Trace analysis of dissolved polychlorinated organic compounds in the water of the Yangtse River (Nanjing, China)

Eighteen organochlorine contaminants from the water samples of the Yangtse River have been qualitatively and quantitatively analyzed. The analysis of polychlorinated organic compounds (PCOCs) extracted by C18 Solid Phase Extract (SPE) was performed using HP6890 gas chromatograph coupled by ECD detector. The analytical results demonstrate that the analytical methods are reliable based on the fact that most of the recoveries for the targeted compounds are 60-90%. Most of the concerned contaminants, i.e. chlorinated pesticides and PCBs were found in the water samples of the Yangtse River, but their concentration was very low, <2.97 ng l(-1), which is far less than 1 microg l(-1)--the standard of drinking water of China. It is apparent that the PCOCs were in high concentration during the dry season, and in low concentration during the rainy season. The situation of PCOCs contamination in the water of the Yangtse River in 1999 was greatly improved in comparison with 10 years ago.     

Effects of leachate recirculation on biogas production from landfill co-disposal of municipal solid waste,sewage sludge and marine sediment

Leachate recirculation is an emerging technology associated with the management of landfill. The impact of leachate recirculation on the co-disposal of three major wastes (municipal solid waste, sewage sludge and sediment dredgings) was investigated using a laboratory column study. Chemical parameters (pH, COD, ammoniacal-N, total-P) and gas production (total gas volume, production rates and concentrations of CH4 and CO2) were monitored for 11 weeks. Leachate recirculation reduced waste-stabilization time and was effective in enhancing gas production and improving leachate quality, especially in terms of COD. The results also indicated that leachate recirculation could maximize the efficiency and waste volume reduction rate of landfill sites.     

Meteorological effects on the evolution of high ozone episodes in the greater Seoul area

Three high O3 episodes--7 days in 1992 (July 3-July 9), 9 days in 1994 (July 21-July 29), and another 3 days in 1994 (August 22-August 24)--were selected on the basis of morning (7:00 a.m.-10:00 a.m.) average wind direction and speed and daily maximum O3 concentrations in the greater Seoul, Korea, of 1990-1997. To better understand their characteristics and life cycles, surface data from the Seoul Weather Station (SWS) and surface and 850-hPa wind field data covering northeast Asia around the Korean Peninsula were used for the analysis. In the July 1992 episode, westerly winds were most frequent as a result of the influence of a high-pressure system west of the Korean Peninsula behind a trough. In contrast, in the July 1994 episode, easterly winds were most frequent as a result of the effect of a typhoon moving north from the south of Japan. Despite different prevailing wind directions, the peak O3 concentrations for each episode occurred when a sea/land breeze developed in association with weak synoptic forcing. The August 1994 episode, which was selected as being representative of calm conditions, was another typical example in which a well-developed     

Chemical speciation and extractability of Zn,Cu and Cd in two contrasting biosolids-amended clay soils

An incubation experiment was conducted to study the chemical speciation and extractability of three heavy metals in two contrasting biosolids-amended clay soils. One was a paddy soil of pH 7.8 and the other was a red soil of pH 4.7 collected from a fallow field. Anaerobically digested biosolids were mixed with each of the two soils at three rates: 20, 40 and 60 g kg(-1) soil (DM basis), and unamended controls were also prepared. The biosolids-amended and control soils were incubated at 70% of water holding capacity at 25 degrees C for 50 days. Separate subsamples were extracted with three single extractants and a three-step sequential extraction procedure representing acetic acid (HOAc)-soluble, reducible and oxidisable fractions to investigate the extractability and speciation of the heavy metals. As would be expected, there were good relationships between biosolids application rate and metal concentrations in the biosolids-amended soils. The three heavy metals had different extractabilities and chemical speciation in the two biosolids-amended soils. Ethylene diamine tetraacetic acid extracted more Cu, Zn and Cd than did the other two single extractants. The oxidisable fraction was the major fraction for Cu in both biosolids-amended soils and the HOAc-soluble and reducible fractions accounted for most of the Zn. In contrast, Cd was present mainly in the reducible fraction. The results are discussed in relation to the mobility and bioavailability of the metals in polluted soils.     

Nitrous oxide flux from landfill leachate-sawdust nitrogenous compost

Composted nitrogenous waste has the potential to produce excessive amounts of nitrous oxide (N2O), a potent greenhouse gas that also contributes to stratospheric ozone depletion. In this laboratory study, sawdust was irrigated with varying amounts of landfill leachate with high NH4+-N content (3950 mg l(-1)). Physicochemical properties, including the amount of N2O produced, were monitored during the composting process over 28 days. A rapid decline in NH4+-N in the first 4 days and increasing NO3--N for 11 days was followed by lower but stabilized levels of available-N, even with repeated leachate irrigation. Less than 0.03% of the leachate-applied N was lost as N2O. Higher leachate applications as much as tripled N2O production, but this represented a lesser proportion overall of the total nitrogen. Addition of glucose to the composting process had no significant effect on N2O production. The derived sawdust-leachate compost supported healthy growth of Sesbania rostrata. It is concluded that compost can be produced from sawdust irrigated with landfill leachate without substantial emission of N2O, although excessive flux of N2O remains about high application rates over longer time periods.     

Comparison of quantitation of polychlorinated dibenzodioxins and polychlorinated dibenzofurans in complex environmental samples by high resolution gas chromatography with flame ionization, electron capture and mass spectrometric detection

A complete separation of PDDD and PCDF from a complex sample matrix by a two-step HPLC clean-up procedure shows the feasibility of analysis of PCDD and PCDF using less expensive instruments. This is demonstrated by a comparison of quantitative results of PCDD and PCDF in a complex flyash sample analyzed using GC/FID, GC/ECD, and GC/MSD.     

An approach for treating the uncertainties in the impact of climate change

Past accumulated data supported by the predictions of climate models suggest that our world is getting warmer. Scientists are trying to construct mathematical models of both climate and crop systems to identify what types of climate changes could constitute a significant risk or benefit for agriculture. However, due to the many uncertainties regarding these models, it is impossible to make unequivocal predictions. At present, almost all the research in this area is carried out without considering the uncertain nature of the problem. The approach outlined here attempts to find a way to deal with the above uncertainty problem. Artificial intelligence techniques are being developed with the aim of performing inferences based on uncertain information. In our method, causal graphs are used for explicit representation of the relationships between climatic factors and yield. Probabilities are used to express the uncertainties associated with these links, and Bayes' theorem is applied to deal with uncertainty reasonings. This approach has the additional advantage of allowing the prediction to be readily updated as results from improved climate and crop models become available. These opportunities are being evaluated initially by using the model for potato growth developed at the Scottish Crop Research Institute.     

Maximum nitrogen removal in the step-feed activated sludge process.

This paper presents a mathematical framework that can be used to determine the flow distributions for a step-feed activated sludge process that result in maximum nitrogen removal. The model indicates that nitrogen removal efficiency in a step-feed activated sludge process is highly dependent on the ultimate biochemical oxygen demand (BOD(L))-to-total Kjeldahl nitrogen (TKN) ratio of the wastewater. For typical domestic wastewater, which has a relatively high BOD(L)-to-TKN ratio, the step-feed process will outperform the Modified Ludzack-Ettinger process for nitrogen removal, when the flow to each step is optimally distributed. Using plant-specific water quality data and operating conditions from a 1-year period, nitrogen removal performance for four step-feed activated sludge plants operated by the Sanitation Districts of Los Angeles County (California) was calculated using the developed model. The calculated nitrogen removal efficiencies match well with the actual plant performance data. These results validate the model as a useful tool for predicting nitrogen removal in a step-feed activated sludge process. Other analyses revealed that improvements in nitrogen removal at existing facilities are achievable by adjusting the split of primary effluent flow to each anoxic zone several times during the day. The timing of the adjustments and the optimal flow splits can be determined from data on diurnal fluctuations in BOD(L) and TKN concentrations. An example is provided to illustrate the application of such an operating strategy and the potential enhancement of nitrogen removal.     

Microbial kinetic analysis of three different types of EBNR process

The disadvantages of developed biological nutrient removal (BNR) processes (additional energy for liquid circulation and addition of external carbon substrate for denitrification in anoxic zones) were improved by reconfiguring the process into (1) an anaerobic zone followed by multiple stages of aerobic-anoxic zones (TNCU3 process) or (2) anaerobic, oxic, anoxic, oxic zones in sequence (TNCU2 process). These two pilot plants were operated at a recycling sludge ratio of 0.5 without internal recycle of nitrified supernatant. The sludge retention time was maintained at 10 d. The main objective of this study is to analyze the kinetics of different microorganisms in these two processes and A2O process by using the Activated Sludge Model No. 2d. The effective removal efficiency of carbon, total phosphorus and total nitrogen at 87-98%, 92-100% and 63-80%, respectively, were achieved in the testing runs. According to model simulations, the microbial kinetics in the TNCU3 and TNCU2 processes would be affected by different operations. When the step feeding strategy was adopted, the HRT was longer due to the less influent flowrate in the front stages and the microbes would grow in quantities by about 6% in the aerobic reactors. In the followed anoxic reactors, the microbes would decrease in quantities by about 12% due to the dilution effect. The dilution effects in TNCU3 and TNCU2 processes did not take place in A2O process because the recycling mixed liquid from the aerobic reactor to the anoxic reactor still contained particulate components. The XH, XPAO, and XAUT concentrations in the effluent of the last tank were lower when the step-feeding mode was adopted. The TNCU3 and TNCU2 processes could be operated efficiently without nitrified liquid circulation and addition of external carbon substrate for denitrification.