A Sampling Protocol for Composting,Recycling, and Re-use of Municipal Solid Waste

Abstract

This article reports on development of a protocol for characterizing municipal solid waste (MSW). This protocol is similar to that recommended by the American Society for Testing and Materials but includes a distinction between pure and mixed loads of MSW. Thirteen component categories were used with a focus on material feed stock for composting, recycling, and reuse. The required number of samples was determined to achieve a 80%, 90%, and 95% statistical accuracy for characterizing MSW categories at 1% and 2% sampling error. This study found that a maximum of 25 randomly collected samples of 200 pounds will reflect each component category of mixed load MSW with at least a 95% confidence level and 2% error. This protocol was successfully tested in Monongalia County, West Virginia, to provide a “snapshot” MSW characterization during early summer.     

Maximum Ground-Level Concentrations with Downwash—Analysis

ABSTRACT

Equations derived previously for critical downwind distance x , wind speed u , and plume rise z , the values that produce maximum ground-level concentrations (MGLC) X_c under downwash conditions, have been solved. Tables of %_c, x_c, u_c, and z_c, and graphs of the relationships among u_c and z_c for a range of stack heights h_s, and building heights h_b, are presented. Results for two types of sources— a turbine and a reciprocating engine—are discussed. Some comparisons are made to the U.S. Environmental Protection Agency's (EPA) SCREEN3 model.     

Comparison and Evaluation of Chemically Speciated Mobile Source PM2.5 Particulate Matter Profiles

ABSTRACT

Mobile sources are significant contributors to ambient PM_{2 5}, accounting for 50% or more of the total observed levels in some locations. One of the important methods for resolving the mobile source contribution is through chemical mass balance (CMB) receptor modeling. CMB requires chemically speciated source profiles with known uncertainty to ensure accurate source contribution estimates. Mobile source PM profiles are available from various sources and are generally in the form of weight fraction by chemical species. The weight fraction format is commonly used, since it is required for input into the CMB receptor model. This paper examines the similarities and differences in mobile source PM_2.5 profiles that contain data for elements, ions, elemental carbon (EC) and organic carbon (OC), and in some cases speciated organics (e.g., polycyclic aromatic hydrocarbons [PAHs]), drawn from four different sources.

Notable characteristics of the mass fraction data include variability (relative contributions of elements and ions) among supposedly similar sources and a wide range of average EC:OC ratios (0.60 ± 0.53 to 1.42 ± 2.99) for light-duty gasoline vehicles (LDGVs), indicating significant EC emissions from LDGVs in some cases. For diesel vehicles, average EC:OC ratios range from 1.09 ± 2.66 to 3.54 ± 3.07. That different populations of the same class of emitters can show considerable variability suggests caution should be exercised when selecting and using profiles in source apportionment studies.     

Ozone Air Quality over North America: Part II—An Analysis of Trend Detection and Attribution Techniques

ABSTRACT

Assessment of regulatory programs aimed at improving ambient O₃ air quality is of considerable interest to the scientific community and to policymakers. Trend detection, the identification of statistically significant long-term changes, and attribution, linking change to specific clima-tological and anthropogenic forcings, are instrumental to this assessment. Detection and attribution are difficult because changes in pollutant concentrations of interest to policymakers may be much smaller than natural variations due to weather and climate. In addition, there are considerable differences in reported trends seemingly based on similar statistical methods and databases. Differences arise from the variety of techniques used to reduce nontrend variation in time series, including mitigating the effects of meteorology and the variety of metrics used to track changes. In this paper, we review the trend assessment techniques being used in the air pollution field and discuss their strengths and limitations in discerning and attributing changes in O₃ to emission control policies.     

Ozone Air Quality over North America: Part I—A Review of Reported Trends

ABSTRACT

Ozone and precursor trends can be used to measure the effectiveness of regulatory programs that have been implemented. In this paper, we review trends in the concentrations of O₃, NO_x, and HCs over North America that have been reported in the literature. Although most existing trend studies are confounded by meteorological variability, both the raw data trends and the trends adjusted for meteorology collectively indicate a general decreasing trend in O concentrations in most areas of the United States during 1985-1996. In Canada, mean daily maximum 1-hr O₃ concentrations at urban sites show mixed trends with a majority of sites showing an increase from 1980 to 1993. Mean daily maximum 1-hr O₃ at most regionally representative Canadian sites appears to decrease from 1985 to 1993 or shows no significant change. There are far fewer data and analyses of NO_x and HC trends. Available studies covering various ranges of years indicate decreases in ambient NO_x and HC concentrations in Los Angeles, CA, decreases in HC concentrations in northeastern U.S. cities, and decreases in NO concentrations in Canadian cities. Two key needs are long-term HC and NO_x measurements, particularly at rural sites, and a systematic comparison of trend detection techniques on a reference data set.     

Comparisons of the Dust/Smoke Particulate that Settled Inside the Surrounding Buildings and Outside on the Streets of Southern New York City after the Collapse of the World Trade Center,September 11, 2001

Abstract

The collapse of the World Trade Center (WTC) on September 11, 2001, generated large amounts of dust and smoke that settled in the surrounding indoor and outdoor environments in southern Manhattan. Sixteen dust samples were collected from undisturbed locations inside two uncleaned buildings that were adjacent to Ground Zero. These samples were analyzed for morphology, metals, and organic compounds, and the results were compared with the previously reported outdoor WTC dust/smoke results. We also analyzed seven additional dust samples provided by residents in the local neighborhoods. The morphologic analyses showed that the indoor WTC dust/smoke samples were similar to the outdoor WTC dust/smoke samples in composition and characteristics but with more than 50% mass in the <53 μm size fraction. This was in contrast to the outdoor samples that contained >50% of mass above >53 μm. Elemental analyses also showed the similarities, but at lower concentrations. Organic compounds present in the outdoor samples were also detected in the indoor samples. Conversely, the resident-provided convenience dust samples were different from either the WTC indoor or outdoor samples in composition and pH, indicating that they were not WTC-affected locations. In summary, the indoor dust/smoke was similar in concentration to the outdoor dust/smoke but had a greater percentage of mass <53 μm in diameter.     

Stratospheric ozone,global warming,and the principle of unintended consequences—An ongoing science and policy story

Supplemental Materials: Supplemental materials are available for this paper. Go to the publisher's online edition of the Journal of the Air & Waste Management Association.      

Radiosynthesis of perfluorooctanesulfonate (PFOS) and perfluorobutanesulfonate (PFBS), including solubility, partition and adhesion studies

Here, we describe for the first time the synthesis of [³⁵S] PFOS and [³⁵S] PFBS with sulfur-35 enriched sulfur dioxide as the radiolabelled reagent, resulting in 2.5 and 2.3 mCi of product, respectively. Basic information concerning the physicochemical properties of perfluorooctanesulfonate (PFOS), perfluorobutanesulfonate (PFBS) and perfluorooctanoic acid (PFOA) are still limited. Hence, we utilized these radiolabelled perfluoroalkanesulfonates (PFSAs), as well as carbon-14 labelled perfluorooctanoic acid ([¹⁴C] PFOA) to determine some basic characteristics of physiological and experimental significance.The solubility of PFOS in buffered aqueous solutions at pH 7.4 was found to be severely reduced in the presence of potassium and sodium ions, which, however, did not reduce the solubility of PFOA or PFBS. PFOS was found to adhere to a small extent to polypropylene and polystyrene, whereas no such adhesion of PFOA or PFBS was detected. The extents of adhesion of PFOS and PFOA to glass were found to be 20% and 10%, respectively. For the first time, the partition coefficients for PFOS, PFBS and PFOA between n-octanol and water were determined experimentally, to be −0.7, −0.3, and 1.4, respectively, reflecting the difference in the amphiphilic natures of these molecules.     

Ambient ozone effects on gas exchange and total non-structural carbohydrate levels in cutleaf coneflower (Rudbeckia laciniata L.) growing in Great Smoky Mountains National Park

Ozone-sensitive and -tolerant individuals of cutleaf coneflower (Rudbeckia laciniata L.) were compared for their gas exchange characteristics and total non-structural carbohydrates at Purchase Knob, a high elevation site in Great Smoky Mountains National Park, USA. Photosynthesis and stomatal conductance decreased with increased foliar stipple. Sensitive plants had lower photosynthetic rates for all leaves, except the very youngest and oldest when compared to tolerant plants. Stomatal conductance decreased with increasing leaf age, but no ozone-sensitivity differences were found. Lower leaves had less starch than upper ones, while leaves on sensitive plants had less than those on tolerant plants. These results show that ambient levels of ozone in Great Smoky Mountains National Park can adversely affect gas exchange, water use efficiency and leaf starch content in sensitive coneflower plants. Persistence of sensitive genotypes in the Park may be due to physiological recovery in low ozone years.     

An overview of experimental results and dispersion modelling of nanoparticles in the wake of moving vehicles

Understanding the transformation of nanoparticles emitted from vehicles is essential for developing appropriate methods for treating fine scale particle dynamics in dispersion models. This article provides an overview of significant research work relevant to modelling the dispersion of pollutants, especially nanoparticles, in the wake of vehicles. Literature on vehicle wakes and nanoparticle dispersion is reviewed, taking into account field measurements, wind tunnel experiments and mathematical approaches.Field measurements and modelling studies highlighted the very short time scales associated with nanoparticle transformations in the first stages after the emission. These transformations strongly interact with the flow and turbulence fields immediately behind the vehicle, hence the need of characterising in detail the mixing processes in the vehicle wake. Very few studies have analysed this interaction and more research is needed to build a basis for model development. A possible approach is proposed and areas of further investigation identified.