Sources and characteristics of carbonaceous aerosols at Agra “World heritage site” and Delhi “capital city of India”

Agra, one of the oldest cities “World Heritage site”, and Delhi, the capital city of India are both located in the border of Indo-Gangetic Plains (IGP) and heavily loaded with atmospheric aerosols due to tourist place, anthropogenic activities, and its topography, respectively. Therefore, there is need for monitoring of atmospheric aerosols to perceive the scenario and effects of particles over northern part of India. The present study was carried out at Agra (AGR) as well as Delhi (DEL) during winter period from November 2011 to February 2012 of fine particulate (PM_2.5: d?<?2.5 μm) as well as associated carbonaceous aerosols. PM_2.5 was collected at both places using medium volume air sampler (offline measurement) and analyzed for organic carbon (OC) and elemental carbon (EC). Also, simultaneously, black carbon (BC) was measured (online) at DEL. The average mass concentration of PM_2.5 was 165.42?±?119.46 μg m^?3 at AGR while at DEL it was 211.67?±?41.94 μg m^?3 which is ~27 % higher at DEL than AGR whereas the BC mass concentration was 10.60 μg m^?3. The PM_2.5 was substantially higher than the annual standard stipulated by central pollution control board and United States Environmental Protection Agency standards. The average concentrations of OC and EC were 69.96?±?34.42 and 9.53?±?7.27 μm m^?3, respectively. Total carbon (TC) was 79.01?±?38.98 μg m^?3 at AGR, while it was 50.11?±?11.93 (OC), 10.67?±?3.56 μg m^?3 (EC), and 60.78?±?14.56 μg m^?3 (TC) at DEL. The OC/EC ratio was 13.75 at (AGR) and 5.45 at (DEL). The higher OC/EC ratio at Agra indicates that the formation of secondary organic aerosol which emitted from variable primary sources. Significant correlation between PM_2.5 and its carbonaceous species were observed indicating similarity in sources at both sites. The average concentrations of secondary organic carbon (SOC) and primary organic carbon (POC) at AGR were 48.16 and 26.52 μg m^?3 while at DEL it was 38.78 and 27.55 μg m^?3, respectively. In the case of POC, similar concentrations were observed at both places but in the case of SOC higher over AGR by 24 in comparison to DEL, it is due to the high concentration of OC over AGR. Secondary organic aerosol (SOA) was 42 % higher at AGR than DEL which confirms the formation of secondary aerosol at AGR due to rural environment with higher concentrations of coarse mode particles. The SOA contribution in PM_2.5 was also estimated and was ~32 and 12 % at AGR and DEL respectively. Being high loading of fine particles along with carbonaceous aerosol, it is suggested to take necessary and immediate action in mitigation of the emission of carbonaceous aerosol in the northern part of India.     

Vermistabilization and nutrient enhancement of anaerobic digestate through earthworm species Perionyx excavatus and Perionyx sansibaricus

The aim of the study was to examine safe reuse and recycling of organic waste digestate obtained from a biogas plant (5 % total solid) with enhanced nutrient value through vermitechnology. Two indigenous epigeic earthworm species Perionyx excavates and Perionyx sansibaricus were tried individually for this purpose. The results clearly show a significant increase in pH values from 6.5–7.4, electrical conductivity (21.3–21.7 %), total N (84.5–94.6 %), total P (35.9–47.1 %), total K (49.8–52.6 %), Ca (41.9–41.9 %) and a significant decrease in total organic C (17.1–22.4 %), C/N ratio (7.2–6.9), C/P ratio (20.3–20.6), COD (51.9–55.7 %), BOD (85.5–91.2 %). Similarly, indicator organisms (fecal coliforms and fecal streptococci) showed decrement at the end of the composting period (60 days). Fecal Coliforms reduce to nil, while in fecal streptococci a 6 log reduction was observed. Oxygen uptake rate dropped to 67.4–70 % for vermireactors. Overall, the aforementioned findings highlighted that the indigenous earthworm species could enhance the nutrient value of the anaerobic digestate, which could be utilized as an efficient soil conditioner.     

Biodegradable Poly(butylene succinate) and Poly(butylene adipate-co-terephthalate) Blends: Reactive Extrusion and Performance Evaluation

Two biodegradable polyesters, poly(butylene adipate-co-terephthalate) (PBAT) and poly(butylene succinate) (PBS) were melt-compounded in a twin screw extruder to fabricate a novel PBS/PBAT blend. The compatibility of the blend was attributed to the transesterification reaction that was confirmed by Fourier transform infrared spectroscopy. The Gibbs free energy equation was applied to explain the miscibility of the resulting blend. Dynamic mechanical analysis of the blends exhibits an intermediate tanδ peak compared to the individual components which suggests that the blend achieved compatibility. One of the key findings is that the tensile strength of the optimized blend is higher than each of the blended partner. Rheological properties revealed a strong shear-thinning tendency of the blend by the addition of PBAT into PBS. The phase morphology of the blends was observed through scanning electron microscopy, which revealed that phase separation occurred in the blends. The spherulite growth in the blends was highly influenced by the crystallization temperature and composition. In addition, the presence of a dispersed amorphous phase was found to be a hindrance to the spherulite growth, which was confirmed by polarizing optical microscopy. Furthermore, the increased crystallization ability of PBAT in the blend systems gives the blend a balanced thermal resistance property.     

Chemically coupled microwave and ultrasonic pre-hydrolysis of pulp and paper mill waste-activated sludge: effect on sludge solubilisation and anaerobic digestion

The effects of alkali-enhanced microwave (MW; 50–175 °C) and ultrasonic (US) (0.75 W/mL, 15–60 min) pretreatments, on solubilisation and subsequent anaerobic digestion efficiency of pulp and paper mill waste-activated sludge, were investigated. Improvements in total chemical oxygen demand and volatile suspended solids (VSS) solubilisation were limited to 33 and 39 % in MW pretreatment only (175 °C). It reached 78 and 66 % in combined MW–alkali pretreatment (pH 12?+?175 °C), respectively. Similarly, chemical oxygen demand and VSS solubilisation were 58 and 37 % in US pretreatment alone (60 min) and it improved by 66 and 49 % after US–alkali pretreatment (pH 12?+?60 min), respectively. The biogas yield for US 60 min–alkali (pH 12)-pretreated sludge was significantly improved by 47 and 20 % over the control and US 60 reactors, respectively. The biogas generation for MW (150 °C)–alkali (pH 12)-pretreated sludge was only 6.3 % higher than control; however, it was 8.3 % lower than the MW (150 °C) reactor, which was due to the inhibition of anaerobic activity under harsh thermal–alkali treatment condition.     

Effects of thiobencarb in combinations with molinate and chlorpyrifos on selected soil microbial processes

The impact of pesticides, namely thiobencarb (TBC), molinate (MOL) and chlorpyrifos (CPF), on soil microbial processes was studied in two Australian soils. Substrate induced respiration (SIR), substrate induced nitrification (SIN) and phosphatases and chitinase enzymatic activities were assessed during a 30-day microcosm study. The pesticides were applied to soils at recommended rates either alone, or as binary mixtures with TBC. Soil samples were sampled at 5, 15 and 30 days after pesticide treatments. Substrate induced respiration was only transiently affected by pesticides in both soils. In contrast, the process of indigenous nitrification was affected by the presence of pesticides in both soils, especially when the pesticides were applied as binary mixtures. Substrate induced nitrification increased with pesticides in the Griffith soil (except with MOL+TBC after 5 days) whereas SIN values were non-significantly different to the control on the Coleambally soil. The binary mixtures of pesticides with TBC resulted in a decrease in SIN in both soils, but the effects disappeared within 30 days. The enzymatic activities were not consistently affected by pesticides, and varied with the soil and pesticides studied. This study showed that, when applied at recommended application rates, TBC, MOL, and CPF (individually or as binary mixtures), had little or only transitory effects on the functional endpoints studied. However, further investigations are needed to assess the effect on microbial densities and community structure despite the low disturbance to the functions noted in this work.     

Development of controlled release formulations of imidacloprid employing novel nano-ranged amphiphilic polymers

Amphiphilic copolymers, synthesized from poly (ethylene glycols) and various aliphatic diacids, which self assemble into nano-micellar aggregates in aqueous media, were used to develop controlled release (CR) formulations of imidacloprid [1-(6 chloro-3-pyridinyl methyl)-N- nitro imidazolidin-2- ylideneamine] using encapsulation technique. High solubilisation power and low critical micelle concentration (CMC) of these amphiphilic polymers may increase the efficacy of formulations. Formulations were characterised by Infrared (IR) spectroscopy, Dynamic Light Scattering (DLS) and Transmission Electron Microscope (TEM). Encapsulation efficiency, loading capacity and stability after accelerated storage test of the developed formulations were checked. The kinetics of imidacloprid release in water from the different formulations was studied. Release from the commercial formulation was faster than the CR formulations. The diffusion exponent (n value) of imidacloprid, in water ranged from 0.22 to 0.37 in the tested formulations. While the time taken for release of 50 % of imidacloprid ranged from 2.32 to 9.31 days for the CR formulations. The developed CR formulations can be used for efficient pest management in different crops.     

Reduction of bioavailability and leachability of heavy metals during vermicomposting of water hyacinth

Vermicomposting of water hyacinth is a good alternative for the treatment of water hyacinth (Eichhornia crassipes) and subsequentially, beneficial for agriculture purposes. The bioavailability and leachability of heavy metals (Zn, Cu, Mn, Fe, Ni, Pb, Cd, and Cr) were evaluated during vermicomposting of E. crassipes employing Eisenia fetida earthworm. Five different proportions (trials 1, 2, 3, 4, and 5) of cattle manure, water hyacinth, and sawdust were prepared for the vermicomposting process. Results show that very poor biomass growth of earthworms was observed in the highest proportion of water hyacinth (trial 1). The water soluble, diethylenetriaminepentaacetic acid (DTPA) extractable, and leachable heavy metals concentration (percentage of total heavy metals) were reduced significantly in all trials except trial 1. The total concentration of some metals was low but its water soluble and DTPA extractable fractions were similar or more than other metals which were present in higher concentration. This study revealed that the toxicity of metals depends on bioavailable fraction rather than total metal concentration. Bioavailable fraction of metals may be toxic for plants and soil microorganisms. The vermicomposting of water hyacinth by E. fetida was very effective for reduction of bioavailability and leachability of selected heavy metals. Leachability test confirmed that prepared vermicompost is not hazardous for soil, plants, and human health. The feasibility of earthworms to mitigate the metal toxicity and to enhance the nutrient profile in water hyacinth vermicompost might be useful in sustainable land renovation practices at low-input basis.     

Seasonal variations in cholinesterase activity, nerve conduction velocity and lung function among sprayers exposed to mixture of pesticides

Pesticide spraying operation is associated with the increased risk of adverse health effects among sprayers who do not follow safe farm work practices. A study was conducted among pesticide sprayers in North India to evaluate the clinical and subclinical variations in their vital health parameters before and after the pesticide spraying season. Blood cholinesterase levels, pulmonary function test, nerve conduction velocity and self-reported symptoms were studied among 18 eligible and consenting male sprayers. Mean acetylcholinesterase activity was reduced by 55 % in the post-exposure assessment (P?<?0.001) as compared to pre-exposure levels. Mean forced expiratory volume in 1 s was 20 % lower in the post-exposure assessment as compared to the pre-exposure level (P?<?0.05). No significant change was observed in the motor and sensory nerve conduction velocity in the median nerve of sprayers before and after the spraying activity. Also, no significant variation was observed with respect to self-reported symptoms except weakness in arms and legs (P?<?0.05). The significant decline in lung function and acetylcholinesterase level after pesticide exposure reflects the strongly negative effect of exposure to pesticides during spraying activity. More longitudinal studies among pesticide sprayers must be undertaken to further substantiate the cause–effect relationship between pesticide exposure and its subclinical effects. There is a strong necessity to minimise the exposure through the use of personal protective equipment in pesticide sprayers.     

Microwave synthesis and antifungal evaluations of some chalcones and their derived diaryl-cyclohexenones

Microwave irradiation (MWI) of acetophenones and substituted benzaldehydes in water resulted in a “green-chemistry” procedure for the preparation of chalcones (1-14), through base catalyzed Claisen-Schmidt condensation reaction, in good yields. Further 3,5-diaryl-6-carbethoxy-2-cyclohexen-1-ones (1a-14a) were prepared through base catalyzed cyclocondensation of above chalcones with ethylacetoacetate using MWI as the energy source and silica as support. Out of fourteen cyclohexenones, ten (1a, 4a, 5a, 6a, 7a, 9a, 10a, 11a, 12a and 13a) are reported for the first time in literature. The synthesized compounds were characterized using various spectroscopic techniques, viz. (¹H NMR and IR) and screened for their antifungal activity in vitro against Sclerotium rolfsii and Rhizoctonia solani by poisoned food technique. The compounds tested were found to be active against R. solani whereas against S. rolfsii, moderate activity was observed, as evident from LC₅₀ values. The most potent compounds against R. solani were 1-(4-Fluoro-phenyl)-3-phenyl-propenone (13) and 1,3-Diphenyl-propenone (14) having LC₅₀ values of 2.36 and 2.49 mgL^{? 1} respectively (LC₅₀ of Hexaconazole = 1.12 mgL^{? 1}) and against S. rolfsii 3-(4-Fluoro-phenyl)-5-(3-nitro-phenyl)-6-carbethoxy-2-cyclohexen-1-one (12a) was most active having LC₅₀ value of 285 mgL^{? 1}compared to Hexaconazole (LC₅₀ = 1.27 mgL^{? 1}).     

Study of microbes having potentiality for biodegradation of plastics

Plastic is a broad name given to the different types of organic polymers having high molecular weight and is commonly derived from different petrochemicals. Plastics are generally not biodegradable or few are degradable but in a very slow rate. Day by day, the global demand of these polymers is sharply increasing; however, considering their abundance and potentiality in causing different environmental hazards, there is a great concern in the possible methods of degradation of plastics. Recently, there have been some debates at the world stage about the potential degradation procedures of these synthetic polymers and microbial degradation has emerged as one of the potential alternative ways of degradation of plastics. Alternatively, some scientists have also reported many adverse effects of these polymers in human health, and thus, there is an immediate need of a potential screening of some potential microbes to degrade these synthetic polymers. In this review, we have taken an attempt to accumulate all information regarding the chemical nature along with some potential microbes and their enzymatic nature of biodegradation of plastics along with some key factors that affect their biodegradability.