Developmental exposure to diuron causes splenotoxicity in male Sprague-Dawley rat pups

This study investigated whether perinatal exposure to diuron [3-(3,4-dichlorophenyl)-1-1-dimethylurea] might exert adverse effects on rat lymphoid organs. Pregnant Sprague-Dawley (SD) rats were exposed to diuron at 500, 750 or 1250 ppm in the diet from gestational days (GD) 12–21 and during lactation. At postnatal day (PND) 42, male pups were euthanized and thymus, spleen, mesenteric lymph node and femur were collected for histopathological analysis. Food consumption and body weight gain were significantly reduced in dams exposed to 1250 ppm during gestation period. Also, Diuron at 750 and 1250 ppm produced: (1) increased relative spleen weight associated histologically with severe congestion in red pulp, (2) enhanced extramedullary hematopoiesis and hemosiderosis as well as (3) depletion of lymphoid follicles in white pulp. Flow cytometric analysis revealed a significant reduction in B lymphocytes (CD45RA+) in male pups but T lymphocytes (CD4+, CD8+ and CD4+/CD8+) were not markedly affected. Thus, data suggest that Diuron-induced maternal toxicity in dams exposed to high dose and perinatal exposure to this herbicide produced spleen toxicity as evidenced by a reduction in B lymphocyte number in male SD pups.     

Kinetic Behavior in Melt State and Solid State Polymerization of Lactide Using Magnesium Stearate as Catalyst

Solid state polymerizations (SSP) and the kinetic behavior in melt state of l-lactide polymerizations employing magnesium stearate as catalyst were investigated. The solid state polymerizations were carried out in two steps where pre-polymers were first prepared in melt polymerizations at 180 °C and the subsequent post-polymerizations were performed around the Tc of polylactide (PLA). In order to find the initial SSP conditions, kinetic profiles of melt polymerizations of l-lactide with magnesium stearate were determined. According to the kinetics data the melt polymerizations were found to be first order with respect to lactide as evident from a linear relationship of logarithmic variations of l-lactide concentration versus time using catalyst/monomer ratios of 1:500 and 1:5,000. When the catalyst content is increased to 1:100 the relationship loses its linearity due to fast propagation in the early stages of the reaction. From the GPC data it can be noted that the molecular weight of PLA can be increased by 5–17 times under the conditions established for our SSP experiments. A comparison between the two step solid state polymerizations and already reported melt polymerizations using the same catalyst showed that SSP furnished polymers with much lower amount of polymer degradation.     

Calibration and validation of an integrated nitrate transport model within a well capture zone

Groundwater contamination by nitrate was investigated in an agricultural area in southern Quebec, Canada, where a municipal well is the local source of drinking water. A network of 38 piezometers was installed within the capture zone of the municipal well to monitor water table levels and nitrate concentrations in the aquifer. Nitrate concentrations were also measured in the municipal well. A Water flow and Nitrate transport Global Model (WNGM) was developed to simulate the impact of agricultural activities on nitrate concentrations in both the aquifer and municipal well. The WNGM first uses the Agriflux model to simulate vertical water and nitrate fluxes below the root zone for each of the seventy agricultural fields located within the capture zone of the municipal well. The WNGM then uses the HydroGeoSphere model to simulate three-dimensional variably-saturated groundwater flow and nitrate transport in the aquifer using water and nitrate fluxes computed with the Agriflux model as the top boundary conditions. The WNGM model was calibrated by reproducing water levels measured from 2005 to 2007 in the network of piezometers and nitrate concentrations measured in the municipal well from 1997 to 2007. The nitrate concentrations measured in the network of piezometers, however, showed greater variability than in the municipal well and could not be reproduced by the calibrated model. After calibration, the model was validated by successfully reproducing the decrease of nitrate concentrations observed in the municipal well in 2006 and 2007. Although it cannot predict nitrate concentrations in individual piezometers, the calibrated and validated WNGM can be used to assess the impact of changes in agricultural practices on global nitrate concentrations in the aquifer and in the municipal well.     

Kinetic analysis of constructed systems for the recovery of contaminated areas by acid mine drainage

INTRODUCTION: Flowing of the acid mine drainage may contaminate the adjacent water bodies causing substantial changes in the aquatic ecosystem. This aspect is the most relevant problem in the southern of Santa Catarina once the contaminated areas are inserted in the watershed of the Araranguá, Urussanga, and Tubar?o rivers, increasing the need for recovery studies. These areas are between Criciúma, I?ara, Urussanga, Siderópolis, Lauro Müller, Orleans, and Alfredo Wagner towns where a conservation unit exist called the Environmental Preservation Area of Baleia Franca. Aiming to compare the kinetics of the ash derived from burning coal and to neutralize acid mine drainage, different neutralizer, limestone, fly, and bottom ash, was mounted on a pilot scale experiment. DISCUSSION: The transport parameters showed the same order of infiltration and dispersion: fly ash < bottom ash < limestone. The order of measured alkalinity was: limestone < fly ash < bottom ash, with pH values of 9.34, 12.07, and 12.25, respectively. The limestone kinetics of acidic drainage neutralization was first order with reaction rate constant k?=?0.0963 min(-1), bottom ash was 3/4 with k?=?0.0723 mol(1/4) L(-1/4) min(-1), and the fly ash had higher order kinetics, 4/3, with reaction rate constant k?=?27.122 L(1/3) mol(-1/3) min(-1). However, by mathematical modeling, it was found that due to a combination of transport and kinetics, only limestone treatment reached a pH above 6 within 5 years, corresponding to the ideal as planned.     

Monitoring of heavy metal concentrations in home outdoor air using moss bags

One monitoring station is insufficient to characterize the high spatial variation of traffic-related heavy metals within cities. We tested moss bags (Hylocomium splendens), deployed in a dense network, for the monitoring of metals in outdoor air and characterized metals’ long-term spatial distribution and its determinants in Girona, Spain. Mosses were exposed outside 23 homes for two months; NO₂ was monitored for comparison. Metals were not highly correlated with NO₂ and showed higher spatial variation than NO₂. Regression models explained 61-85% of Cu, Cr, Mo, Pb, Sb, Sn, and Zn and 72% of NO₂ variability. Metals were strongly associated with the number of bus lines in the nearest street. Heavy metals are an alternative traffic-marker to NO₂ given their toxicological relevance, stronger association with local traffic and higher spatial variability. Monitoring heavy metals with mosses is appealing, particularly for long-term exposure assessment, as mosses can remain on site many months without maintenance.     

Is BDE-175 an important enough component of commercial octabromodiphenyl ether mixtures to be listed in Annex A of the Stockholm Convention?

Commercial octabromodiphenyl ether mixtures, containing hexabromodiphenyl ethers and heptabromodiphenyl ethers were listed in Annex A of the Stockholm Convention on May 2009 (Fourth Conference of the Parties) (UNEP, 2009a). Four compounds are specifically mentioned: 2,2′,4,4′,5,5′-hexabromodiphenyl ether (BDE-153), 2,2′,4,4′,5,6′-hexabromodiphenyl ether (BDE-154), 2,2′,3,3′,4,5′,6-heptabromodiphenyl ether (BDE-175), and 2,2′,3,4,4′,5′,6-heptabromodiphenyl ether (BDE-183). Presumably they were identified as key components of commercial mixtures and found to be present in environmental samples. However, since BDE-175 and BDE-183 co-elute on common HRGC columns, the presence of BDE-175 as an important component in technical octa-BDE mixtures has not been illustrated. The successful HRGC/LRMS separation of a 1:1 mixture of BDE-175 and BDE-183, as well as ¹H NMR analysis of technical material, has allowed us to confirm that this congener is not present in technical products (e.g. Great Lakes DE-79™) in quantifiable amounts.     

Estimation of residual MSW heating value as a function of waste component recycling

Recycling of packaging wastes may be compatible with incineration within integrated waste management systems. To study this, a mathematical model is presented to calculate the fraction composition of residual municipal solid waste (MSW) only as a function of the MSW fraction composition at source and recycling fractions of the different waste materials. The application of the model to the Lisbon region yielded results showing that the residual waste fraction composition depends both on the packaging wastes fraction at source and on the ratio between that fraction and the fraction of the same material, packaging and non-packaging, at source. This behaviour determines the variation of the residual waste LHV. For 100% of paper packaging recycling, LHV reduces 4.2% whereas this reduction is of 14.4% for 100% of packaging plastics recycling. For 100% of food waste recovery, LHV increases 36.8% due to the moisture fraction reduction of the residual waste. Additionally the results evidence that the negative impact of recycling paper and plastic packaging on the LHV may be compensated by recycling food waste and glass and metal packaging. This makes packaging materials recycling and food waste recovery compatible strategies with incineration within integrated waste management systems.     

Evaluation of genotoxicity and toxicity of water and sediment samples from a Brazilian stream influenced by tannery industries

This paper reports results of genotoxicity and toxicity studies of water and sediment samples collected from the Estancia Velha stream of southern Brazil, a stream transporting both domestic sewage and effluents from regional factories working in the leather industry. Three sites were selected: in the stream headwaters (Site 1), located downstream of an urban area (Site 2), and near the basin outfall (Site 3). Results obtained with Allium cepa showed no evidence of chromosomal mutation, either in water or in sediment, during winter or summer seasons, but samples collected below Site 1 showed high toxicity. Physical and chemical analyses showed high concentrations of pollutants at these sites. Ecotoxicity tests with Daphnia magna and Ceriodaphnia dubia measured toxicity in water from Sites 2 and 3 in summer 2004. A toxic effect on Hyalella azteca was only found in sediment from Site 3 during winter 2003 and summer 2004. The results suggest that the synergy among different compounds in domestic and industrial sewage discharges can make it difficult to maintain system stability.     

Cephalopods and cetaceans as indicators of offshore bioavailability of cadmium off Central South Brazil Bight

Regarding Brazilian coast, industrial and urban developments are concentrated along Central South Brazil Bight. Samples from inshore and offshore species from the concerned area were analyzed, comprising 24 cetaceans (9 species) and 32 squids (2 species). Cadmium was determined by GFAAS and our results were in agreement with certified values (DOLT-2, NRCC). Mean cadmium concentration (in microg/g, wet weight) observed in the digestive gland of sexually mature Argentine short-finned squids (Illex argentinus) was 1002.9. To our knowledge this is the highest cadmium level ever reported for a cephalopod. Concerning cetaceans, our results include one of the highest renal cadmium concentrations described for striped dolphins (71.29 microg/g, wet weight). Anthropogenic action, upwelling and cannibalism of Argentine short-finned squid on the studied area are possible reasons for such remarkable cadmium concentrations.