Varying levels of female promiscuity in four <Emphasis Type="Italic">Apodemus</Emphasis> mice species

Sexual selection in most vertebrates is based on the evolution of fitness optimization strategies such as multiple-male mating (MMM). Several ecological correlates of MMM have been identified in bird and fish populations; however, only few studies have documented the effects of environmental change on promiscuity in mammals. In this study, the 127 pregnant females from four central European and ecologically diverse species of field mice (genus Apodemus) were studied to assess the role of ecological factors that may have shaped the evolution of particular mating systems. MMM was found in all analyzed species: in Apodemus uralensis and Apodemus flavicollis, up to two males could be identified as the fathers of a particular litter, while three males sired 9.1% of analyzed litters of Apodemus sylvaticus and 20.6% of Apodemus agrarius. Furthermore, there were obvious differences between species in relative testes size and the proportion of multiple sired litters during those seasons when the opportunity for multiple mating was high. The species with the smallest testes and the least promiscuous was A. uralensis (only 43.5% of multiple sired litters), while the species with the biggest testes and the most promiscuous was A. agrarius (69.2%). MMM was significantly associated with higher litter size in A. flavicollis, and the probability of MMM strongly increased with season in A. agrarius and with abundance in A. uralensis. These results indicate that ecological factors are associated with MMM rates in Apodemus field mice and more research is needed to fully understand the evolution of mating strategies at different levels of biological resolution.     

Calibration of the Chemcatcher passive sampler for monitoring selected polar and semi-polar pesticides in surface water

Passive sampling is a powerful method for continuous pollution monitoring, but calibration experiments are still needed to generate sampling rates in order to estimate water concentrations for polar compounds. We calibrated the Chemcatcher device with an uncovered SDB-XC Empore disk as receiving phase for 12 polar and semi-polar pesticides in aquatic environments in flow-through tank experiments at two water flow velocities (0.135 m/s and 0.4 m/s). In the 14-day period of exposure the uptake of test substances in the sampler remained linear, and all derived sampling rates R(s) were in the range of 0.1 to 0.5 L/day. By additionally monitoring the release of two preloaded polar pesticides from the SDB-XC disks over time, very high variation in release kinetics was found, which calls into question the applicability of performance reference compounds. Our study expands the applicability of the Chemcatcher for monitoring trace concentrations of pesticides with frequent occurrence in water.     

Application and test of a simple tool for operational footprint evaluations

We present a user-friendly tool for footprint calculations of flux measurements in the surface layer. The calculations are based on the analytical footprint model by Kormann, R. and Meixner, F.X. [2001. An analytical footprint model for Non-neutral Stratification. Boundary-Layer Meteorology 99, 207-224]. The footprint density function of a flux sensor is determined using readily available data from standard eddy covariance measurements. This footprint density function is integrated over defined surface areas given as quadrangular polygons representing e.g. agricultural fields. We illustrate the use and performance of the tool by applying it to CO2 flux measurements with three eddy covariance system at the Swiss CarboEurope grassland site. Two flux towers were positioned in the centre of two neighbouring fields, respectively, that showed a very different CO2 flux during the study period. The third tower was located near the border of the two fields and was frequently influenced by both fields to a similar degree. The calculated footprint fractions were used to simulate the latter flux from the other two systems. The measured and simulated fluxes showed a good agreement and thus support the reliability of the footprint calculation. The presented simple footprint tool can be used as a routine quality check for flux monitoring stations influenced by surface areas with varying vegetation covers and/or land-use.     

Sorption of chlorimuron-ethyl on montmorillonite clays: effects of exchangeable cations,pH, and ionic strength

Sorption interaction of chlorimuron-ethyl with montmorillonite clays was investigated under varied types of exchangeable cation, pH, and ionic strength conditions. Chlorimuron-ethyl sorption on bentonites exhibited pronounced cation dependency, and the sorption ability increased as the sequence Ca²⁺- < Na⁺- < Al³⁺- < Fe³⁺-bentonite, due to different sorption mechanisms, whereas the cation dependency was influenced by the clay type and much weaker for montmorillonites. The decrease of pH at the range of 4.0–6.0 prominently increased sorption of chlorimuron-ethyl on all cation-exchanged montmorillonite clays, and nearly a neglected sorption (about 2 %) can be observed at pH over 7.0. In the presence of CaCl₂, sorption of chlorimuron-ethyl on Fe³⁺-bentonite was promoted because of complexion of Ca²⁺ and the surface of Fe³⁺-bentonite. However, as the concentration of CaCl₂ increased, chlorimuron-ethyl sorption on Ca²⁺- and Fe³⁺-exchanged bentonite decreased, suggesting that Ca bridging was not the prevailing mechanism for sorption of chlorimuron-ethyl on these clays. Furthermore, chlorimuron-ethyl sorption was relatively sensitive to pH, and the change of pH may obscure effect of other factors on the sorption, so it was quite necessary to control pH at a constant value when the effect of other factor was being studied.     

Use of semipermeable membrane devices (SPMDs)

Triolein-containing semipermeable membrane devices (SPMDs) were employed as passive samplers to provide data on the bioavailable fraction of organic, waterborne, organochlorine pesticides (OCPs), polychlorinated biphenyls (PCBs) and polynuclear aromatic hydrocarbons (PAHs) in streams flowing through a highly polluted industrial area of Bitterfeld in Saxony-Anhalt, Germany. The contamination of the region with organic pollutants originates in wastewater effluents from the chemical industry, from over one-hundred years of lignite exploitation, and from chemical waste dumps. The main objective was to characterise time-integrated levels of dissolved contaminants, to use them for identification of spatial trends of contamination, and their relationship to potential pollution sources. SPMDs were deployed for 43 days in the summer of 1998 at four sampling sites. The total concentration of pollutants at sampling sites was found to range from a low of 0.8 microgram/SPMD to 25 micrograms/SPMD for PAHs, and from 0.4 microgram/SPMD to 22 micrograms/SPMD for OCPs, respectively. None of the selected PCB congeners was present at quantifiable levels at any sampling site. A point source of water pollution with OCPs and PAHs was identified in the river system considering the total contaminant concentrations and the distribution of individual compounds accumulated by SPMDs at different sampling sites. SPMD-data was also used to estimate average ambient water concentrations of the contaminants at each field site and compared with concentrations measured in bulk water extracts. The truly dissolved or bioavailable portion of contaminants at different sampling sites ranged from 4% to 86% for the PAHs, and from 8% to 18% for the OCPs included in the estimation. The fraction of individual compounds found in the freely dissolved form can be attributed to the range of their hydrophobicity. In comparison with liquid/liquid extraction of water samples, the SPMD method is more suitable for an assessment of the background concentrations of hydrophobic organic contaminants because of substantially lower method quantification limits. Moreover, contaminant residues sequestered by the SPMDs represent an estimation of the dissolved or readily bioavailable concentration of hydrophobic contaminants in water, which is not provided by most analytical approaches.     

Concentrations of polybrominated diphenyl ethers, organochlorine compounds and nitro musks in mother's milk from Germany (Bavaria)

The aim of this study was to determine a new spectrum of substances that will be selected for future breast milk monitoring in Bavaria, Germany. Up to now, the analysis of breast milk in Bavaria was limited to selected organochlorine pesticides (OCP) and polychlorinated biphenyls (PCB). Information on background levels of toxicologically interesting substances, such as dioxins and dioxin-like polychlorinated biphenyls (dl-PCB) or on flame retardants, such as polybrominated diphenyl ethers (PBDE) are very limited or not available for Bavaria. We present here levels on OCP, some nitro musks, indicator PCB, polychlorinated dibenzo-p-dioxins (PCDD), polychlorinated dibenzofurans (PCDF) and dl-PCB concentrations in breast milk collected at 12 weeks post-partum of 43 primiparous mothers living in Bavaria. The average concentrations of PCDD, PCDF and dl-PCB were 4.98, 4.93 and 9.92 pg WHO-TEQ g(-1) lipid, respectively. The mean contribution of PCDD, PCDF, non-ortho and mono-ortho PCB to the total WHO-TEQ is consistently about 25% each. Furthermore the concentration on PBDE in breast milk at two sampling points, 12 weeks and 16 weeks after delivery, were determined. Overall, 19 PBDE congeners were analysed, however the level of 12 PBDE congeners were below the limit of detection. BDE-153 and BDE-47 were the predominant congeners accounting for about 66% of the total PBDE. The means of the total concentrations of PBDE (five congeners) at the first and second sampling point were 1.90 and 2.03 ng g(-1) lipid, respectively. Based on our results the overall concentrations of the analysed substances in milk samples from Bavaria are consistent with the levels of breast milk samples of other European countries reflecting the low background body burden of these compounds.