Alarming decline of freshwater trigger species in western Mediterranean key biodiversity areas

Theidentification of key biodiversity areas (KBA) was initiated by the International Union for Conservation of Nature in 2004 to overcome taxonomic biases in the selection of important areas for conservation, including freshwater ecosystems. Since then, several KBAs have been identified mainly based on the presence of trigger species (i.e., species that trigger either the vulnerability and or the irreplaceability criterion and thus identify a site as a KBA). However, to our knowledge, many of these KBAs have not been validated. Therefore, classical surveys of the taxa used to identify freshwater KBAs (fishes, molluscs, odonates, and aquatic plants) were conducted in Douro (Iberian Peninsula) and Sebou (Morocco) River basins in the Mediterranean Biodiversity Hotspot. Environmental DNA analyses were undertaken in the Moroccan KBAs. There was a mismatch between the supposed and actual presence of trigger species. None of the trigger species were found in 43% and 50% of all KBAs surveyed in the Douro and Sebou basins, respectively. Shortcomings of freshwater KBA identification relate to flawed or lack of distribution data for trigger species. This situation results from a misleading initial identification of KBAs based on poor (or even inaccurate) ecological information or due to increased human disturbance between initial KBA identification and the present. To improve identification of future freshwater KBAs, we suggest selecting trigger species with a more conservative approach; use of local expert knowledge and digital data (to assess habitat quality, species distribution, and potential threats); consideration of the subcatchment when delineating KBAs boundaries; thoughtful consideration of terrestrial special areas for conservation limits; and periodic field validation.     

Nutritional geometry and macronutrient variation in the diets of gannets: the challenges in marine field studies

Foraging theory proposes that the nutritional driver of food choice and foraging in carnivores is energy gain. In contrast, recent laboratory experiments have shown that several species of carnivore select prey that provides a diet with a specific balance of macronutrients, rather than the highest energy content. It remains, however, to be determined how nutritionally variable the foods of predators in the wild are, and whether they feed selectively from available prey to balance their diet. Here, we used a geometric method named the right-angled mixture triangle (RMT) for examining nutritional variability in the prey and selected diets of a group of wild carnivores and marine top predators, the gannets (Morus spp.). A prey-level diet analysis was performed on Australasian gannets (M. serrator) from two New Zealand locations, and the macronutrient composition of their chosen prey species was measured. We use RMT to extend the comparison in the compositions of foods and diets from Australasian gannets from Australia as well as Northern gannets (M. bassanus) and Cape gannets (M. capensis). We found nutritional variability at multiple scales: intra- and interspecific variability in the pelagic fish and squid prey themselves; and intra- and interspecific variability in the diets consumed by geographically disparate populations of gannets. This nutritional variability potentially presents these predatory seabirds with both opportunity to select an optimal diet, and constraint if prevented from securing an optimal diet.     

Kelvin–Helmholtz instability in the presence of variable viscosity for mudflow resuspension in estuaries

The temporal stability of a parallel shear flow of miscible fluid layers of different density and viscosity is investigated through a linear stability analysis and direct numerical simulations. The geometry and rheology of this Newtonian fluid mixing can be viewed as a simplified model of the behavior of mudflow at the bottom of estuaries for suspension studies. In this study, focus is on the stability and transition to turbulence of an initially laminar configuration. A parametric analysis is performed by varying the values of three control parameters, namely the viscosity ratio, the Richardson and Reynolds numbers, in the case of initially identical thickness of the velocity, density and viscosity profiles. The range of parameters has been chosen so as to mimic a wide variety of real configurations. This study shows that the Kelvin–Helmholtz instability is controlled by the local Reynolds and Richardson numbers of the inflection point. In addition, at moderate Reynolds number, viscosity stratification has a strong influence on the onset of instability, the latter being enhanced at high viscosity ratio, while at high Reynolds number, the influence is less pronounced. In all cases, we show that the thickness of the mixing layer (and thus resuspension) is increased by high viscosity stratification, in particular during the non-linear development of the instability and especially pairing processes. This study suggests that mud viscosity has to be taken into account for resuspension parameterizations because of its impact on the inflection point Reynolds number and the viscosity ratio, which are key parameters for shear instabilities.     

Changes in polybrominated diphenyl ether (PBDE) levels in cooked food

Food surveys for levels of toxic chemicals frequently report the levels on an uncooked basis. It is known that cooking may in some conditions decrease the amount of dioxins and related chemicals in food. Surveys of polybrominated diphenyl ether (PBDE) levels in food to date show data from uncooked food only. In this article, it was shown that broiling, with fat dripped from the foods reported here, ground beef, ground lamb, catfish, trout, and salmon, reduces the amount of PBDEs in these foods. This suggests that calculations of food intake need to take into consideration levels in the cooked food rather than in the uncooked food.     

Biochemical composition of a meso-bathyal lobster

To characterise some traits of the life strategies of Polycheles typhlops, a deep-sea small lobster usually encountered as by-catch within deep trawls in the Southern Tyrrhenian Sea (Mediterranean Sea), we analysed the biochemical composition of the caudal muscles of 49 specimens collected in March and April 2007. Differences in the biochemical composition between females and males were weak, but relevant differences in protein (>90% of the organic C) and lipid (4–6%) contents were observed between developmental stages both in females and males. These differences are likely to be related to different food items and/or to the metabolic shifts associated with their reproduction. We argue that this deep-sea lobster could cover a relevant role in the meso-pelagic food webs and attract future commercial interest.     

Behaviour of Dioxins,Furans and Metals Associated with Stabilized Msw Combustor Ash in Sea Water

This report presents the results of a research programme designed to examine the engineering and environmental acceptability of stabilizing municipal solid waste (MSW) combustor ash for artificial reef construction. Municipal solid waste combustor ash was combined with Portland cement to form solid blocks using conventional construction block making technology. the resultant stabilized combustor ash (SCA) blocks were used to construct an artificial habitat in Conscience Bay, Long Island Sound, New York and compared to identical concrete blocks, fabricated using natural aggregates. Over a 4.5 year period divers periodically returned to the site to monitor the interaction of SCA blocks with the marine environment and compare the performance of these blocks with the concrete control blocks. Results show that the SCA blocks retain their strength after prolonged sea water exposure. Contaminants of environmental concern, including metals, dioxins and furans, were retained within the cementitious matrix of the SCA blocks after prolonged sea water submersion. in addition, organisms growing on the surfaces of the SCA blocks did not accumulate contaminants from the blocks.     

A two-dimensional inviscid model of the gravity-current head by Lagrangian block simulation

A two-dimensional inviscid model of the gravity-current head produced by the release of a relatively small volume of dense fluid from behind a tall lock gate is constructed by Lagrangian block simulation. Three numerical experiments are conducted for the lock’s height-to-length aspect ratios H/L _o  = 8, 4 and 2. The front speeds obtained by the simulations agree with the laboratory observation for a similar range of aspect ratios. The floor velocity in the wake behind these heads is found to be greater than their front speed. The high floor velocity is caused by the impingement of the coherent wake vortex on the floor. It is a condition that permits these gravity-current heads to maintain their structural integrity so that the fine sediments can travel with the head over long distances on the ocean floor. The structural coherence of the current head depends on the lock aspect ratio. The gravity-current head produced by the release from the lock with the highest aspect ratio of H/L _o  = 8 is most coherent and relatively has the greatest floor velocity and the least trailing current behind the head.     

Performance of amine-multilayered solid sorbents for CO2 removal: Effect of fabrication variables

The emission of fossil fuel carbon dioxide (CO₂) to the atmosphere is implicated as the predominant cause of global climate change; therefore, advanced CO₂ capture technologies are of the utmost importance. In this study, innovative amine-multilayered sorbents were fabricated using layer-by-layer (LbL) nanoassembly technology via alternate deposition of a CO₂-adsorbing amine polymer (e.g. polyethylenimine or PEI) and an oppositely-charged polymer (e.g. polystyrene sulfonate or PSS). We found that the developed sorbents could be used for CO₂ capture and that LbL nanoassembly allows us to engineer their CO₂ capture performance through the fabrication variables (e.g. deposition polymers, deposition media, and number of bilayers). PEI/PSS was found to be the best polymer combination for developing sorbents with relatively high CO₂ capture capacity. The amine-multilayered solid sorbents possessed fine microstructures and may have similar polymer deposition within and on the surface of solid sorbents. These amine-multilayered sorbents had much faster CO₂ desorption rates compared to sorbents prepared using the current PEI-impregnation approach. Such fast CO₂ desorption could make sorbents a good option for CO₂ removal from power plants and even the atmosphere.