“An eye for an eye?”—on the generality of the intimidating quality of eyespots in a butterfly and a hawkmoth

Large eyespots on the wings of butterflies and moths have been ascribed generally intimidating qualities by creating a frightening image of a bird or mammal much larger than the insect bearing the eyespots. However, evidence for this anti-predator adaptation has been largely anecdotal and only recently were peacock butterflies, Inachis io, shown to effectively thwart attacks from blue tits, Parus caeruleus. Here, we test whether large eyespots on lepidopterans are generally effective in preventing attacks from small passerines and whether the size of insect or bird can influence the outcome of interactions. We staged experiments between the larger eyed hawkmoths, Smerinthus ocellatus, and the smaller peacock butterflies, I. io, and the larger great tits, Parus major, and the smaller blue tits, P. caeruleus. Survival differed substantially between the insect species with 21 of 24 peacock butterflies, but only 6 of 27 eyed hawkmoths, surviving attacks from the birds. Thus, surprisingly, the smaller prey survived to a higher extent, suggesting that factors other than insect size may be important. However, great tits were less easily intimidated by the insects’ eyespots and deimatic behaviour and consumed 16 of 26, but the blue tits only 8 of 25, of the butterflies and hawkmoths. Our results demonstrate that eyespots per se do not guarantee survival and that these two insects bearing equally large eyespots are not equally well protected against predation.     

Kinship, familiarity and social status modulate social learning about “micropredators” (biting flies) in deer mice

Animals can learn to recognize and respond to dangerous, threatening factors through either individual or social learning, whereby an individual learns and acquires the defensive behaviors and avoidance responses of another. Here we show that kinship, familiarity, and relative dominance of the interacting individuals affect social learning of defensive responses to micropredators in deer mice, Peromyscus maniculatus. Brief exposure of individual male deer mice to biting flies (stable fly, Stomoxys calcitrans) induced a decrease in pain sensitivity, or analgesia, and active self-burying avoidance responses. The defensive analgesic responses and their fear/anxiety/stress associated correlates facilitate the display of behavioral avoidance responses. Preparatory analgesia and avoidance responses were evident 1–3 days later when the mice were exposed to biting flies that were altered to be incapable of biting but were not displayed to similar-sized non-biting house flies. These anticipatory avoidance and analgesic responses to biting flies were also acquired through social learning—without direct individual aversive experience with biting flies. Fly-naive mice (observers) that witnessed other mice (demonstrators) being attacked by biting flies but themselves were not bitten did not display any avoidance responses. However, when exposed 1–3 days later to altered flies with biting mouth parts removed, the observers displayed socially acquired analgesic and self-burying avoidance responses. Observers whose demonstrators were either kin (siblings) and, or members of a familiar pair (kin or non-kin) displayed enhanced social learning of defensive responses. Also, within the familiar pairs, social status affected learning with subordinate observers displaying better social learning than dominant observers. These findings indicate that kinship, familiarity and social status modulate social learning of defensive responses to, and the recognition of, dangerous and threatening stimuli, likely including that of predators.Communicated by G. Wilkinson     

Dioxins and furans in emissions from medical waste incinerators

Dioxins and furans were detected in emissions from eight medical waste incinerators tested in California. Total uncontrolled emissions ranged from 363 to 11, 811 nanograms per dry standard cubic meter. The most effective of three wet scrubbers achieved an emissions control efficiency of 95 percent for total PCDD and PCDF. A baghouse was less than 30 percent efficient in removing PCDD and PCDF from the incinerator emissions.     

Distribution of organochlorine pesticides, polychlorinated biphenyls and alpha-HCH enantiomers in pork tissues

The distribution of HCH isomers, DDT analogues and selected PCB congeners in pork organs collected from the same individuals raised in Romanian farms was investigated. Organochlorine pesticides (HCHs and DDTs) were the principal contaminants in all samples, while PCB concentrations were low, in accordance with previously reported concentrations from Romanian animal farms. The most part of the pollutant load in the body is retained in the adipose tissue, with HCHs ranging between 16 and 27.7 ng/g lipid and with higher concentrations of DDTs ranging between 65.9 and 334.5 ng/g lipid. The highest PCB levels (up to 32 ng/g lipid) were measured in lung and liver. The lipid-normalized concentrations in the brain were lower than in all other tissues due to the presence of the blood-brain barrier or due to a lower proportion of the neutral lipids such as triglycerides. The highest concentrations of DDTs were measured in muscle and fat, with p,p'-DDE being the principal contributor and with a variable contribution of p,p'-DDD and p,p'-DDT. In liver, p,p'-DDD has a higher contribution to the sum DDTs, while in all analyzed livers, the concentration of p,p'-DDT was very low. beta-HCH was the most persistent HCH isomer in all tissues, accounting for 40-97% of sum HCHs. For all animals, the highest concentrations of beta-HCH and HCHs were found in liver, while the lowest HCH concentrations were measured in brain and spinal marrow. Additionally, the distribution of alpha-HCH enantiomers in the tissues was discussed. In all samples (except 2 brain samples), (+) alpha-HCH was depleted and (-) alpha-HCH was enantioenriched. Enantiomeric ratios in brain were the highest measured values between all organs. For all studied animals, ERs increased in the order fat < muscle < liver < brain.     

Persistent organochlorine pollutants in human serum of 50-65 years old women in the Flanders Environmental and Health Study (FLEHS). Part 2: Correlations among PCBs,PCDD/PCDFs and the use of predictive markers

In 1999, the FLEHS was set by the Flemish Ministry of Health, Belgium to assess pollutant concentrations and related health effect biomarkers in humans living in Flanders. Concentrations of selected organochlorine pesticides, polychlorinated biphenyls (PCB) and polychlorinated dibenzo-p-dioxins (PCDD) and furans (PCDF) were measured by gas chromatography-mass spectrometry and Chemical-Activated LUciferase gene eXpression (CALUX) bioassay in 47 serum pools of 200 women between 50 and 65 years living in two areas of Flanders. Correlation between TEQ values of different groups of compounds were computed in these pool results and it was found that total toxic equivalencies (TEQs) correlated well with the values of the groups of contributing compounds: mono-ortho PCBs (r = 0.77), non-ortho PCBs (r = 0.65) and PCDD/Fs (r = 0.88). The total TEQ was lower correlated to the CALUX-TEQ (r = 0.57). When calculating associations between those classes of compounds in the two studied regions separately, they were all higher correlated in the urban area compared to the more rural region. High correlation coefficients (r > 0.80) were also calculated between individual compounds and groups of compounds. It was suggested that in this studied background-exposed population, some compounds could be good predictors for a group: e.g. PCB 153 for indicator and total PCBs, PCB 118 for total PCB TEQ, PCB 156 for mono-ortho PCB-TEQs and total TEQ, 2,3,4,7,8-P5CDF for PCDD/F TEQs and total TEQs. This means that in pooled serum samples correlations between persistent organochlorine compounds are as strong as for individual POP measurements observed in earlier studies.     

Major challenges of integrating agriculture into climate change mitigation policy frameworks

Taking the European Union (EU) as a case study, we simulate the application of non-uniform national mitigation targets to achieve a sectoral reduction in agricultural non-carbon dioxide (CO₂) greenhouse gas (GHG) emissions. Scenario results show substantial impacts on EU agricultural production, in particular, the livestock sector. Significant increases in imports and decreases in exports result in rather moderate domestic consumption impacts but induce production increases in non-EU countries that are associated with considerable emission leakage effects. The results underline four major challenges for the general integration of agriculture into national and global climate change mitigation policy frameworks and strategies, as they strengthen requests for (1) a targeted but flexible implementation of mitigation obligations at national and global level and (2) the need for a wider consideration of technological mitigation options. The results also indicate that a globally effective reduction in agricultural emissions requires (3) multilateral commitments for agriculture to limit emission leakage and may have to (4) consider options that tackle the reduction in GHG emissions from the consumption side.     

Resilience engineering: theory and practice in interdependent infrastructure systems

The economy and well-being of modern societies relies on complex and interdependent infrastructure systems to enable delivery of utilities and movement of goods, people and services. This complexity has resulted in an increased potential for cascading failures, whereby small scale initial failures in one system can result in events of catastrophic proportions across the wider network. Resilience and the emerging concept of resilience engineering within infrastructure are among the main concerns of those managing such complex systems. However, the disparate nature of resilience engineering development in various academic and industrial regimes has resulted in a diversity of definitions and characterisations. These are discussed in this paper, as are the commonalities between sectors and between different engineering disciplines. The paper also highlights the various methodologies used as part of resilience engineering implementation and monitoring, current practices including existing approaches and metrics, and an insight into the opportunities and potential barriers associated with these methodologies and practices. This research was undertaken for the Resilience Shift initiative to shift the approach to resilience in practice for critical infrastructure sectors. The programme aims to help practitioners involved in critical infrastructure to make decisions differently, contributing to a safer and better world.     

Biodegradation and bioconversion of cellulose wastes using bacterial and fungal cells immobilized in radiopolymerized hydrogels

Annually, great amounts of cellulose wastes, which could be measured in many billions of tons, are produced worldwide as residues from agricultural activities and industrial food processing. Consequently, the use of microorganisms in order to remove, reduce or ameliorate these potential polluting materials is a real environmental challenge, which could be solved by a focused research concerning efficient methods applied in biological degradation processes. In this respect, the scope of this chapter is to present the state of the art concerning the biodegradation of redundant cellulose wastes from agriculture and food processing by continuous enzymatic activities of immobilized bacterial and fungal cells as improved biotechnological tools and, also, to report on our recent research concerning cellulose wastes biocomposting to produce natural organic fertilizers and, respectively, cellulose bioconversion into useful products, such as: ‘single-cell protein’ (SCP) or ‘protein-rich feed’ (PRF). In addition, there are shown some new methods to immobilize microorganisms on polymeric hydrogels such as: poly-acrylamide (PAA), collagen-poly-acrylamide (CPAA), elastin-poly-acrylamide (EPAA), gelatin-poly-acrylamide (GPAA), and poly-hydroxy-ethyl-methacrylate (PHEMA), which were achieved by gamma polymerization techniques. Unlike many other biodegradation processes, these methods were performed to preserve the whole viability of fungal and bacterial cells during long term bioprocesses and their efficiency of metabolic activities. The immobilization methods of viable microorganisms were achieved by cellular adherence mechanisms inside hydrogels used as immobilization matrices which control cellular growth by: reticulation size, porosity degree, hydration rate in different colloidal solutions, organic and inorganic compounds, etc. The preparative procedures applied to immobilize bacterial and fungal viable cells in or on radiopolymerized hydrogels and, also, their use in cellulose wastes biodegradation are discussed in detail. In all such performed experiments were used pure cell cultures of the following cellulolytic microorganisms: Bacillus subtilis and Bacillus licheniformis from bacteria, and Pleurotus ostreatus, Pleurotus florida, and Trichoderma viride from fungi. These species of microorganisms were isolated from natural habitats, then purified by microbiological methods, and finally, tested for their cellulolytic potential. The cellulose biodegradation, induced especially by fungal cultures, used as immobilized cells in continuous systems, was investigated by enzymatic assays and the bioconversion into protein-rich biomass was determined by mycelial protein content, during such long time processes. The specific changes in cellular development of immobilized bacterial and fungal cells in PAA hydrogels emphasize the importance of physical structure and chemical properties of such polymeric matrices used for efficient preservation of their metabolic activity, especially to perform in situ environmental applications involving cellulose biodegradation by using immobilized microorganisms as long-term viable biocatalysts.