Chronic toxicity of octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX) in soil determined using the earthworm (Eisenia andrei) reproduction test

The sublethal and chronic effects of the environmental contaminant and explosive octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX) in artificial soil were assessed using the earthworm (Eisenia andrei). Based on various reproduction parameters (total and hatched number of cocoons, number of juveniles and their biomass), fecundity was reduced at the different concentrations of HMX tested (from 280.0 +/- 12.3 to 2502.9 +/- 230.0 mg kg-1 dry soil) in spiked artificial soil (LOEC: 280.0 +/- 12.3 mg kg-1 dry soil). The growth of adult E. andrei was also reduced at the different concentrations tested, though no mortality occurred, even at the highest tested concentrations. The number of juveniles produced was correlated with the number of total and hatched cocoons, and the biomass of juveniles was correlated with the number of cocoons. Pooled results of these and earlier studies on explosives (TNT, RDX) using the E. andrei reproduction test confirm that effects of HMX on cocoon production are indicative of some reproductive consequences (number of juvenile and their biomass), whereas adult growth, in general, does not correlate strongly with change in reproduction capacity.     

Levels of PCDDs and PCDFs in two kinds of fast foods in Korea

We initiated an attempt to gather preliminary Korean fast food data on the concentrations, whole weight and international toxic equivalent (TEQ), in two kinds of fast foods, hamburger and fried chicken. The levels of polychlorinated dibenzo-p-dioxins/polychlorinated dibenzofurans (PCDDs/PCDFs) in hamburgers are detected to be lower than in fried chickens. Total TEQ level of PCDDs in fried chicken is 47.45 times higher than in hamburger. In case of PCDFs, it is 48.61 times. Even though these are compared to the only one brand and three samples each, we think that these high levels of PCDDs/PCDFs in fried chicken are very important data because of the potentially increasing daily intake. If we continue to survey for PCDDs/PCDFs in fast foods more even, especially fried chicken, these data will be useful to calculate the estimated daily intake of TEQ levels of PCDDs/PCDFs in Korea.     

Solubilization of substituted indole compounds by beta-cyclodextrin in water

The solubilization of four pairs of substituted indole compounds (SICs) by β-cyclodextrin (β-CD) in water was investigated. The results show that 1,2,3,4-tetrahydrocarbazole and N-methyl-1,2,3,4-tetrahydrocarbazole form 1:1 inclusion complexes with β-CD, while the other six SICs form 1:2 inclusion complexes, respectively. To each pair of SICs with similar structures, the differences between their solubilization in β-CD/water solutions has been explained by the difference of their contact area within the β-CD cavity, the difference of their molecule polarity, or the presence of hydrogen bond between SIC molecule and β-CD molecule.     

Climatology of diurnal trends and vertical distribution of ozone in the atmospheric boundary layer in urban North Carolina

Vertical measurements of ozone were made on a 610-m-tall tower located about 15 km southeast of Raleigh, NC, as part of an effort by the state of North Carolina to develop a state implementation plan (SIP) for ozone control in the Raleigh Metropolitan Statistical Area. During summer 1993, 1994, and 1995, ozone was monitored at ground level, 250 m, and 433 m. Boundary layer wind, temperature, and other meteorological variable profiles were determined from balloon soundings. During summer 1996 and 1997, ozone was monitored at ground level, 76 m, 128 m, and 433 m. This paper presents the analysis and discussion of the five-year data. The evolutions of the convective boundary layer during daytime and the stable nocturnal boundary layer (NBL) were found to have marked impacts on ozone concentrations. A strong diurnal pattern, with an afternoon maximum and an early morning minimum, was dominant at ground level, but it was much weaker at elevated levels and insignificant above the NBL at night. Ozone deposition velocities at night during the measurement periods were estimated to range from 0.09 to 0.64 cm/sec. We found evidence of regional transport of ozone and/or its precursors from northwest and north of the site, which may play a role in high ozone events in the Raleigh-Durham area. Ozone concentrations between the various elevated levels were well correlated, while correlations between the ground and upper levels were much weaker. However, a strong correlation was found between the nighttime and early morning ozone concentrations (CR) in the residual layer above the NBL and the maximum ground level concentration (Co max) the following afternoon. Based on this correlation, the latter may be predicted by an observational model Co max = 27.76e 0.016 CR.     

Performance characteristics of PM10 samplers under calm air conditions

The size range of airborne particles that is closely related to specific deposition regions in the human respiratory tract and excess lung burden of these deposited particles is associated with disease. Size-selective sampling, therefore, needs to be performed to assess the related health risks. Performance criteria applied to these samplers must be well characterized in order to provide accurate and reliable results. The PM10 samplers that have been used in place of the total suspended particulate samplers for the collection of ambient air particles are more relevant to potential inhalation hazards. In order to be certified, a PM10 sampler must meet reliable performance specifications, primarily the aerosol penetration test with liquid and solid particles in a wind tunnel (wind speeds of 2, 8, and 24 km/hr). This testing is intended to assure reasonable accuracy in aerosol measurements. However, the sampler performance under calm air conditions has not been well studied. In the present study, the sampling heads of three devices--the Harvard impactor, the Personal Environmental Monitor (PEM), and the Sierra Andersen model 241 dichotomous sampler PM10 inlet head--were tested for aerosol separation efficiency. With the consideration of bias and imprecision of the measurements, five specimens of each type of sampler were chosen for performance testing, repeating the tests 5 times for each specimen. An ultrasonic atomizing nozzle was used to nebulize potassium sodium tartrate tetrahydrate and dioctyl phthalate particles as the solid and liquid challenge aerosols, respectively. The aerosol number concentrations and size distributions upstream and downstream of the samplers were measured by using an aerosizer calibrated against a settling velocity chamber. The results showed that among the samplers tested, the dichotomous sampler PM10 inlet head had the best fit to the PM10 convention, while the other two samplers not only appeared to have a steeper separation-curve slope but also had significant particle bounce when challenged with solid particles. Analysis of variance also confirmed the superiority of the dichotomous samplers. Surface-coating with oil or grease greatly reduced the problem of particle bounce.     

The study of fine and coarse particles, and metallic elements for the daytime and night-time in a suburban area of central Taiwan, Taichung

Daily average concentrations of fine and coarse particulates, and TSP samples have been measured simultaneously at daytime and night-time periods by using Universal and PS-1 sampler in a suburban area of central Taiwan from June to August 1998. The samples were analyzed by atomic absorption spectrometry to determine the fine and coarse particulate concentrations of metallic elements (Ca, Fe, Mn, Pb, Cu, Zn and Cr). The concentration of PM2.5 and TSP showed a decreased trend for the daytime period. The fine particle concentrations were about two times as that of coarse particulate concentrations. The averaged fine particulate concentrations at daytime are higher than at night-time. Ca and Fe were mostly in the coarse particulate mode. The correlation coefficients were 0.63 and 0.69 for elements Ca and Fe in the coarse particle mode for day and night periods. Pb showed a similar distribution ratio with Mn for the fine to coarse particle ratios at both day and night period. Pb and Mn are highly correlated for the day (R = 0.78) and night period (R = 0.61) at particle size <2.5 microm. Cu and Zn were mainly in fine particles at both day and night period. Fe and Ca consist of the major parts of all the elements. Elemental Mn is the lowest among the rest of the heavy metals.     

Sorption of non-ionic surfactants to soil: the role of soil mineral composition

In this study, the importance of individual soil mineral constituents on non-ionic surfactant sorption is evaluated by employing scanning electron microscopy (SEM) equipped with energy-dispersive X-ray analysis (EDAX) to observe microchemical surface composition of model soil colloids and relate surface microchemical composition to the sorption behavior of a non-ionic surfactant, Polyethylene Glyco Mono-p-nonylphenyl Ether (A9PE10), on selected model soil colloids. This information is critical to understanding the fate and transport of this class of contaminants in subsurface. Results obtained from this study indicate that a correlation between the atomic ratio of Si:(Al + Fe) on soil mineral surface and A9PE10 sorption capacity exist, where those soil with larger value of Si:(Al + Fe) ratio exhibit higher sorption capacity. This allows us to predict that the non-ionic surfactant sorption capacity for soil decrease with progressively increasing states of soil maturity.     

Effects of surfactants on extraction of phenanthrene in spiked sand

Problems associated with polynuclear aromatic hydrocarbon (PAH) contaminated site in environmental media have received increasing attention. To resolve such problems, innovative in situ methods are urgently required. This work investigated the feasibility of using surfactants to extract phenanthrene on spiked sand in a batch system. Phenanthrene was spiked into Ottawa sand to simulate contaminated soil. Six surfactants, Brij 30 (BR), Triton X-100 (TR), Tergitol NP-10 (TE), Igepal CA-720 (IG), sodium dodecyl sulfate (SDS) and hexadecyl trimethyl ammonium bromide (HTAB) were used. Adjusting the extraction time, mixing speed and surfactant concentration yielded the optimum extracting conditions. The concentration of phenanthrene was identified with HPLC. Under the experimental conditions, results indicated that those surfactants were highly promising on site remediation since the residual phenanthrene concentration was effectively reduced. The optimum operating conditions were obtained at 30 min, 125 rpm and surfactant concentrations in 4%.     

A method for removal of CO from exhaust gas using pulsed corona discharge

An experimental study of the oxidation of CO in exhaust gas from a motorcycle has been carried out using plasma chemical reactions in a pulsed corona discharge. In the process, some main parameters, such as the initial CO concentration, amplitude and frequency of pulses, residence time, reactor volume, and relative humidity (RH), as well as their effects on CO removal characteristics, were investigated. O3, which is beneficial to reducing CO, was produced during CO removal. When the exhaust gas was at ambient temperature, more than 80% CO removal efficiency was realized at an initial concentration of 288 ppm in a suitable range of the parameters.     

Trace metal speciation and bioavailability in urban soils

Urban soils often contain concentrations of trace metals that exceed regulatory levels. However, the threat posed by trace metals to human health and the environment is thought to be dependent on their speciation in the soil solution rather than the total concentration. Three inactive railway yards in Montréal, Québec, were sampled to investigate the speciation and bioavailability of Cd, Cu, Ni, Pb and Zn. Soil solutions were obtained by centrifuging saturated soil pastes. In the soil solutions, up to 59% of the dissolved Cd was in its free ionic form. For Cu, Pb and Zn, organic complexes were the predominant species. Over 40% of Ni was present as inorganic complexes if the solution pH exceeded 8.1. Multiple regression analyses showed that pH and total metals in soil were significantly correlated with the activities of free metal ions, except for Cd(2+), which only had a weak correlation with soil pH. Free, dissolved and total soil metals were tested for their ability to predict metal uptake by plants in the field. However, none of these metal pools were satisfactory predictors. The results indicated that in these urban soils, trace metals were mainly in stable forms and bioavailability was extremely low.