Technoeconomic aspects of alternative municipal solid wastes treatment methods

This paper considers selected treatment technologies for comingled domestic and similar wastes and provides technoeconomic data and information, useful for the development of strategic management plans. For this purpose, treatment technologies of interest are reviewed and representative flow diagrams, along with material and energy balances, are presented for the typical composition of wastes in Greece; possible difficulties in the use of treatment products, along with their management implications, are discussed, and; cost functions are developed, allowing assessment of the initial capital investment and annual operating costs. Based on the latter, cost functions are developed for predicting the normalized treatment costs of alternative methods (in €/t of MSW treated), as function of the quantity of MSW processed by plants built and operated (a) by municipality associations, and (b) by private enterprises. Finally, the alternative technologies considered are evaluated on the basis of their cost aspects, product utilization and compatibility with the EU waste framework Directive 2008/98.     

Assessment of the methane oxidation capacity of compacted soils intended for use as landfill cover materials

The microbial oxidation of methane in engineered cover soils is considered a potent option for the mitigation of emissions from old landfills or sites containing wastes of low methane generation rates. A laboratory column study was conducted in order to derive design criteria that enable construction of an effective methane oxidising cover from the range of soils that are available to the landfill operator. Therefore, the methane oxidation capacity of different soils was assessed under simulated landfill conditions. Five sandy potential landfill top cover materials with varying contents of silt and clay were investigated with respect to methane oxidation and corresponding soil gas composition over a period of four months. The soils were compacted to 95% of their specific proctor density, resulting in bulk densities of 1.4-1.7 g cm⁻³, reflecting considerably unfavourable conditions for methane oxidation due to reduced air-filled porosity. The soil water content was adjusted to field capacity, resulting in water contents ranging from 16.2 to 48.5 vol.%. The investigated inlet fluxes ranged from 25 to about 100 g CH₄ m⁻² d⁻¹, covering the methane load proposed to allow for complete oxidation in landfill covers under Western European climate conditions and hence being suggested as a criterion for release from aftercare. The vertical distribution of gas concentrations, methane flux balances as well as stable carbon isotope studies allowed for clear process identifications. Higher inlet fluxes led to a reduction of the aerated zone, an increase in the absolute methane oxidation rate and a decline of the relative proportion of oxidized methane. For each material, a specific maximum oxidation rate was determined, which varied between 20 and 95 g CH₄ m⁻² d⁻¹ and which was positively correlated to the air-filled porosity of the soil. Methane oxidation efficiencies and gas profile data imply a strong link between oxidation capacity and diffusive ingress of atmospheric air. For one material with elevated levels of fine particles and high organic matter content, methane production impeded the quantification of methane oxidation potentials. Regarding the design of landfill cover layers it was concluded that the magnitude of the expected methane load, the texture and expected compaction of the cover material are key variables that need to be known. Based on these, a column study can serve as an appropriate testing system to determine the methane oxidation capacity of a soil intended as landfill cover material.     

Incorporating connectivity into conservation planning for the optimal representation of multiple species and ecosystem services

Conservation planning tends to focus on protecting species’ ranges or landscape connectivity but seldom both—particularly in the case of diverse taxonomic assemblages and multiple planning goals. Therefore, information on potential trade-offs between maintaining landscape connectivity and achieving other conservation objectives is lacking. We developed an optimization approach to prioritize the maximal protection of species’ ranges, ecosystem types, and forest carbon stocks, while also including habitat connectivity for range-shifting species and dispersal corridors to link protected area. We applied our approach to Sabah, Malaysia, where the state government mandated an increase in protected-area coverage of approximately 305,000 ha but did not specify where new protected areas should be. Compared with a conservation planning approach that did not incorporate the 2 connectivity features, our approach increased the protection of dispersal corridors and elevational connectivity by 13% and 21%, respectively. Coverage of vertebrate and plant species’ ranges and forest types were the same whether connectivity was included or excluded. Our approach protected 2% less forest carbon and 3% less butterfly range than when connectivity features were not included. Hence, the inclusion of connectivity into conservation planning can generate large increases in the protection of landscape connectivity with minimal loss of representation of other conservation targets.     

Whole-body vibration knowledge survey of U.S. occupational safety and health professionals

Problem

Whole-body vibration (WBV) is an occupational issue of concern due to adverse health effects or simple discomfort and annoyance. Unlike in Europe, WBV is an emerging topic in the U.S. safety and health (S&H) professional community. We hypothesized that at least one-half of the U.S. occupational S&H professionals knew little or nothing about WBV.

Method

We conducted a cross-sectional study (survey) of WBV knowledge among members of the American Society of Safety Engineers. A Likert scale (1-none to 5-expert) was used to determine WBV topic knowledge levels (KL_1-5).

Results

Analysis of 2,764 responses revealed that 69.5% of the participants self-reported a less than basic WBV understanding. The WBV KL_1-5 mean for all participants was 1.94 ± 1.00, corresponding to an awareness of WBV without a depth of understanding.

Summary

Many at-risk U.S. workers may not be supported by occupational S&H professionals with adequate WBV knowledge.

Impact on Industry

A significant number of U.S. workers may be exposed to unhealthy levels of whole-body vibration. However, the U.S. occupational safety and health community is generally unprepared to anticipate, monitor, and control the whole-body vibration hazard.     

Effect of quasi-static prestrain on the formability of dual phase steels in electrohydraulic forming

Dual phase steels derive their name from their microstructure, which consists of islands of martensite surrounded by a ferrite matrix. These steels are increasingly being used in automobile structures in order to reduce weight, improve fuel economy, and maintain crash safety performance. The higher strength grades of dual phase steels, such as DP780 and DP980, often present significant formability challenges in sheet stamping operations, and therefore any technologies which could alleviate these issues would be of significant value to the automotive industry. Electrohydraulic forming (EHF) is based upon the electro-hydraulic effect: a complex phenomenon related to the discharge of high voltage electrical current through a liquid. In EHF, electrical energy is stored in a bank of capacitors and is converted into the kinetic energy needed to form sheet metal by rapidly discharging that energy across a pair of electrodes submerged in a fluid. During such a discharge, a high pressure, high temperature plasma channel is created between the tips of the electrodes. The resulting shockwave in the liquid, initiated by the expansion of the plasma channel, is propagated toward the blank at the acoustic velocity of the fluid, and the mass and momentum of the water in the shock wave accelerates the sheet metal blank toward the die. The objective of this paper is to report the results of formability testing of dual phase steels under three basic conditions: (1) conventional limiting dome height (LDH) testing; (2) starting with a flat blank and using one pulse of EHF to fill the desired die geometry; and (3) starting with a quasi-static preforming step to partially fill the die cavity and then using one pulse of EHF to fill the remaining area of the die cavity. A hybrid process which combines sheet hydroforming (HF) and EHF as described herein has the potential to reduce the cycle time of the EHF process by replacing the initial EHF forming increments with one quasi-static preforming step. Additionally, a numerical model was developed and employed in order to better understand the sheet deformation process within EHF. The numerical model consists of four distinct models that are integrated into one: (1) an electrical model of the discharge channel, (2) a model of the plasma, (3) a model of the liquid as a pressure-transmitting medium, and (4) a deformable sheet metal blank in contact with a rigid die. Significant improvements in formability were confirmed experimentally for DP780 and DP980 by forming into conical and v-shape dies using EHF from a flat sheet and by using EHF combined with a quasi-static preforming step. Numerical modeling showed that the peak strain rates occurring in both single-pulse EHF the hybrid HF-EHF process are approximately 17,000 units per second.     

Prerequisites for learning from accident investigations – A cross-country comparison of national accident investigation boards

In this paper railway accident investigation reports issued by the national accident investigation boards in three Scandinavian countries during a 2-year period have been systematically studied. Content analysis of attributed causes in these reports reveals a considerable emphasis on physical processes, actor activities and equipment (the microlevel). Much less attention is paid to organisational factors (the mesolevel) and conditions related to regulators, associations and government (the macrolevel). This means that lessons will primarily be learned about aspects at the lower of these levels. Interviews show that the factors emphasised in investigation reports typically reflect the competences and experiences of the investigators, i.e. they are inclined to focus on areas of their own expertise. Since failures at the microlevel in many cases merely are symptoms of trouble at higher levels, it is argued that competence among investigators that supplements entirely technical or operational backgrounds are necessary for enabling deeper understanding of the factors leading to accidents. One possible way for achieving this is the creation of multi-modal investigation boards that provide a number of potential advantages, such as increased access to specialist competences that are shared between different sectors. Although a multi-modal approach to some degree has been adopted in all three countries, interviews reveal that these positive effects do not emerge automatically. It can therefore be concluded that multi-modal investigation boards offer a number of possible advantages, but only when these synergies are fully exploited can they provide a potential for more effective learning from accidents.     

流域的可持续管理:国际多个流域的案例研究

全球淡水资源正在不断受到污染和亏耗,威胁着可持续发展及人类和生态系统的健康.本文通过美国、日本、瑞士和巴西四个不同流域的案例研究,阐述了与淡水资源密切相关的可持续发展中的缺陷,指明了水资源可持续管理的总体方向.由于近几十年来人口的增长和经济的发展,每个流域的水质、流量和生物资源量都在下降.但是对于不同的流域来说,与水有关的这些问题的严重程度和文化观念大不相同,因而形成各自独特的水资源管理政策.在工业化国家,例如美国、瑞士和日本,这类政策允许采用资金密集型和能源密集型技术,使得这些国家在满足其水资源需求的同时还能尽量降低人类健康风险.然而,从可持续发展的观点看,以有限的自然资源为基础制定的这类政策,并非长久之计.对于新兴工业化国家(如巴西)来说,昂贵的水资源管理技术在经济上常常行不通,因而限制了新兴工业化国家和发展中国家对发达国家提供的技术的利用程度.要实现水资源的可持续管理,发达国家、新兴工业化国家和发展中国家都需要经历一个学习的过程,同时还需要遵循本文介绍的可持续发展的通用原则.     

Emission inventory on company level: lessons from Russia

Developing a transparent,accurate greenhouse gas (GHG) emissionsinventory is the first step toward buildingan effective GHG management system. Todate, GHG inventories have been conductedprimarily at national levels. Theinternationally accepted inventorymethodology developed by theIntergovernmental Panel on Climate Change(IPCC) is oriented to countrywideinventories. The electricity company RAOUESR is the largest single corporateemitter of GHG in the Russian Federation. The company is responsible for about 1/3 ofRussia's CO₂ emissions; RAO's fossil fuelemissions are comparable to the fossil fuelemissions of the United Kingdom. The GHGinventory prepared by RAO is the first suchcorporate emissions inventory undertaken ina non-OECD country. In this article wepresent a detailed independent examinationof the methodology RAO applied for theinventory. We identify the most importantsources of uncertainty and we estimate theuncertainty. The main conclusion of theindependent review is that the methodologyutilized by RAO and the informationsupporting the methodology are reliable andpresent a reasonably accurate company-widepicture of RAO's CO₂ emissions. The shareof other greenhouse gases is negligiblysmall and we did not focus on this fractionof RAO's GHG emissions. As a next step, RAOmay wish to conduct more precisefacility-by-facility inventories in orderto create a robust GHG emission managementsystem.     

The role of regulatory fit in visionary leadership

It is generally argued that leader visions motivate followers by focusing on reaching desirable end‐states. However, it has also been suggested that visions may motivate followers by focusing on avoiding undesirable situations. In this paper we investigate the effects of appeals that focus on preventing an undesirable situation (i.e., prevention‐appeals) as well as appeals that focus on promoting a desirable situation (i.e., promotion‐appeals). We argue that the effectiveness of promotion‐ and prevention‐appeals is contingent on follower regulatory focus. In two experiments we show that prevention‐appeals lead to better performance than promotion‐appeals for more prevention‐focused followers, while the reverse is true for more promotion‐focused followers. We find this pattern for a dispositional measure of follower regulatory focus (Study 1) as well as for a manipulation of follower regulatory focus (Study 2). Copyright © 2009 John Wiley & Sons, Ltd.