed time. This clearly demonstrated poor attenuation capacity of the soil to retard migration of phenol to the groundwater from the surface outfall site. Suitable liner, based on these data, may be designed to inhibit subsurface transport of phenol and thereby to protect precious groundwater from contamination.     

Dissipation behavior of propargite--an acaricide residues in soil, apple (Malus pumila) and tea (Camellia sinensis)

Propargite, recently introduced in India, is an effective acaricide on a large number of crops most of which are consumed by human beings directly or after processing. Therefore, it has become important to check the dissipation behavior of propargite in edible raw commodities, processed products and in the environment. In the present study, dissipation of residue of this acaricide in soil, apple fruit and tea (green tea leaves, manufactured tea, infusion and spent leaves) was studied. Analysis was carried out using high performance-liquid chromatography with UV detection system. The dissipation rate was found to vary with the nature of studied crop/sample. In soil, half-life ranged from 43 to 45 days, while in plant matrices (tea and apple) it ranged 1.66-2.61 days. The percent transfer of propargite residue from manufactured tea to infusion was 23.60-40.00; however, 35.71-53.20% of the residues remained stuck to the spent leaves.     

Heavy Metal Accumulation in Lichens from the Hetauda Industrial Area Narayani Zone Makwanpur District, Nepal

Lichen samples collected in and around Hetauda Industrial area,(HIA) Narayani zone, Makwanpur district, Nepal, were analyzedfor Cr, Ni, Pb, Zn, Ca, Mn, Fe, Si, and Al. The samples fromthe location inside the industrial area have higher levels ofmetal than the outside areas. Pyxine meissnerina growinginside the industrial area accumulated higher levels of all themetals analyzed.     

Large-Eddy Simulations of the Atmospheric Boundary Layer Using a New Subgrid-Scale Model – II. Weakly and moderately stable cases

A series of simulations under weakly to moderately stable boundary layers (SBLs) have been performed using the proposed subgrid-scale (SGS) model implemented into the Terminal Area Simulation System (TASS). The proposed SGS model incorporates some aspects of the two-part eddy viscosity SGS model of Sullivan et al. (1994) and further refinements which include the dependence of SGS mixing length on stratification, two-part separation of the SGS eddy diffusivity of heat, and more realistic empirical forms of Monin–Obukhov similarity functions. The potential temperature profiles from simulations clearly show a three-layer structure: a stable surface layer of strong gradients, a middle layer of small gradients, and an inversion layer on the top. The wind speed profiles show the formation of low level jet (LLJ). However, the sub-layer structures under moderately SBLs differ from those under weakly SBLs. Both the momentum and heat fluxes decrease almost linearly in the lower part of the SBL. The near surface values of the normalized turbulent kinetic energy (TKE/u _* ²) in all simulations are about 4 which is much less than the typical value of 5.5 under the neutral condition. The decay of turbulence first occurs in the area with large values of Richardson number (R _i<0.2). Generally, instantaneous values of the TKE and R _i at the various grid points are negatively correlated, but there is not a unique relationship between the two parameters.     

Accumulation of Polyhydroxyalkanoates by Rhizobacteria Underneath Nickel-Hyperaccumulators from Serpentine Ecosystem

Nickel-resistant bacteria isolated from underneath Ni-hyperaccumulators growing on serpentine soils were screened for production of polyhydroxyalkanoates. These rhizobacteria accumulated poly-3-hydroxybutyric acid [P(3HB)] accounting 3.9–67.7% of cell dry weight during growth in gluconate and/or glucose. Cupriavidus pauculus KPS 201 utilized only gluconate and accumulated about 67.7% P(3HB) while, Bacillus firmus AND 408 utilized both carbon sources for polymer synthesis. The isolates being resistant to Ni also accumulated substantial amount of P(3HB) when grown in presence of the heavy metal and this was revealed by transmission electron microscopic studies. Although B. firmus AND 408 produced only P(3HB) at higher concentrations of gluconate, C. pauculus KPS 201 synthesized copolymer of 3-hydroxybutyric acid (3HB) and 3-hydroxyvaleric acid (3HV) [P(3HB-co-3HV)]. In presence of 0.8% gluconate and 4 mM Ni, KPS 201 cells produced PHA amounting 81% CDW, which contained 76 and 24 mol% 3HB and 3HV monomers, respectively.     

Complete degradation of di-n-octyl phthalate by Gordonia sp. strain Dop5

The present study describes the assimilation of di-n-octyl phthalate by an aerobic bacterium, isolated from municipal waste-contaminated soil sample utilizing di-n-octyl phthalate as the sole source of carbon and energy. The isolate was identified as Gordonia sp. based on the morphological, nutritional and biochemical characteristics as well as 16S rRNA gene sequence analysis. A combination of chromatographic and spectrometric analyses revealed a complete di-n-octyl assimilation pathway. In the degradation process, mono-n-octyl phthalate, phthalic acid, protocatechuic acid and 1-octanol were identified as the degradation products of di-n-octyl phthalate. Furthermore, phthalic acid was metabolized via protocatechuic acid involving protocatechuate 3,4-dioxygenase while 1-octanol was metabolized by NAD⁺-dependent dehydrogenases to 1-octanoic acid, which was subsequently degraded via β-oxidation, ultimately, leading to tricarboxylic acid cycle intermediates. Apart from phthalic acid and 1-octanol metabolizing pathway enzymes, two esterases, di-n-octyl phthalate hydrolase and mono-n-octyl phthalate hydrolase involved in di-n-octyl phthalate degradation were found to be inducible in nature. This is the first report on the metabolic pathway involved in the complete degradation of di-n-octyl phthalate by a single bacterial isolate, which is also capable of efficiently degrading other phthalate esters of environmental concern having either shorter or longer alkyl chains.     

Size-assortative mating and non-reciprocal copulation in a hermaphroditic intertidal limpet: test of the mate availability hypothesis

Mating behaviour and mating patterns are affected to a large extent by body size in both hermaphrodites and gonochorists. Detailed research on mating patterns, mate choice, pre- and post-copulatory sexual selection in marine pulmonates is wanting, thus warranting more attention as a study system in the future. The simultaneous hermaphroditic limpet Siphonaria capensis (Pulmonata: Basommatophora) shows size-dependent fecundity, and acts as a suitable organism to test the effects of body size on mating patterns, mating success, gender expression and reciprocity in hermaphroditic marine gastropods. We mainly used bootstrap resampling techniques to estimate the effects of different factors on mating patterns. In the populations studied, a strong size-assortative mating pattern was observed, where small-scale spatial distribution of potential mating partners (the mate availability hypothesis) could explain 65% of this pattern, while mate choice and mating constraints explaining the rest. No significant difference in mating success between limpets with different body size was found, even though in one population, the sperm recipients were larger than the non-copulating limpets. Interestingly, we found that intromission was non-reciprocal during copulations. This may mean that this species does not conform to the common rule of reciprocity predicted for hermaphrodites, unless there is sex-role alternation between individuals in a mating pair. The mating partners consisted of similar sized, acting males and females, thus without any indication of the body size determining the gender expression. The matings took place in early mornings only at spring tides and the animals were observed laying egg masses only during neap tides. Since siphonariid limpets possess both a spermatheca and a seminal vesicle, which may have either a sperm storing and/or digestive function, post-copulatory sexual selection (e.g., sperm competition) cannot be dismissed.     

Analysis of uranium and its correlation with some physico-chemical properties of drinking water samples from Amritsar, Punjab

Fission track technique has been used for uranium estimation in drinking water samples collected from some areas of Amritsar District, Punjab, India. The uranium concentration in water samples is found to vary from 3.19 to 45.59 microg l(-1). Some of the physico-chemical properties such as pH, conductance and hardness and the content of calcium, magnesium, total dissolved solids (TDS), sodium, potassium, chloride, nitrate and heavy metals viz. zinc, cadmium, lead and copper have been determined in water samples. An attempt has been made to correlate uranium concentration with these water quality parameters. A positive correlation of conductance, nitrate, chloride, sodium, potassium, magnesium, TDS, calcium and hardness with uranium concentration has been observed. However, no correlation has been observed between the concentration of uranium and the heavy metals analysed.     

An experimental study to evaluate musculoskeletal disorders and postural stress of female craftworkers adopting different sitting postures

This study aimed to evaluate musculoskeletal disorders (MSDs) and postural stress among female craftworkers. The study was carried out on 75 adult female craftworkers in different districts of West Bengal. The prevalence of MSDs, body part discomfort (BPD) rating and body joint angles of the workers were evaluated with standard methods. Electromyography (EMG) of the shoulder and back muscles was recorded with the BIOPAC system. The prevalence of MSDs, BPD rating and deviation of joint angle were comparatively lower in the case of sitting on the floor with folded legs than squatting and sitting on the floor with stretched legs postures. The EMG and rms values of the shoulder and back muscles were comparatively lower in this posture. Therefore, it was concluded that sitting on the floor with folded legs was less hazardous and it imposed less postural stress in comparison to other sitting postures.