Climate and international trade policies when emissions affect production possibilities

In this paper, we develop a model of international trade and climate change in which emission discharges arising from production have a feedback effect on national production sectors by impacting upon effective factor endowments. With this context, the objectives are, first, to provide a general characterization of Pareto-efficient climate and trade policies and, second, to examine the possibility – starting from non-Pareto-efficient equilibria – for Pareto-improving environmental policies. We provide conditions under which several particular reforms of carbon taxes are welfare improving.     

Economic models for climate policy analysis: A critical discussion

Climate policy analysis has come to rely heavily on large‐scale numerical simulation models of increasing complexity, posing a challenge to policy‐makers and other non‐specialists who must interpret and apply the models. This paper provides a “user's guide” to economic models used in climate analysis. We review basic features, underlying design issues, and basic research questions bearing on the models' foundations. We also provide an overview of five such global or world models currently in use.     

Effectiveness of a Coral-Derived Surfacing Material for Reducing Sediment Production on Unpaved Roads, Schoffield Barracks, Oahu, Hawaii

This study evaluated the effectiveness of two application rates of a coral-derived surfacing material for both traffic and nontraffic road conditions using simulated rainfall (110–120 mm h⁻¹ for 30–90 min) on 0.75-m (wide) × 5.0-m (long) plots of similar slope (roughly 0.1 m m⁻¹). The coral is a locally available material that has been applied to unpaved roads surfaces on Schoffield Barracks, Oahu, Hawaii (USA), where this experiment was conducted. The simulations show that compared with a bare control plot, the coral-based surface application rates of 80 and 160 kg m⁻² (equivalent to only 10- and 20-mm thicknesses) reduced road sediment production by 75% and 95%, respectively, for nontraffic conditions. However, after two passes of the research vehicle during wet conditions, sediment production rates for the two coral treatments were not significantly different from those on the bare road plots. The overall effectiveness of the coral-derived surfacing material is unsatisfactory, primarily because the on-road surface thickness associated with the application rates tested was too small. These rates were selected to bracket those applied to training roads in the study area. Furthermore, the composition of the coral-based material does not facilitate the development of a sealed, erosion-resistant surface. When applied at the low rates tested, the coral material breaks down under normal traffic conditions, thereby losing its ability to counter shearing forces exerted by overland flow on long hillslopes where erosion measures are most needed. These simulations, combined with observations on roads in the study area, indicate that this material is not an appropriate road surfacing material for the site—at least for the low application rates examined. These results are preliminary; extended testing of higher applications rates at the hillslope scale under natural climate and traffic conditions is needed to better judge the effectiveness of this material over time.     

Creating Defensible Space in the Wildland–Urban Interface: The Influence of Values on Perceptions and Behavior

We examined the effect that value orientation to forests and wildland fire management has on an individual’s decision to create defensible space around his or her residence in the wildland–urban interface. Using data from a mail-back questionnaire, respondents in north central Minnesota were clustered by basic value–laden beliefs toward forest and wildland fire management and compared across a number of perceptions and behaviors related to creating defensible space around residences. Value orientation groups differed in attitudes, subjective norms, and perceived behavior control toward creating defensible space. In addition, relative effects of these perceptions on intention to create defensible space differed across groups. Implications lie in (a) understanding differences in motivations and reasons for support of strategies for managing fires near the wildland–urban interface, (b) developing information designed to address the perspectives of different groups related to creating defensible space, and (c) contributing to an improved integration of land management and public concerns and interests.     

Temperature and air velocity effects on ethanol emission from corn silage with the characteristics of an exposed silo face

Volatile organic compounds (VOCs) from agricultural sources are believed to be an important contributor to tropospheric ozone in some locations. Recent research suggests that silage is a major source of VOCs emitted from agriculture, but only limited data exist on silage emissions. Ethanol is the most abundant VOC emitted from corn silage; therefore, ethanol was used as a representative compound to characterize the pattern of emission over time and to quantify the effect of air velocity and temperature on emission rate. Ethanol emission was measured from corn silage samples removed intact from a bunker silo. Emission rate was monitored over 12 h for a range in air velocity (0.05, 0.5, and 5 m s^?1) and temperature (5, 20, and 35 °C) using a wind tunnel system. Ethanol flux ranged from 0.47 to 210 g m^?2 h^?1 and 12 h cumulative emission ranged from 8.5 to 260 g m^?2. Ethanol flux was highly dependent on exposure time, declining rapidly over the first hour and then continuing to decline more slowly over the duration of the 12 h trials. The 12 h cumulative emission increased by a factor of three with a 30 °C increase in temperature and by a factor of nine with a 100-fold increase in air velocity. Effects of air velocity, temperature, and air-filled porosity were generally consistent with a conceptual model of VOC emission from silage. Exposure duration, temperature, and air velocity should be taken into consideration when measuring emission rates of VOCs from silage, so emission rate data obtained from studies that utilize low air flow methods are not likely representative of field conditions.     

Participant-based monitoring of indoor and outdoor nitrogen dioxide,volatile organic compounds,and polycyclic aromatic hydrocarbons among MICA-Air households

The Mechanistic Indicators of Childhood Asthma (MICA) study in Detroit, Michigan introduced a participant-based approach to reduce the resource burden associated with collection of indoor and outdoor residential air sampling data. A subset of participants designated as MICA-Air conducted indoor and outdoor residential sampling of nitrogen dioxide (NO₂), volatile organic compounds (VOCs), and polycyclic aromatic hydrocarbons (PAHs). This participant-based methodology was subsequently adapted for use in the Vanguard phase of the U.S. National Children’s Study. The current paper examines residential indoor and outdoor concentrations of these pollutant species among health study participants in Detroit, Michigan.Pollutants measured under MICA-Air agreed well with other studies and continuous monitoring data collected in Detroit. For example, NO₂ and BTEX concentrations reported for other Detroit area monitoring were generally within 10–15% of indoor and outdoor concentrations measured in MICA-Air households. Outdoor NO₂ concentrations were typically higher than indoor NO₂ concentration among MICA-Air homes, with a median indoor/outdoor (I/O) ratio of 0.6 in homes that were not impacted by environmental tobacco smoke (ETS) during air sampling. Indoor concentrations generally exceeded outdoor concentrations for VOC and PAH species measured among non-ETS homes in the study. I/O ratios for BTEX species (benzene, toluene, ethylbenzene, and m/p- and o-xylene) ranged from 1.2 for benzene to 3.1 for toluene. Outdoor NO₂ concentrations were approximately 4.5 ppb higher on weekdays versus weekends. As expected, I/O ratios pollutants were generally higher for homes impacted by ETS.These findings suggest that participant-based air sampling can provide a cost-effective alternative to technician-based approaches for assessing indoor and outdoor residential air pollution in community health studies. We also introduced a technique for estimating daily concentrations at each home by weighting 2- and 7-day integrated concentrations using continuous measurements from regulatory monitoring sites. This approach may be applied to estimate short-term daily or hourly pollutant concentrations in future health studies.     

Preparation and X-ray structural characterization of further stereoisomers of 1,2,5,6,9,10-hexabromocyclododecane

Technical 1,2,5,6,9,10-hexabromocyclododecane (HBCD) consists largely of three diastereomers (α-, β-, and γ-HBCD) produced by the trans addition of bromine to cis,trans,trans-cyclododeca-1,5,9-triene (CDT). However, another seven diastereomers are theoretically possible and may be produced by trans addition of bromine across the double bonds of the other three isomers of 1,5,9-CDT. There are indications that small amounts of the minor HBCD isomers may be present in commercial HBCD mixtures or in products containing this brominated flame retardant (BFR). Such minor components may indeed derive from traces of other 1,5,9-CDTs in the cis, trans, trans starting material, however their formation may also be possible through isomerizations during the processing of this BFR or by bioisomerization subsequent to its release into the environment. Two of the seven additional diastereomers (δ- and ε-HBCD) were synthesized previously from trans,trans,trans-CDT. We now report the preparation of the remaining five diastereomers, ζ-, η-, and θ-HBCD from cis,cis,trans-CDT and ι- and κ-HBCD from cis,cis,cis-CDT, and their characterization by ¹H NMR spectroscopy and X-ray crystallography. The availability of these further diastereomers of HBCD should aid in determining if the minor isomers are present in commercial samples of this BFR, in products containing HBCDs, or in environmental samples. We have also carried out an X-ray crystal structure determination on ε-HBCD, so that crystal structures are now available for all 10 HBCD diastereomers.     

Transcriptional profiles induced by the Aryl Hydrocarbon Receptor agonists 2,3,7,8-tetrachlorodibenzo-p-dioxin, 2,3,7,8-tetrachlorodibenzofuran and 2,3,4,7,8-pentachlorodibenzofuran in primary rat hepatocytes

Toxicogenomics was used to examine mRNA expression profiles obtained from primary rat hepatocytes treated for 24 h with 0.01 or 1.0 nM 2,3,7,8-tetrachlorodibenzo-p-dioxin (2,3,7,8-TCDD), 0.02 or 2.0 nM 2,3,4,7,8-pentachlorodibenzofuran (2,3,4,7,8-PeCDF) and 0.1 or 10 nM 2,3,7,8-tetrachlorodibenzofuran (2,3,7,8-TCDF). The concentrations of 2,3,4,7,8-PeCDF and 2,3,7,8-TCDF were chosen to be equivalent to 2,3,7,8-TCDD’s concentration based on the toxic equivalency factor/toxic equivalent (TEF/TEQ) method for estimating biological potency. 2,3,7,8-TCDD at 1.0 nM altered the expression of 533 genes; 2,3,4,7,8-PeCDF at 2.0 nM altered 182 genes, and 2,3,7,8-TCDF at 10 nM altered 154 genes. Of these, 57 genes were affected by all three congeners. Agglomerative hierarchical clustering revealed distinct congener-dependent gene subclusters. Principal components analyses of the microarray data revealed that these congeners cluster independently of one another. Data presented here demonstrate that equivalent TEQ concentrations of 2,3,7,8-TCDD, 2,3,4,7,8-PeCDF and 2,3,7,8-TCDF, while altering the expression of a small battery of genes in common, also produce substantial congener specific alterations in gene expression.     

Concentrations and loadings of polybrominated diphenyl ethers in dust from low-income households in California

California residents may experience the highest polybrominated diphenyl ether (PBDE) flame retardant exposures in the United States, the nation with the highest body burdens worldwide. It is hypothesized that Californians' high exposures are due to the state's strict furniture flammability standards. Ingestion of PBDE-contaminated dust, to which children may be particularly susceptible, is a dominant exposure pathway. Low-income populations may also face disparately high exposures due to the presence of older, deteriorated or poorly manufactured furniture treated with PBDEs. We collected up to two dust samples per home (54 samples total), several days apart, from low-income California households in the urban community of Oakland (n=13 homes) and the agricultural community of Salinas (n=15 homes). We measured BDE-47, BDE-99 and BDE-100, the major constituents of the penta-PBDE flame retardant formulation commonly used in furniture. All three PBDE congeners were detected in every sample with concentrations (loadings) ranging from 185 to 126,000ng/g (621-264,000ng/m(2)), 367-220,000ng/g (1550-457,000ng/m(2)), and 84-41,100ng/g (257-85,700ng/m(2)) for BDE-47, BDE-99 and BDE-100, respectively. Median concentrations (loadings) observed in Salinas homes for BDE-47, BDE-99 and BDE-100 were 3100ng/g (10,800ng/m(2)), 5480ng/g (19,500ng/m(2)), and 1060ng/g (3810ng/m(2)), respectively, and in Oakland homes 2780ng/g (10,700ng/m(2)), 4450ng/g (19,100ng/m(2)), and 1050ng/g (4000ng/m(2)), respectively. Maximum concentrations for BDE-47 and BDE-99 are the highest reported to date. Indoor concentrations and loadings did not significantly differ between communities; concentrations and loadings were strongly correlated between collections for all three congeners (Spearman rho=0.79-0.97, p<0.002). We estimated non-dietary ingestion of each congener for one child in each home (n=28 children) and found that estimated intake for BDE-47 and BDE-99 exceeded the U.S. Environmental Protection Agency's recommended chronic reference dose for three and five children, respectively. Children's estimated intake via dust ranged from 1.0 to 599ng/kg/day, 2.0-1065ng/kg/day and 0.5-196ng/kg/day for BDE-47, BDE-99 and BDE-100, respectively. In order to mitigate these exposures, future research must address the factors that contribute to PBDE exposures in low-income homes.