Control targets for the management of biological systems

Attention is focused on biological systems which are describable in terms of ordinary differential equations subject to human control inputs. The concept of an isochronal system is introduced in order to include systems for which the differential equations are valid only over regularly reoccurring time intervals.It is assumed that the control inputs are to be chosen so that an integral cost function of the state of the system, the control used, current time, and the time interval of the control program is minimized. Problems associated with minimizing this cost function over an infinitely long time interval is then considered. Difficulties inherent with minimizing a cost integral on an infinite time interval are shown to be avoided by minimizing an average of the cost function over an unknown but periodic time interval. Under proper circumstance, the optimal control program for the average cost function is either identical to or a good approximation to the optimal control program for the original cost function over an infinitely long time interval.Necessary conditions are obtained for minimizing an average cost function over an unspecified time interval subject to the system equations. For a given problem the necessary conditions will yield but a single system trajectory in the state space. For management purposes this trajectory may be thought of as a target to which the system should be driven and maintained.A number of examples illustrate the use of the necessary conditions to obtain control targets. Certain problems associated with the stability of the target solutions are illustrated with the examples.     

Modified pheromone communication associated with insecticidal resistance in the obliquebanded leafroller, Choristoneura rosaceana (Lepidoptera: Tortricidae)

Summary. This study reports on the impact of insecticidal resistance on the diel periodicity of the calling behaviour and pheromone production of different-aged virgin females of the obliquebanded leafroller (OBL), Choristoneura rosaceana. While both resistant (R) and susceptible (S) females initiated calling on the first night following emergence, the periodicity of the calling behaviour, as determined by the mean onset time of calling (MOTC) and the mean time spent calling (MTSC) over the first six nights of calling, differed between the two strains. R females started calling significantly later in the night. However, as the MOTC of R females advanced with age but did not do so in S individuals, the difference between strains was more pronounced in younger than older females. Furthermore, R females spent less time calling than S individuals. However, the MTSC increased as a function of age in both R and S females, so the difference between strains remained fairly constant for each night of calling. The major component of OBL sex pheromone, the Z11-14: Ac, determined at peak calling activity, significantly declined with female age. Overall, pheromone production was lower in R females than in S females, with the difference being more pronounced in younger than in older individuals. Thus, resistant females may have a lower mating success. The mating success of both R and S strain males did not vary with the number of previous matings acquired. With regard to males, although there was a significant decline in spermatophore size with successive matings, there was no significant difference between strains. However, R males are smaller and may be disadvantaged through female choice and/or may respond differently to pheromone source compared with S individuals. If the reproductive success of both sexes is affected, this may have a profound influence on the dynamics of insecticidal resistance in the presence or absence of selection in OBL populations. Received 4 July 2001; accepted 19 October 2001.     

Linking intra-seasonal variations in climate and tree-ring δC: A functional modelling approach

Stable carbon isotopic composition (δ¹³C) in tree rings is a widely recognized tool for climate reconstruction, and several works suggest that seasonal information can be extracted from intra-ring δ¹³C variations. In this study, we explored the link between climate and intra-seasonal oak ring δ¹³C using a process-based modelling approach. The ISOCASTANEA model was developed to compute the seasonal dynamics of tree-ring δ¹³C for deciduous species from half-hourly climatic data by accounting for photosynthetic discrimination and carbon translocation and allocation at the tree scale and in tree rings.The model was applied from March 2005 to December 2007 in a 150-year-old deciduous oak forest. Canopy photosynthesis and stomatal conductance were calibrated using H₂O and CO₂ fluxes measured by the eddy flux technique, and simulated δ¹³C values were compared to seasonal patterns of total organic matter δ¹³C measured in tree rings for 2006 and 2007 at the same site. With the inclusion of carbon translocation and with regard to ¹³C enrichment of starch compared to soluble sugars, the model can reasonably simulate the intra-seasonal and inter-annual variability of tree-ring δ¹³C using the same parameter values for 2006 and 2007. The amplitude of the seasonal carbon isotope pattern in tree rings was influenced by both photosynthetic and post-photosynthetic processes (starch enrichment and reserve use). The δ¹³C variations in the early part of the ring, i.e., mainly in the earlywood, were related mostly to carbohydrate metabolism, although diluted information about environmental conditions during the previous year could also be found. The last part of the ring, consisting mainly of latewood, was found to be a good recorder of current-year environmental conditions, in particular relative humidity, at a fine temporal resolution when the growth rate was high. The sensitivity of the δ¹³C in the early part of the ring to carbohydrate metabolism suggests that intra-ring δ¹³C could be used to explore the relationship between tree decline or mortality and carbohydrate deficiency.     

Using home range estimates to construct social networks for species with indirect behavioral interactions

Social network analysis has become a vital tool for studying patterns of individual interactions that influence a variety of processes in behavior, ecology, and evolution. Taxa in which interactions are indirect or whose social behaviors are difficult to observe directly are being excluded from this rapidly expanding field. Here, we introduce a method that uses a probabilistic and spatially implicit technique for delineating social interactions. Kernel density estimators (KDE) are nonparametric techniques that are often used in home range analyses and allow researchers studying social networks to generate interaction matrices based on shared space use. We explored the use of KDE analysis and the effects of altering KDE input parameters on social network metrics using data from a natural population of the spatially persistent forked fungus beetle, Bolitotherus cornutus.     

Elemental carbon and sulfate aerosols over a rural mountain site in the northeastern United States: Regional emissions and implications for climate change

The effect of elemental carbon (EC) on global as well as regional climate forcing is potentially very important. However, the EC data for northeastern U.S. is sparse. Daily EC concentrations, [EC], and [SO₄] were measured in the northeastern U.S. at a regionally representative rural site, Whiteface Mountain (WFM; 44.366°N, 73.903°W, 1.5 km amsl, above mean sea level), New York (NY), for 1997. The air mass origin was determined using 6-h backward in time air trajectories obtained from the Hybrid Single-Particle Lagrangian Integrated Trajectory Model (HYSPLIT 4). [EC] and [SO₄] were highly variable and influenced by synoptic–scale meteorology (rainy vs dry periods). The maximum daily [EC] and [SO₄] were 364 ± 55 and 28,800 ± 3000 ng m^?3, respectively. [EC] and [SO₄] also showed seasonal variations at WFM. Occurrences of high daily [EC] were mainly in spring months, while peak daily [SO₄] concentrations occurred in summer months. This behavior of aerosols is due to the fact that the sources of EC and SO₄ are not the same and also due to the enhanced photochemical activity during summer months that increased the production of SO₄ from SO₂. High [EC] and [SO₄] values were associated with westerly air flow from the industrialized Midwestern U.S. Sector analysis using HYSPLIT 4 air trajectories showed that regions lying between the southwest and northwest of the WFM contributed 81% and 83% of the [EC] and [SO₄], respectively. The monthly net direct radiative forcing for shortwave (SW) due to EC and SO₄ aerosols at the top of the atmosphere (TOA) varied from ?0.05 to ?0.50 W m^?2, with an annual average of ?0.20 ± 0.15 W m^?2 that gives a net cooling effect. Average net radiative forcing at WFM for clear sky is lower than the global average radiative forcing reported by IPCC (Foster and Ramaswamy, 2007).     

Life cycle assessment of spray dried soluble coffee and comparison with alternatives (drip filter and capsule espresso)

This paper aims to evaluate the environmental burdens associated with spray dried soluble coffee over its entire life cycle and compare it with drip filter coffee and capsule espresso coffee. It particularly aims to identify critical environmental issues and responsibilities along the whole life cycle chain of spray dried coffee. This life cycle assessment (LCA) specifically uses foreground data obtained directly from coffee manufacturers and suppliers. Aside from energy consumption and greenhouse gases emissions, water footprint is also studied in detail, including regionalization of water impacts based on the ecological scarcity method 2006. Other impact categories are screened using the IMPACT 2002+ impact assessment method.The overall LCA results for a 1 dl cup of spray dried soluble coffee amounts approximately to 1 MJ of primary non-renewable energy consumption, to emissions of 0.07 kg of CO_2-eq, and between 3 and 10 l of non-turbined water use, depending on whether or not the coffee cultivation is irrigated and wet treated. When considering turbined water, use can be up to 400 l of water per cup. Pouch – and to a lesser extent metal can packaging alternatives – show lower environmental burdens than glass or sticks.On average, about one half of the environmental footprint occurs at a life cycle stage under the control of the coffee producer or its suppliers (i.e., during cultivation, treatment, processing, packaging up to distribution, along with advertising) and the other half at a stage controlled by the user (shopping, appliances manufacturing, use and waste disposal). Key environmental parameters of spray dried soluble coffee are the amount of extra water boiled and the efficiency of cup cleaning during use phase, whether the coffee is irrigated or not, as well as the type and amount of fertilizer used in the coffee field. The packaging contributes to 10% of the overall life cycle impacts.Compared to other coffee alternatives, spray dried soluble coffee uses less energy and has a lower environmental footprint than capsule espresso coffee or drip filter coffee, the latter having the highest environmental impacts on a per cup basis. This study shows that a broad LCA approach is needed to help industry to minimize the environmental burdens directly related to their products. Including all processes of the entire system is necessary i) to get a comprehensive environmental footprint of the product system with respect to sustainable production and consumption, ii) to share stakeholders responsibility along the entire product life cycle, and iii) to avoid problem shifting between different life cycle stages.     

Social and behavioral research on risk: Uses in risk management decisionmaking

The overall objective of this paper is to describe the principle uses of social and behavioral research in risk management decisionmaking. Five such uses are identified and discussed, including uses in (1) identifying the nature and extent of public concern; (2) structuring public debate and resolving conflicts; (3) anticipating public responses to new technologies; (4) conducting and informing the public; and (5) designing and implementing risk management policies and systems.     

Fluorescence Verses Radioactivity Labeling for Lab-Scale Investigation of the Fate of Water-Soluble Polymers in Wastewater Treatment Plants

Water-soluble synthetic polymers are extensively used in cosmetics, detergents and paints. Many end up in wastewater and, later on, in wastewater-treatment plants. In order to gain an insight into their fate in such plants, fluorescence and radioactivity labelings were compared using a lab-scale reactor designed to mimic industrial conditions. Two fermentation media were considered, namely a mixture of E402 and E204 micro-organisms and an activated sludge collected from a water-treatment plant located in the south of France. A sample of low molar mass commercial poly(acrylic acid) (PAA) was labeled by radioactivity with tritium and by coupling the 6-aminofluorescein fluorescent dye. Labeled PAA-containing sludges were allowed to ferment. To monitor the fate of the polymers, aliquots of the fermented mixtures were withdrawn at selected times and centrifuged. Liquid and solid phases were analyzed by scintigraphy or UV spectrometry, depending of the labeling techniques. Both techniques led to similar distributions, c.a. 75% in the supernatant and 25% in the solid phase. Distributions remained constant during the biological tests. There was no degradation of the commercial PAA after aqueous size exclusion chromatography (SEC), in agreement with literature. These features showed that fluorescence-labeling can be used instead of the complex and expensive radiolabeling. The validated fluorescence-based method was then applied to a linear poly(acrylic acid) synthesized by ATRP and labeled with 6-aminofluorescein. There was no significant difference between the commercial and the linear poly(acrylic acid)s. In contrast, a linear PAA with 5% of tert-butyl ester repeating units was predominantly found in the solid phase although adsorption or absorption by micro-organisms could not be demonstrated. The method based on fluorescence labeling should be applicable to other water soluble polymers provided that the dye remains attached to the polymer as it was the case for the studied poly(acrylic acid)s.     

Oxidation of SO2 in Clouds at Whiteface Mountain

In-cloud oxidation of SO₂ byH₂O₂ was investigated using a tracertechnique based on SO^2– ₄/Se ratios atWhiteface Mountain, New York during summer months from1990 to 1998. Cloud water samples collected at themountain's summit (1.5 km above mean sea level) andaerosols at a below cloud site (Lodge) located at 0.6km amsl and in cloud interstitial air at the summitwere analyzed for SO^2– ₄ and selectedtrace elements. Gaseous SO₂ andH₂O₂were measured in realtime. Cloud water pH wasgenerally below 5.0 with a mean value of 3.6. Theresults show that significant in cloud oxidation occursin clouds during summer months varying from belowdetection to 62% with on average approximately 24% ofthe cloud water SO^2– ₄ produced from in-situ SO₂ oxidation. During summer the clouds wereoxidant limited for approximately one third of thetime.