Influence of RFID tags on recyclability of plastic packaging

The use of Radio Frequency IDentification Technology (RFID) in the packaging sector is an important logistical improvement regarding the advantages offered by this technology in comparison with barcodes. Nevertheless, the presence of these devices in plastic packaging, and consequently in plastic waste, can cause several problems in the recycling plants due to the materials included in these devices.In this study, the mentioned recycling constraints have been experimentally identified in a pilot scale recycling study consisting in three recycling tests with an increasing presence of RFID tags. Differences in each test were evaluated. Furthermore, the quality of the recycled material of each test was studied through the injection and testing of tests probes.The results of the pilot scale recycling tests did not show a decrease in the quality of the recycled plastic due to the presence of RFID tags. Nevertheless, several operational problems during the recycling process were observed such as the obstruction of the screens, which lessened the process yield and created process interruptions, as well as the loss of extruded plastic during the process.These recycling constraints cannot be directly extrapolated to the industrial plants due to the different working scales. Nevertheless, technological solutions are proposed in order to avoid these recycling constraints if they appear.     

Reducing the environmental impact of methane emissions from dairy farms by anaerobic digestion of cattle waste

Four dairy cattle farms considered representative of Northern Spain milk production were studied. Cattle waste was characterised and energy consumption in the farms was inventoried. Methane emissions due to slurry/manure management and fuel consumption on the farms were calculated. The possibility of applying anaerobic digestion to the slurry to minimise emissions and of using the biogas produced to replace fossil fuels on the farm was considered. Methane emissions due to slurry management (storage and use as fertiliser) ranged from 34 to 66 kg CH₄ cow⁻¹ year⁻¹ for dairy cows and from 13 to 25 kg CH₄ cow⁻¹ year⁻¹ for suckler calves. Cattle on these farms are housed for most of the year, and the contribution from emissions from manure dropped in pastures is insignificant due to the very low methane conversion factors. If anaerobic digestion were implemented on the farms, the potential GHG emissions savings per livestock unit would range from 978 to 1776 kg CO₂ eq year⁻¹, with the main savings due to avoided methane emissions during slurry management. The methane produced would be sufficient to supply digester heating needs (35-55% of the total methane produced) and on-farm fuel energy requirements.     

Deactivation and regeneration of ZSM-5 zeolite in catalytic pyrolysis of plastic wastes

In this work, a study of the regeneration and reuse of ZSM-5 zeolite in the pyrolysis of a plastic mixture has been carried out in a semi-batch reactor at 440 °C. The results have been compared with those obtained with fresh-catalyst and in non-catalytic experiments with the same conditions. The use of fresh catalyst produces a significant change in both the pyrolysis yields and the properties of the liquids and gases obtained. Gases more rich in C3-C4 and H₂ are produced, as well as lower quantities of aromatic liquids if compared with those obtained in thermal decomposition. The authors have proved that after one pyrolysis experiment the zeolite loses quite a lot of its activity, which is reflected in both the yields and the products quality; however, this deactivation was found to be reversible since after regeneration heating at 550 °C in oxygen atmosphere, this catalyst recovered its initial activity, generating similar products and in equivalent proportions as those obtained with fresh catalyst.     

Development of a fast instrumental method for the analysis of pharmaceuticals in environmental and wastewaters based on ultra high performance liquid chromatography (UHPLC)-tandem mass spectrometry (MS/MS)

This work describes the development, optimization and validation of an analytical method for the simultaneous detection and identification of 74 pharmaceutically active compounds (PhACs), from various therapeutic groups, in both environmental (ground and surface water) and wastewaters (WW). The method is based on the simultaneous extraction of all target compounds by solid phase extraction (SPE), using a hydrophilic-lipophilic balanced polymer followed by ultra high performance liquid chromatography (UHPLC) tandem mass spectrometry (MS/MS). Two selected reaction monitoring (SRM) transitions have been monitored per compound in order to fulfil the EC guidelines, as well as to ensure an accurate identification of target compounds in the samples. Quantification is performed by internal standard approach, applying 24 specific isotopically labeled compounds. The main advantages of the developed method, besides the selectivity and reliability of the results, is its high throughput. All compounds are extracted in a single step and the instrumental analysis lasts 5 min (NI mode) + 8 min (PI mode), allowing fast throughput of samples. The limits of detection range from 0.01 to 50 ng L⁻¹, depending on the matrix, for most of the compounds. Finally, the method developed has been applied to the analysis of pharmaceuticals in the Ebro river basin (NE Spain).     

Biofilm formation and microbial activity in a biofilter system in the presence of MTBE, ETBE and TAME

Emerging water contaminants derived from unleaded gasoline such as methyl tert-butyl ether (MTBE), ethyl tert-butyl ether (ETBE) and tert-amyl methyl ether (TAME), are in need of effective bioremediation technologies for restoring water resources. In order to design the conditions of a future groundwater bioremediating biofilter, this work assesses the potential use of Acinetobacter calcoaceticus M10, Rhodococcus ruber E10 and Gordonia amicalis T3 for the removal of MTBE, ETBE and TAME in consortia or as individual strains. Biofilm formation on an inert polyethylene support material was assessed with scanning electron microscopy, and consortia were also analysed with fluorescent in situ hybridisation to examine the relation between the strains. A. calcoaceticus M10 was the best coloniser, followed by G. amicalis T3, however, biofilm formation of pair consortia favoured consortium M10-E10 both in formation and activity. However, degradation batch studies determined that neither consortium exhibited higher degradation than individual strain degradation. The physiological state of the three strains was also determined through flow cytometry using propidium iodide and 3′-dihexylocarbocyanine iodide thus gathering information on their viability and activity with the three oxygenates since previous microbial counts revealed slow growth. Strain E10 was observed to have the highest physiological activity in the presence of MTBE, and strain M10 activity with TAME was only maintained for 24 h, thus we believe that biotransformation of MTBE occurs within the active periods established by the cytometry analyses. Viable cell counts and oxygenate removal were determined in the presence of the metabolites tert-butyl alcohol (TBA) and tert-amyl alcohol (TAA), resulting in TBA biotransformation by M10 and E10, and TAA by M10. Our results show that A. calcoaceticus M10 and the consortium M10-E10 could be adequate inocula in MTBE and TAME bioremediating technologies.     

Phosphorus effect on Zn adsorption-desorption kinetics in acid soils

The adsorption-desorption kinetics of Zn in the absence and presence of P was studied by using the stirred flow chamber technique. The results thus obtained were compared with those previously obtained for Cu. As with copper, the simultaneous addition of P and Zn in a 1:1 mole ratio to soil was found to significantly increased Zn adsorption relative to the absence of P. Unlike Cu, however, Zn was only adsorbed at fast adsorption sites in the absence of P. In any case, the increased adsorption of Zn in the presence of P was largely due to slow adsorption sites, where Zn²⁺ ion acted as a bridging element between P and organic matter. Following adsorption in both the presence and absence of P, Zn was desorbed to a much higher extent than was Cu. However, the proportion of Zn desorbed after adsorption in the presence of P was significantly lower than in the absence of P. This indicates that Zn binds more strongly to adsorbing surfaces in the presence of P than in its absence.     

Response of Holm oak (Quercus ilex subsp. ballota) and mastic shrub (Pistacia lentiscus L.) seedlings to high concentrations of Cd and Tl in the rhizosphere

The impairment of root growth and photosynthetical functioning are the main impacts of trace elements on woody plant seedlings. In this work, we assessed the response of Holm oak (Quercusilex subsp. ballota) and mastic shrub (Pistacia lentiscus) seedlings to high concentrations of Cd and Tl in the rhizosphere. These are non-essential trace elements, with a potential high mobility in the soil-plant system. Seedlings of these species are frequently used in the afforestation of degraded soils in mining areas. Plants were exposed to different levels of Cd (20, 80 and 200 mg L⁻¹) and Tl (2, 10 and 20 mg L⁻¹) in a sand culture. Biomass allocation, growth rates, chlorophyll fluorescence and gas exchange were studied. Both metals affected root biomass. Cadmium produced an increase in the root mass ratio and a decrease in the specific leaf area of the plants in oak seedlings, while Tl did not provoke such response. Mastic plants were more sensitive to Tl and Cd than oak plants. Between elements, Tl provoked more severe toxic effects in the plants, affecting the antennae complexes and reaction centers of the photosystem II. Both elements decreased net assimilation rates (down to a 20% of the control plants) and stomatal conductance (5-10% of the values for the control plants). Cadmium was highly retained in the roots of both species, while Tl was highly translocated into the leaves. In general, Holm oak showed a higher tolerance for Cd than for Tl, and a higher resistance to both metals than mastic shrub, due to a high capacity for Cd retention at the root level. However, such accumulation in roots may induce water stress in the seedling exposed to Cd.     

Mercury, lead and cadmium in human milk in relation to diet, lifestyle habits and sociodemographic variables in Madrid (Spain)

Background

Although breastfeeding is the ideal way of nurturing infants, it can be a source of exposure to toxicants. This study reports the concentration of Hg, Pb and Cd in breast milk from a sample of women drawn from the general population of the Madrid Region, and explores the association between metal levels and socio-demographic factors, lifestyle habits, diet and environmental exposures, including tobacco smoke, exposure at home and occupational exposures.

Methods

Breast milk was obtained from 100 women (20 mL) at around the third week postpartum. Pb, Cd and Hg levels were determined using Atomic Absorption Spectrometry. Metal levels were log-transformed due to non-normal distribution. Their association with the variables collected by questionnaire was assessed using linear regression models. Separate models were fitted for Hg, Pb and Cd, using univariate linear regression in a first step. Secondly, multivariate linear regression models were adjusted introducing potential confounders specific for each metal. Finally, a test for trend was performed in order to evaluate possible dose-response relationships between metal levels and changes in variables categories.

Results

Geometric mean Hg, Pb and Cd content in milk were 0.53 μg L⁻¹, 15.56 μg L⁻¹, and 1.31 μg L⁻¹, respectively. Decreases in Hg levels in older women and in those with a previous history of pregnancies and lactations suggested clearance of this metal over lifetime, though differences were not statistically significant, probably due to limited sample size. Lead concentrations increased with greater exposure to motor vehicle traffic and higher potato consumption. Increased Cd levels were associated with type of lactation and tended to increase with tobacco smoking.

Conclusions

Surveillance for the presence of heavy metals in human milk is needed. Smoking and dietary habits are the main factors linked to heavy metal levels in breast milk. Our results reinforce the need to strengthen national food safety programs and to further promote avoidance of unhealthy behaviors such as smoking during pregnancy.     

Exergy analysis as a tool for the integration of very complex energy systems: The case of carbonation/calcination CO2 systems in existing coal power plants

A common characteristic of carbon capture and storage systems is the important energy consumption associated with the CO₂ capture process. This important drawback can be solved with the analysis, synthesis and optimization of this type of energy systems. The second law of thermodynamics has proved to be an essential tool in power and chemical plant optimization. The exergy analysis method has demonstrated good results in the synthesis of complex systems and efficiency improvements in energy applications.In this paper, a synthesis of pinch analysis and second law analysis is used to show the optimum window design of the integration of a calcium looping cycle into an existing coal power plant for CO₂ capture. Results demonstrate that exergy analysis is an essential aid to reduce energy penalties in CO₂ capture energy systems. In particular, for the case of carbonation/calcination CO₂ systems integrated in existing coal power plants, almost 40% of the additional exergy consumption is available in the form of heat. Accordingly, the efficiency of the capture cycle depends strongly on the possibility of using this heat to produce extra steam (live, reheat and medium pressure) to generate extra power at steam turbine. The synthesis of pinch and second law analysis could reduce the additional coal consumption due to CO₂ capture 2.5 times, from 217 to 85 MW.     

The safety observer effect: the effects of conducting safety observations

INTRODUCTION: Some research suggests that conducting safety observations of another's safety performance may serve as an effective tool in increasing the safety performance of the observer. The primary purpose of the present study was to assess the effects of conducting safety observations on the postural safety performance of observers engaging in an assembly task for short time periods. The secondary objectives of the study were: (a) to measure productivity, and (b) to measure the accuracy of participant safety observations. METHOD: An ABC (A: baseline, B: information, C: observation) multiple-baseline design counterbalanced across postural behaviors (back, shoulder, and feet position) was implemented with six participants. RESULTS AND DISCUSSION: Substantial improvements in postural safety occurred after participants conducted safety observations, and these improvements did not appear to negatively affect productivity. Results also suggest that there is no relation between the accuracy of an observer's safety observation and their subsequent safety performance. IMPACT ON INDUSTRY: This research provides evidence that a safety observation process can function to increase safe postural behavior of observers. Thus, the implementation of such a process may contribute to the prevention of musculoskeletal disorders and related costs in the workplace.